Successful assembly of suspended nanoscale rod-like particles depends on fundamental phenomena controlling rotational and translational diffusion. Despite the significant developments in fluidic fabrication of nanostructured materials, the ability to quantify the dynamics in processing systems remains challenging. Here we demonstrate an experimental method for characterization of the orientation dynamics of nanorod suspensions in assembly flows using birefringence relaxation. The methodology is illustrated using nanocelluloses (cellulose nanocrystals and nanofibrils) as model systems, where the coupling of rotational diffusion coefficients to particle size distributions as well as flow-induced orientation mechanisms are elucidated. Our observations advance the knowledge on key fundamental nanoscale mechanisms governing the dynamics of nanotubes and nanorods allowing bottom-up assembly into hierarchical superstructures.
Shearing of nanocomposites has shown to produce ordered nanostructures and orientation in the polymeric matrix. Due to the importance of the formation of an ordered structure of nanoparticles in a polymeric matrix to device wearable, flexible and photonic materials, its useful to get an insight of the shear-induced ordering and other properties of the polymeric nanocomposites. In this paper, we use a model Wormlike micellar matrix to study the arrangement and morphology of nanoparticles in the composite when the system is sheared using a hybrid multiparticle dynamics and molecular dynamics sim…
Using Monte Carlo simulations, we investigate the self-assembly of model nanoparticles inside a matrix of model equilibrium polymers (or matrix of Wormlike micelles) as a function of the polymeric matrix density and the excluded volume parameter between polymers and nanoparticles. In this paper, we show morphological transitions in the system architecture via synergistic self-assembly of nanoparticles and the equilibrium polymers. In a synergistic self-assembly, the resulting morphology of the system is a result of the interaction between both nanoparticles and the polymers, unlike the polymer…
It has recently been proposed that the miscibility of nanoparticles with a polymer matrix can be controlled by grafting polymer chains to the nanoparticle surface. As a first step to study this situation, we have used molecular dynamics simulations on a single nanoparticle of radius R ($4σ\le$R$\le 16σ$, where $σ$ is the diameter of a polymer monomer) grafted with chains of length 500 in a polymer melt of chains of length 1000. The grafting density $Σ$ was varied between $0.04$-$0.32$ chains/$σ^2$. To facilitate equilibration a Monte Carlo double-bridging algorithm is applied - new bonds are f…
We study the scaling of adsorption isotherms of polyacrylic dispersants on generic surfaces of metallic oxides $XnOm$ as a function of the number of monomeric units, using Electrostatic Dissipative Particle Dynamics simulations. The simulations show how the scaling properties in these systems emerge and how the isotherms rescale to a universal curve, reproducing reported experimental results. The critical exponent for these systems is also obtained, in perfect agreement with the scaling theory of deGennes. Some important applications are mentioned.
We present a new simulation technique to study systems of polymers functionalized by reactive sites that bind/unbind forming reversible linkages. Functionalized polymers feature self-assembly and responsive properties that are unmatched by systems lacking selective interactions. The scales at which the functional properties of these materials emerge are difficult to model, especially in the reversible regime where such properties result from many binding/unbinding events. This difficulty is related to large entropic barriers associated with the formation of intra-molecular loops. In this work …
We present the results from dissipative particle dynamics (DPD) simulations of phase separation dynamics in ternary (ABC) fluids mixture in $d=3$ where components A and B represent the simple fluids and component C represents a polymeric fluid. Here, we study the role of polymeric fluid (C) on domain morphology by varying composition ratio, polymer chain length, and polymer stiffness. We observe that the system under consideration lies in the same dynamical universality class as a simple ternary fluids mixture. However, the scaling functions depend upon the parameters mentioned above as they c…
The linear and nonlinear rheological behavior of two rod-like particle suspensions as a function of concentration is studied using small amplitude oscillatory shear, steady shear and capillary breakup extensional rheometry. The rod-like suspensions are composed of fd virus and its mutant fdY21M, which are perfectly monodisperse, with a length on the order of 900 nm. The particles are semi flexible yet differ in their persistence length. The effect of stiffness on the rheological behavior in both, shear and extensional flow, is investigated experimentally. The linear viscoelastic shear data is …
A novel type of hybrid colloids is presented, based on the association of several polymeric systems and ferrofluids. On the one hand, we use inorganic nanoparticles made of magnetic iron oxide prepared at the LI2C, which response to a magnetic field of low intensity. On the other hand the organic part is made either of long linear polyacrylamide chains or of mesoscopic structures (vesicles and micelles) self-assembled from amphiphile polybutadiene-b-poly(glutamic acid) di-block copolymers, which conformation is pH-sensitive.
We investigated the formation of cocontinuous structures in polymer blends. These polymeric bijels (bicontinuous interfacially jammed emulsion gels) were composed of polystyrene oligomer, polybutene and fluorescent hydrophobic silica nanoparticles. A micron-sized cocontinuous morphology was stabilized by a monolayer of silica nanoparticles at the interface. Real-time observation of coalescence dynamics in co-continuous polymer blends stabilized by interfacial particles was for the first time achieved via laser scanning confocal microscopy. We demonstrated that suppression of coalescence arises…
We report many different nano-structures which are formed when model nano-particles of different sizes (diameter σ n ) are allowed to aggregate in a background matrix of semi-flexible self assembled polymeric worm like micellar chains. The different nano-structures are formed by the dynamical arrest of phase-separating mixtures of micellar monomers and nano-particles. The different mor- phologies obtained are the result of an interplay of the available free volume, the elastic energy of deformation of polymers, the density (chemical potential) of the nano-particles in the polymer ma- trix and,…
We present a hybrid simulation method which allows one to study the dynamical evolution of self-assembling (co)polymer solutions in the presence of hydrodynamic interactions. The method combines an established dynamic density functional theory for polymers that accounts for the nonlocal character of chain dynamics at the level of the Rouse model, the external potential dynamics (EPD) model, with an established Navier-Stokes solver, the Lattice Boltzmann (LB) method. We apply the method to study the self-assembly of nanoparticles and vesicles in two-dimensional copolymer solutions in a typical …
Field-theoretical method is efficient in predicting the assembling structures of polymeric systems. However, for the polymer/nanoparticle mixture, the continuous density description is not suitable to capture the realistic assembly of particles, especially when the size of particle is much larger than the polymer segment. Here, we developed a field-based model, in which the particles are eventually discrete and hence it can overcome the drawbacks of the conventional field descriptions, e.g., inadequate and crude treatment on the polymer-particle interface and the excluded-volume interaction. W…
The structural features of polystyrene brushes grafted on spherical silica nanoparticles immersed in polystyrene are investigated by means of a Monte Carlo methodology based on polymer mean field theory. The nanoparticle radii (either 8 nm or 13 nm) are held constant, while the grafting density and the lengths of grafted and matrix chains are varied systematically in a series of simulations. The primary objective of this work is to simulate realistic nanocomposite systems of specific chemistry at experimentally accessible length scales and study the structure and scaling of the grafted brush. …
Nanoscale polymeric thin films are widely used in diverse applications such as energy devices, flexible electronics and biosensors, where a satisfactory mechanical performance is of vital importance to realize their full functionality. It has been evidenced that the elastic properties of polymer films are often strongly affected by their thickness; however, the underlying mechanism of this phenomenon, especially a thorough understanding at the microscopic level, has yet to be achieved. Here we established a coarse-grained molecular dynamics (CGMD) based computational framework, combining with …
Understanding dynamic and complex interaction of biological membranes with extracellular matrices plays a crucial role in controlling a variety of cell behavior and functions, from cell adhesion and growth to signaling and differentiation. Tremendous interest in tissue engineering has made it possible to design polymeric scaffolds mimicking the topology and mechanical properties of the native extracellular microenvironment; however, a fundamental question remains unanswered: that is, how the viscoelastic extracellular environment modifies the hierarchical dynamics of lipid membranes. In this w…
Large-scale molecular dynamics simulations are used to simulate a layer of nanoparticles diffusing on the surface of a liquid. Both a low viscosity liquid, represented by Lennard-Jones monomers, and a high viscosity liquid, represented by linear homopolymers, are studied. The organization and diffusion of the nanoparticles are analyzed as the nanoparticle density and the contact angle between the nanoparticles and liquid are varied. When the interaction between the nanoparticles and liquid is reduced the contact angle increases and the nanoparticles ride higher on the liquid surface, which ena…
Polymeric nanoparticles (NPs) have a great application potential in science and technology. Their functionality strongly depends on their size. We present a theory for the size of NPs formed by precipitation of polymers into a bad solvent in the presence of a stabilizing surfactant. The analytical theory is based upon diffusion-limited coalescence kinetics of the polymers. Two relevant time scales, a mixing and a coalescence time, are identified and their ratio is shown to determine the final NP diameter. The size is found to scale in a universal manner and is predominantly sensitive to the mi…
We study the nonlinear dynamics of single-domain ferromagnetic nanoparticles in a viscous liquid induced by a harmonically oscillating gradient magnetic field in the absence and presence of a static uniform magnetic field. Under some physically reasonable assumptions, we derive a coupled set of stiff ordinary differential equations for the magnetization angle and particle coordinate describing the rotational and translational motions of nanoparticles. Analytical solutions of these equations are determined for nanoparticles near and far from the coordinate origin, and their correctness is confi…
A method of simulating the drying process of a soft matter solution with an implicit solvent model by moving the liquid-vapor interface is applied to various solution films and droplets. For a solution of a polymer and nanoparticles, we observe "polymer-on-top" stratification, similar to that found previously with an explicit solvent model. Furthermore, "polymer-on-top" is found even when the nanoparticle size is smaller than the radius of gyration of the polymer chains. For a suspension droplet of a bidisperse mixture of nanoparticles, we show that core-shell clusters of nanoparticles can be …
The structure of a polystyrene matrix filled with tightly cross-linked polystyrene nanoparticles, forming an athermal nanocomposite system, is investigated by means of a Monte Carlo sampling formalism. The polymer chains are represented as random walks and the system is described through a coarse grained Hamiltonian. This approach is related to self-consistent-field theory but does not invoke a saddle point approximation and is suitable for treating large three-dimensional systems. The local structure of the polymer matrix in the vicinity of the nanoparticles is found to be different in many w…
We demonstrate a general and robust method to confine on a plane strongly diffusing submicrometer particles in water by using size tunable magnetic channels. These virtual conduits are realized with pairs of movable Bloch walls (BWs) located within an epitaxially grown ferrite garnet film. We show that, once inside the magnetic conduit, the particles experience an effective local parabolic potential in the transverse direction, while freely diffusing along the conduit. The stiffness of the magnetic potential is determined as a function of field amplitude which varies the width of the magnetic …
The dynamic behavior of a partially wetting polymer droplet driven over a nanostructured interface is studied using molecular dynamics simulations. We consider the bead-spring model to represent a polymeric liquid that partially wets a rough surface composed of a periodic array of spherical particles. It is shown that at sufficiently small values of the external force, the droplet remains pinned at the particles' surface, while above the threshold, its motion consists of alternating periods of pinning and rapid displacements between neighboring particles. The latter process involves large peri…
Polymer nanoparticle composites (PNC) with ultra high loading of nanoparticles (> 50%) have been shown to exhibit markedly improved strength, stiffness, and toughness simultaneously compared to the neat systems of their components. Recent experimental studies on the effect of polymer fill fraction in these highly loaded PNCs reveal that even at low polymer fill fractions, hardness and modulus increase significantly. In this work, we aim to understand the origin of these performance enhancements by examining the dynamics of both polymer and nanoparticles (NP) under tensile deformation. We perfo…
The properties of polymeric nanofibers can be tailored and enhanced by properly managing the structure of the polymeric molecules at the nanoscale. Although electrospun polymer fibers are increasingly exploited in many technological applications, their internal nanostructure, determining their improved physical properties, is still poorly investigated and understood. Here, we unravel the internal structure of electrospun functional nanofibers made by prototype conjugated polymers. The unique features of near field optical measurements are exploited to investigate the nanoscale spatial variatio…
Particle shape is a critical parameter that plays an important role in self-assembly, for example, in designing targeted complex structures with desired properties. In the last decades an unprecedented range of monodisperse nanoparticle systems with control over the shape of the particles have become available. In contrast, the choice of micron-sized colloidal building blocks of particles with flat facets, i.e., particles with polygonal shapes, is significantly more limited. This can be attributed to the fact that, contrary to nanoparticles, the larger colloids are significantly harder to synt…
A paradigm proposed recently by Boal et al. (A.K. Boal et al., Nature 404, 746-748, 2000) deals with the possibility to use inorganic nanoparticles as building blocks for the design and fabrication of colloidal and supracolloidal assemblies. It is anticipated that these constructs could be made of different shapes, patterns and functionalities and could constitute the components of future nanodevices including sensors, actuators or nanocircuits. Here we report a protocol that allowed us to fabricate such nanoparticle aggregates. The building blocks of the constructs were anionically coated iro…
The transport of nanoparticles (NPs) in polymer networks, as a typical simplified model describing various structures in living systems, is profoundly important in biomedical engineering and nanotechnology. Predicting the effective diffusivity of NP confined in an ordered network has been an intriguing focus in this frontier field. In the present study, the diffusion of NPs in an unentangled polymer network for different NP radii and network stiffness is numerically investigated by single particle dissipative particle dynamics (DPD). It is found that, the deformation due to the junction deviat…
Ferrogels and magnetoelastomers are composite materials obtained by embedding magnetic particles of mesoscopic size in a crosslinked polymeric matrix. They combine the reversible elastic deformability of polymeric materials with the high responsivity of ferrofluids to external magnetic fields. These materials stand out, for example, for large magnetostriction as well as significant increase of the elastic moduli in the presence of external magnetic fields. By means of X-ray micro-computed tomography, position and size of each magnetic particle can be measured with a high degree of accuracy. We…
We report on the growth of nanostructured rods fabricated by electrostatic co-assembly between iron oxide nanoparticles and polymers. The nanoparticles put under scrutiny, γ-Fe2O3 or maghemite, have diameter of 6.7 nm and 8.3 nm and narrow polydispersity. The co-assembly is driven by i) the electrostatic interactions between the polymers and the particles, and by ii) the presence of an externally applied magnetic field. The rods are characterized by large anisotropy factors, with diameter 200 nm and length comprised between 1 and 100 μm. In the present work, we provide for the first time the m…
Nanoparticles, such as viruses, can enter cells via endocytosis. During endocytosis, the cell surface wraps around the nanoparticle to effectively eat it. Prior focus has been on how nanoparticle size and shape impacts endocytosis. However, inspired by the noted presence of extracellular vimentin affecting viral and bacteria uptake, as well as the structure of coronaviruses, we construct a computational model in which both the cell-like construct and the virus-like construct contain filamentous protein structures protruding from their surfaces. We then study the impact of these additional degr…
