GSM用不同馈电方式的1800 MHz平面偶极子天线设计
Planar Dipole Antenna Design At 1800MHz Band Using Different Feeding Methods For GSM Application
摘要:
本论文的研究工作主要是利用计算机软件技术CST工作室软件对一种适用于全球移动GSM系统的1800 MHz频段的平面偶极子天线进行设计和仿真。该天线结构上的耐火FR 4基板与相对常数为4.3 S/m。为了匹配50欧姆传输线,设计了通孔集成巴伦和四分之一波长开路短截线两种馈电结构。在长59 mm、宽4 mm的最佳尺寸下,通孔的回波损耗最大为25 dB,带宽为18.4%,驻波比为1.116V,当天线宽度从8 mm增加到10 mm时,带宽提高了25%~ 30%,回波损耗降低到15 dB。而长67 mm、宽6 mm、高1.6mm的开路短截线,最大回波损耗为47.88dB,带宽为17%,驻波比1.008小于2。天线基板影响天线性能的方式。较低的相对常数将导致较高的返回值,较窄的带宽和较好的辐射方向图在权衡谐振长度通孔和四分之一波长开放短截线是最方便的实际实现。
英文摘要:
This research work focuses on the design and simulation of a planar dipole antenna for 1800MHZ Band for Global System Mobile GSM application using Computer Software Technology CST studio software. The antenna is structured on a fire resistance FR4 substrate with a relative constant of 4.3 S/m. Two types of feeding configuration are designed to feed the antenna in order to match 50 ohm transmission lines which are via-hole integrated balun and quarter wavelength open stub. The via-hole is capable to provide maximum return loss of 25dB, bandwidth of 18.4 percent and the voltage standing wave ratio (VSWR) of 1.116 V at optimum dimension of length 59mm and width 4mm, the bandwidth is improved 25 percent to 30 percent by extending the width of the antenna 8 mm to 10 mm followed by deterioration of return loss value to 15dB. While the open stub at length of 67 mm, the width of 6 mm and height 1.6mm will provide max return loss of 47.88dB and bandwidth of 17 percent with VSWR 1.008 less than 2. The way that the antenna substrate has influenced the performance of the antenna. The lower relative constant will result in the higher return lows, narrower bandwidth and better radiation pattern in trade-off the resonant length Via-hole and then the quarter wave open stub are most convenient for practical implementation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。