arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1805.02765eess.SYcs.SYmath.OCstat.AP
收藏

叶片弹簧的3D打印:加成型制造中闭环控制的演示

3D printing of a leaf spring: A demonstration of closed-loop control in additive manufacturing

Georgia Institute of Technology(佐治亚理工学院)

Kevin Garanger, Thanakorn Khamvilai, Eric Feron

AI总结:

本文通过3D打印叶片弹簧展示闭环控制在增材制造中的应用,通过调整填充密度实现目标刚度,使刚度误差从11.63%降至1.34%。

摘要:

本文提出在塑料物体打印过程中集成反馈控制回路。打印对象为由不同填充密度部分组成的叶片弹簧,这些部分的填充密度是控制变量。为实现预期刚度,每次完成部分后进行测量并相应调整填充密度,以闭环框架实现。通过闭环控制,最终刚度误差从11.63%降低到1.34%。该实验作为概念验证,展示了反馈控制在增材制造中的相关性。通过将打印过程和测量视为随机过程,本文展示了如何利用随机最优控制和卡尔曼滤波来提高由基础打印机制造的对象质量。

英文摘要:

This paper presents the integration of a feedback control loop during the printing of a plastic object using additive manufacturing. The printed object is a leaf spring made of several parts of different infill density values, which are the control variables in this problem. In order to achieve a desired objective stiffness, measurements are taken after each part is completed and the infill density is adjusted accordingly in a closed-loop framework. The absolute error in the stiffness at the end of printing is reduced from 11.63% to 1.34% by using a closed-loop instead of an open-loop control. This experiments serves as a proof of concept to show the relevance of using feedback control in additive manufacturing. By considering the printing process and the measurements as stochastic processes, we show how stochastic optimal control and Kalman filtering can be used to improve the quality of objects manufactured with rudimentary printers.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑