Rapid response and short time latency are very important for Time Domain Astronomy, such as the observations of Gamma-ray Bursts (GRBs) and electromagnetic (EM) counterparts of gravitational waves (GWs). Based on the near real-time Fermi/GBM data, we developed a low-latency pipeline to automatically calculate the temporal and spectral properties of GRBs. With this pipeline, some important parameters can be obtained, such as T90 and fluence, within ~20 minutes after the GRB trigger. For ~90% GRBs, T90 and fluence are consistent with the GBM catalog results within 2 sigma errors. This pipeline has been used by the Gamma-ray Bursts Polarimeter (POLAR) and the Insight Hard X-ray Modulation Telescope (Insight-HXMT) to follow up the bursts of interest. For GRB 170817A, the first EM counterpart of GW events detected by Fermi/GBM and INTEGRAL/SPI-ACS, the pipeline gave T90 and spectral information in 21 minutes after the GBM trigger, providing important information for POLAR and Insight-HXMT observations.
We report on recent inter-calibration studies featuring Swift's Burst Alert Telescope (BAT) and Fermi's Gamma-ray Burst Monitor (GBM) based upon correlated observations of GRBs 080804 and 080810, via their resultant joint spectral analysis. Swift's intrinsic multi-wavelength instrumentation and dynamical response complement Fermi's superior energy range. The addition of BAT's spectral response will (i) facilitate in-orbit GBM detector response calibration, (ii) augment Fermi's low energy sensitivity, (iii) enable ground-based follow-up efforts of Fermi GRBs, and (iv) help identify a subset of …
We detail the improvements made to the targeted offline search of Fermi-GBM data for coincident signals to LIGO gravitational wave triggers. Description of the changes are included, as well as comparisons between the ranking statistics and False Alarm Rate distributions for the search during LIGO O1 and O2.
A recent work has found a tight global relation between the GRB prompt fluence, peak flux (based on the optimum time scale determined from the Bayesian Blocks-based analysis) and duration using data from the Fermi Gamma-Ray burst monitor, which they have dubbed as "Fundamental Plane". We quantitatively characterize the tightness of this Fundamental Plane relation by calculating the scatter in dex. We also check for a fundamental plane using the peak flux over time scales of 64 ms, 256 ms and 1024 ms. For our analysis, we incorporate the uncertainties in the above observables and carried out bo…
The Fermi Gamma-ray Burst Monitor (GBM) has detected over 1400 Gamma-Ray Bursts (GRBs) since it began science operations in July, 2008. We use a subset of over 300 GRBs localized by instruments such as Swift, the Fermi Large Area Telescope, INTEGRAL, and MAXI, or through triangulations from the InterPlanetary Network (IPN), to analyze the accuracy of GBM GRB localizations. We find that the reported statistical uncertainties on GBM localizations, which can be as small as 1 degree, underestimate the distance of the GBM positions to the true GRB locations and we attribute this to systematic uncer…
The capability of the Fermi Gamma-ray Burst Monitor (GBM) to localize gamma-ray bursts (GRBs) is evaluated for two different automated algorithms: the GBM Team's RoboBA algorithm and the independently developed BALROG algorithm. Through a systematic study utilizing over 500 GRBs with known locations from instruments like Swift and the Fermi LAT, we directly compare the effectiveness of, and accurately estimate the systematic uncertainty for, both algorithms. We show simple adjustments to the GBM Team's RoboBA, in operation since early 2016, yields significant improvement in the systematic unce…
INTEGRAL/SPI is a coded mask instrument observing since 2002 in the keV to MeV energy range, which covers the peak of the $νFν$ spectrum of most Gamma-Ray Bursts (GRBs). Since its launch in 2008, Fermi/GBM has been the primary instrument for analyzing GRBs in the energy range between $\approx$ 10 keV to $\approx$ 10 MeV. Herein, we show that SPI, covering a similar energy range, can give equivalently constraining results for some parameters if we use an advanced analysis method. Also, combining the data of both instruments reduces the allowed parameter space in spectral fits. The main advantag…
We present a method for determining the background of Fermi GBM GRBs using the satellite positional information and a physical model. Since the polynomial fitting method typically used for GRBs is generally only indicative of the background over relatively short timescales, this method is particularly useful in the cases of long GRBs or those which have Autonomous Repoint Request (ARR) and a background with much variability on short timescales. We give a Direction Dependent Background Fitting (DDBF) method for separating the motion effects from the real data and calculate the duration (T90 and…
We present the first physically motivated background model for the Gamma-Ray Burst Monitor (GBM) onboard the Fermi satellite. Such a physically motivated background model has the potential to significantly improve the scientific output of Fermi/GBM, as it can be used to improve the background estimate for spectral analysis and localization of Gamma-Ray Bursts (GRBs) and other sources. Additionally, it can also lead to detections of new transient events, since long/weak or slowly rising ones do not activate one of the existing trigger algorithms. In this paper we show the derivation of such a p…
Discerning the radiative dissipation mechanism for prompt emission in Gamma-Ray Bursts (GRBs) requires detailed spectroscopic modeling that straddles the $νF_ν$ peak in the 100 keV - 1 MeV range. Historically, empirical fits such as the popular Band function have been employed with considerable success in interpreting the observations. While extrapolations of the Band parameters can provide some physical insight into the emission mechanisms responsible for GRBs, these inferences do not provide a unique way of discerning between models. By fitting physical models directly this degeneracy can be…
The supporting instrument on board the Fermi Gamma-ray Space Telescope, the Gamma-ray Burst Monitor (GBM) is a wide-field gamma-ray monitor composed of 14 individual scintillation detectors, with a field of view which encompasses the entire unocculted sky. Primarily designed as transient monitors, the conventional method for background determination with GBM-like instruments is to time interpolate intervals before and after the source as a polynomial. This is generally sufficient for sharp impulsive phenomena such as Gamma-Ray Bursts (GRBs) which are characterised by impulsive peaks with sharp…
The secondary instrument onboard Fermi, the Gamma-ray Burst Monitor (GBM) is an all sky monitor consisting of 14 scintillation detectors. When analysing transient events such as Gamma-Ray Bursts (GRBs) and Solar Flares (SFs) the background is usually modelled as a polynomial (order 0-4). However, for long events the background may vary more than can be accounted for with a simple polynomial. In these cases a more accurate knowledge of GBM's background rates is required. Here we present an alternative method of both determining the background and distinguishing low-level emission from the instr…
The accurate spatial location of gamma-ray bursts (GRBs) is crucial for both producing a detector response matrix (DRM) and follow-up observations by other instruments. The Fermi Gamma-ray Burst Monitor (GBM) has the largest field of view (FOV) for detecting GRBs as it views the entire unocculted sky, but as a non-imaging instrument it relies on the relative count rates observed in each of its 14 detectors to localize transients. Improving its ability to accurately locate GRBs and other transients is vital to the paradigm of multi-messenger astronomy, including the electromagnetic follow-up of…
In the context of time domain astronomy, we present an offline detection search of gamma-ray transients using a wild binary segmentation analysis called FWBSB targeting both short and long gamma-ray bursts (GRBs) and covering the soft and hard gamma-ray bands. We use NASA Fermi/GBM archival data as a training and testing data set. This paper describes the analysis applied to the 12 NaI detectors of the Fermi/GBM instrument. This includes background removal, change-point detection that brackets the peaks of gamma-ray flares, the evaluation of significance for each individual GBM detector and th…
Implications of Joint Spectral Analysis of Gamma-Ray Bursts detected by Fermi Large Area Telescope and Gamma-ray Burst Monitor on Phenomenological Correlations
We report the discovery of the optical afterglow of the gamma-ray burst (GRB) 130702A, identified upon searching 71 square degrees surrounding the Fermi Gamma-ray Burst Monitor (GBM) localization. Discovered and characterized by the intermediate Palomar Transient Factory (iPTF), iPTF13bxl is the first afterglow discovered solely based on a GBM localization. Real-time image subtraction, machine learning, human vetting, and rapid response multi-wavelength follow-up enabled us to quickly narrow a list of 27,004 optical transient candidates to a single afterglow-like source. Detection of a new, fa…
The Gamma-Ray Burst Monitor (GBM) will significantly augment the science return from the Fermi Observatory in the study of Gamma-Ray Bursts (GRBs). The primary objective of GBM is to extend the energy range over which bursts are observed downward from the energy range of the Large Area Telescope (LAT) on Fermi into the hard X-ray range where extensive previous data exist. A secondary objective is to compute burst locations on-board to allow re-orientiong the spacecraft so that the LAT can observe delayed emission from bright bursts. GBM uses an array of twelve sodium iodide scintillators and t…
The soft gamma-ray telescope ECLAIRs with its Scientific Trigger Unit is in charge of detecting Gamma-Ray Bursts (GRBs) on-board the future SVOM satellite. Using the "scientific software model" (SSM), we study the efficiency of both implemented trigger algorithms, the Count-Rate Trigger for time-scales below 20s and the Image Trigger for larger ones. The SMM provides a simulation of ECLAIRs with photon projection through the coded-mask onto the detection plane. We developed an input GRB database for the SSM based on GRBs light curves detected by the Fermi GBM instrument. We extrapolated the GR…
