高效电容去离子的频率分析和谐振操作
Frequency analysis and resonant operation for efficient capacitive deionization
摘要:
电容式去离子(CDI)性能指标可能因操作方法而有很大差异。我们在这里开发了一个理论,并通过实验证明了一个新的操作CDI,使用正弦强制电压(或正弦电流)。我们使用动态系统建模方法,量化的频率响应(振幅和相位)的CDI流出物浓度,并证明CDI可以建模为线性时不变系统。我们通过实验验证了该模型,并表明正弦电压操作可以同时实现高盐去除和强能量性能,从而很可能使其优于其他常规操作方法。基于基本的耦合现象的电荷(和离子)转移与大量对流在CDI,我们推导出并实验验证的概念,使用正弦电压强迫函数,以实现共振型操作的CDI。尽管系统的复杂性,我们发现一个简单的关系的谐振时间尺度:谐振时间周期是成比例的几何平均值的流动停留时间和电气(RC)充电时间。共振操作意味着去除的盐的绝对量(以摩尔计)和稀释(取决于处理的进料体积)之间的最佳平衡,从而导致脱盐水的最大平均浓度降低。使用基于傅立叶分析的通用工具,我们表明,大部分的盐去除(~95%)的方形和三角形电压强制波形是通过基本傅立叶(正弦)模式实现的。较高傅立叶模式的频率排除了这些模式的高流动效率,因此这些模式消耗额外的能量以去除最少的额外盐。这种高频模式的不足进一步突出了CDI操作的DC偏移正弦强制的优点。
英文摘要:
Capacitive deionization (CDI) performance metrics can vary widely with operating methods. We here develop a theory around and experimentally demonstrate a new operation for CDI that uses sinusoidal forcing voltage (or sinusoidal current). We use a dynamic system modeling approach, and quantify the frequency response (amplitude and phase) of CDI effluent concentration, and demonstrate that CDI can be modeled as a linear time invariant system. We validate this model with experiments, and show that a sinusoid voltage operation can simultaneously achieve high salt removal and strong energy performance, thus very likely making it superior to other conventional operating methods. Based on the underlying coupled phenomena of electrical charge (and ionic) transfer with bulk advection in CDI, we derive and validate experimentally the concept of using sinusoidal voltage forcing functions to achieve resonance-type operation for CDI. Despite the complexities of the system, we find a simple relation for the resonant time scale: the resonant time period is proportional to the geometric mean of the flow residence time and the electrical (RC) charging time. Operation at resonance implies the optimal balance between absolute amount of salt removed (in moles) and dilution (depending on the feed volume processed), thus resulting in the maximum average concentration reduction for the desalinated water. Using a generalized tool based on Fourier analysis, we show that most of the salt removal (~95%) for square and triangular voltage forcing waveforms is achieved by the fundamental Fourier (sinusoidal) mode. The frequency of higher Fourier modes precludes high flow efficiency for these modes, so these modes consume additional energy for minimal additional salt removed. This deficiency of higher frequency modes further highlights the advantage of DC-offset sinusoidal forcing for CDI operation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。