The Maunakea Spectroscopic Explorer (MSE) will obtain millions of spectra each year in the optical to near-infrared, at low (R ~ 3,000) to high (R ~ 40,000) spectral resolution by observing >4,000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. One key metric of the success of MSE will be its survey speed, i.e. how many spectra of good signal-to-noise ratio will MSE be able to obtain every night and every year. This is defined at the higher level by the observing efficiency of the observatory and should be at least 80%, as indicated in the Science Requirements. In this paper we present the observing efficiency budget developed for MSE based on historical data at the Canada-France-Hawaii Telescope and other Maunakea Observatories. We describe the typical sequence of events at night to help us compute the observing efficiency and how we envision to optimize it to meet the science requirements.
The Maunakea Spectroscopic Explorer (MSE) project has completed its Conceptual Design Phase. This paper is a status report of the MSE project regarding its technical and programmatic progress. The technical status includes its conceptual design and system performance, and highlights findings and recommendations from the System and various subsystems design reviews. The programmatic status includes the project organization and management plan for the Preliminary Design Phase. In addition, this paper provides the latest information related to the permitting process for Maunakea construction.
The Maunakea Spectroscopic Explorer is a next-generation massively multiplexed spectroscopic facility currently under development in Hawaii. It is completely dedicated to large-scale spectroscopic surveys and will enable transformative science. In this white paper we summarize the science case and describe the current state of the project.
The Maunakea Spectroscopic Explorer (MSE) is replacement of the existing 3.6-m Canada France Hawaii Telescope into a dedicated wide field highly multiplexed fiber fed spectroscopic facility. MSE is capable of observing over four thousand science targets simultaneously in two resolution modes. The paper describes the unique instrument system capabilities and its components starting from the telescope prime focus and ending at the spectrograph suite. The instrument system components have completed their conceptual designs and they include a Sphinx positioner system, fiber transmission system, lo…
Maunakea Spectroscopic Explorer will be a 10-m class highly multiplexed survey telescope, including a segmented primary mirror and robotic fiber positioners at the prime focus. MSE will replace the Canada France Hawaii Telescope (CFHT) on the summit of Mauna Kea, Hawaii. The multiplexing includes an array of over four thousand fibres feeding banks of spectrographs several tens of meters away. We present an overview of the requirements flow-down for MSE, from Science Requirements Document to Observatory Requirements Document. We have developed the system performance budgets, along with updating…
The Maunakea Spectroscopic Explorer (MSE) will each year obtain millions of spectra in the optical to near-infrared, at low (R~3000) to high (R~40000) spectral resolution by observing >3000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. The architecture of MSE is an assembly of subsystems designed to meet the science requirements and describes what MSE will look like. In this paper we foc…
MSE will be a massively multiplexed survey telescope, including a segmented primary mirror which feeds fibers at the prime focus, including an array of approximately four thousand fibers, positioned precisely to feed banks of spectrographs several tens of meters away. We describe the process of mapping top-level requirements on MSE to technical specifications for subsystems located at the MSE prime focus. This includes the overall top-level requirements based on knowledge of similar systems at other telescopes and how those requirements were converted into specifications so that the subsystems…
The Maunakea Spectroscopic Explorer (MSE) will each year obtain millions of spectra in the optical to near-infrared, at low (R ~ 3,000) to high (R ~ 40,000) spectral resolution by observing >4,000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. One key metric of the success of MSE will be its survey speed, i.e. how many spectra of good signal-to-noise ratio will MSE be able to obtain every…
We present the results of an automated fibre optic test bench constructed at the University of Victoria as part of the Maunakea Spectroscopic Explorer (MSE) Fibre Transmission System (FiTS). In preparation for MSE-FiTS, we have begun characterizing the focal ratio degradation (FRD) of candidate multi-mode fibres with the ultimate goal of testing all ~4000 MSE fibres. To achieve this, we have built an optical bench to perform an automated version of the collimated beam test. Herein we present the design of the bench and discuss the automation of components by introducing the Big FiTS Fibre Wrap…
The Canada France Hawaii Telescope Corporation (CFHT) plans to repurpose its observatory on the summit of Maunakea and operate a new wide field spectroscopic survey telescope, the Maunakea Spectroscopic Explorer (MSE). MSE will upgrade the observatory with a larger 11.25m aperture telescope and equip it with dedicated instrumentation to capitalize on the site, which has some of the best seeing in the northern hemisphere, and offer its user community the ability to do transformative science. The knowledge and experience of the current CFHT staff will contribute greatly to the engineering of thi…
MSE is an 11.25m telescope with a 1.5 sq.deg. field of view. It can simultaneously obtain 3249 spectra at R=3000 from 360-1800nm, and 1083 spectra at R=40000 in the optical. Absolutely critical to the scientific success of MSE is to efficiently access the faint Universe. Here, we describe the adopted systems engineering methodology to ensure MSE meets the challenging sensitivity requirements, and how these requirements are partitioned across three budgets, relating to the throughput, noise and fiber injection efficiency. We then describe how the sensitivity of MSE as a system was estimated at …
MSE is an 11.25m telescope with a 1.5 sq.deg. field of view. It can simultaneously obtain 3249 spectra at R=3000 from 360-1800nm, and 1083 spectra at R=40000 in the optical. The large field of view, large number of targets, as well as the use of more than 4000 optical fibres to transport the light from the focal plane to the spectrographs, means that precise and accurate science calibration is difficult but essential to obtaining the science goals. As a large aperture telescope focusing on the faint Universe, precision sky subtraction and spectrophotometry are especially important. Here, we di…
This short document is intended as a companion and introduction to the Detailed Science Case (DSC) for the Maunakea Spectroscopic Explorer. It provides a concise summary of the essential characteristics of MSE from the perspective of the international astronomical community. MSE is a wide field telescope (1.5 square degree field of view) with an aperture of 11.25m. It is dedicated to multi-object spectroscopy at several different spectral resolutions in the range R ~ 2500 - 40000 over a broad wavelength range (0.36 - 1.8μm). MSE will enable transformational science in areas as diverse as exopl…
The Maunakea Spectroscopic Explorer (MSE) Project is a planned replacement for the existing 3.6-m Canada France Hawaii Telescope (CFHT) into a 10-m class dedicated wide field highly multiplexed fibre fed spectroscopic facility. MSE seeks to tackle basic science questions ranging from the origin of stars and stellar systems, Galaxy archaeology at early times, galaxy evolution across cosmic time, to cosmology and the nature of dark matter and dark energy. MSE will be a primary follow-up facility for many key future photometric and astrometric surveys, as well as a major component in the study of…
Optical designs are presented for the Maunakea Spectroscopic Explorer (MSE) telescope. The adopted baseline design is a prime focus telescope with a segmented primary of 11.25m aperture, with speed f/1.93 and 1.52deg field-of-view, optimized for wavelengths 360-1800nm. The Wide-Field Corrector (WFC) has five aspheric lenses, mostly of fused silica, with largest element 1.33m diameter and total glass mass 788kg. The Atmospheric Dispersion Corrector (ADC) is of the compensating lateral type, combining a motion of the entire WFC via the hexapod, with a restoring motion for a single lens. There is…
The Maunakea Spectroscopic Explorer (MSE) project will transform the CFHT 3.6m optical telescope to a 10m class dedicated multi-object spectroscopic facility, with an ability to measure thousands of objects with three spectral resolution modes respectively low resolution of R~3,000, moderate resolution of R~6,000 and high resolution of R~40,000. Two identical multi-object high resolution spectrographs are expected to simultaneously produce 1084 spectra with high resolution of 40,000 at Blue (401-416nm) and Green (472-489nm) channels, and 20,000 at Red (626-674nm) channel. At the Conceptual Des…
(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is intended as a concise reference guide to all aspects of the scientific and technical design of MSE, for the international astronomy and engineering communities, and related agencies. The current version is a status report of MSE's science goals and their practical implementation, following the System Conceptual Design Review, held in January 2018. MSE is a planned 10-m class, wide-field, optical and near-infrared facility, designed to enable transformative science, while filling a critical missing gap in the emerging inter…
We discuss how astrophysical observations with the Maunakea Spectroscopic Explorer (MSE), a high-multiplexity (about 4300 fibers), wide field-of-view (1.5 square degree), large telescope aperture (11.25 m) facility, can probe the particle nature of dark matter. MSE will conduct a suite of surveys that will provide critical input for determinations of the mass function, phase-space distribution, and internal density profiles of dark matter halos across all mass scales. N-body and hydrodynamical simulations of cold, warm, fuzzy and self-interacting dark matter suggest that non-trivial dynamics i…
MSE is an 11.25m aperture observatory with a 1.5 square degree field of view that will be fully dedicated to multi-object spectroscopy. More than 3200 fibres will feed spectrographs operating at low (R ~ 2000 - 3500) and moderate (R ~ 6000) spectral resolution, and approximately 1000 fibers will feed spectrographs operating at high (R ~ 40000) resolution. MSE is designed to enable transformational science in areas as diverse as tomographic mapping of the interstellar and intergalactic media; the in-situ chemical tagging of thick disk and halo stars; connecting galaxies to their large scale str…
(Abridged) The Maunakea Spectroscopic Explorer (MSE) is an end-to-end science platform for the design, execution and scientific exploitation of spectroscopic surveys. It will unveil the composition and dynamics of the faint Universe and impact nearly every field of astrophysics across all spatial scales, from individual stars to the largest scale structures in the Universe. Major pillars in the science program for MSE include (i) the ultimate Gaia follow-up facility for understanding the chemistry and dynamics of the distant Milky Way, including the outer disk and faint stellar halo at high sp…
