通过容忍早期保留损失和工艺变化来提高3D NAND闪存寿命
Improving 3D NAND Flash Memory Lifetime by Tolerating Early Retention Loss and Process Variation
摘要:
与平面(即,二维)NAND闪存,3D NAND闪存采用新的闪存单元设计,并在单个芯片中垂直堆叠数十个硅层。这允许3D NAND闪存使用比平面NAND闪存少得多的激进制造工艺技术来增加存储密度。3D NAND闪存中的电路级和结构变化显著改变了不同错误源如何影响存储器的可靠性。在本文中,通过对真实的、最先进的3D NAND闪存芯片的实验表征,我们发现3D NAND闪存表现出三个在平面NAND闪存中以前没有观察到的新的误差源:(1)层到层工艺变化,其中芯片中每个3D堆叠层的平均出错率显著不同;(2)早期保持损失,一种新现象,其中由于电荷泄漏而导致的错误数量在编程之后的几个小时内迅速增加;以及(3)保持干扰,一种新现象,其中电荷从闪存单元泄漏的速率取决于存储在相邻单元中的数据值。基于我们的实验结果,我们开发了新的分析模型的层到层的工艺变化和保留损失的三维NAND闪存。受我们的新发现和模型的启发,我们开发了四种新技术来减轻3D NAND闪存中的工艺变化和早期保留损失。这四种技术是互补的,并且可以结合在一起以显著地提高闪存可靠性。与最先进的基线相比,我们的技术相结合,可将闪存寿命提高1.85倍。或者,如果NAND闪存供应商希望保持3D NAND闪存设备的寿命恒定,则我们的技术将保存纠错信息所需的存储开销减少了78.9%。
英文摘要:
Compared to planar (i.e., two-dimensional) NAND flash memory, 3D NAND flash memory uses a new flash cell design, and vertically stacks dozens of silicon layers in a single chip. This allows 3D NAND flash memory to increase storage density using a much less aggressive manufacturing process technology than planar NAND flash memory. The circuit-level and structural changes in 3D NAND flash memory significantly alter how different error sources affect the reliability of the memory. In this paper, through experimental characterization of real, state-of-the-art 3D NAND flash memory chips, we find that 3D NAND flash memory exhibits three new error sources that were not previously observed in planar NAND flash memory: (1) layer-to-layer process variation, where the average error rate of each 3D-stacked layer in a chip is significantly different; (2) early retention loss, a new phenomenon where the number of errors due to charge leakage increases quickly within several hours after programming; and (3) retention interference, a new phenomenon where the rate at which charge leaks from a flash cell is dependent on the data value stored in the neighboring cell. Based on our experimental results, we develop new analytical models of layer-to-layer process variation and retention loss in 3D NAND flash memory. Motivated by our new findings and models, we develop four new techniques to mitigate process variation and early retention loss in 3D NAND flash memory. These four techniques are complementary, and can be combined together to significantly improve flash memory reliability. Compared to a state-of-the-art baseline, our techniques, when combined, improve flash memory lifetime by 1.85x. Alternatively, if a NAND flash vendor wants to keep the lifetime of the 3D NAND flash memory device constant, our techniques reduce the storage overhead required to hold error correction information by 78.9%.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。