arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1712.01201physics.flu-dyn
收藏

带电障碍物增强动电能转换效率

Charged Obstacles Augment Electrokinetic Energy Conversion Efficiency

Tanoy Kahali, Antarip Poddar, Jayabrata Dhar, Suman Chakraborty

摘要:

在本研究中,我们描绘了引入流动障碍物的流动潜力和能量转换效率的影响,在一个狭窄的流体限制考虑到壁的流体动力学滑移,有限的离子尺寸,和当地的介电常数变化的影响。我们考虑了两种类型的流动障碍物的几何图案之间的规则的图案被证明是更有效的。观察到,实施半径大于通道高度的10%且电荷密度比(流动障碍物表面的电荷密度与通道壁的电荷密度)大于或等于9的结构化流动障碍物使得发电效率显著提高。另一方面,对于小于或等于通道高度的10%的障碍物半径,在电荷密度比~1下操作是有效的。为了获得最佳的能量转换效率,必须保持0.6或更大的有效归一化节距长度。我们发现,实施荷电流动障碍物导致显着提高的能量转换效率(约18%,具有规则的图案)相比,平面狭缝通道(约4%),不考虑壁流体动力学滑移和空间效应。引入有限离子尺寸和壁面流体动力学滑移效应,与窄约束流动相关,导致动电能转换效率的进一步提高。

英文摘要:

In the present study, we delineate the effect of introducing flow obstructions on streaming potential and energy conversion efficiency in a narrow fluidic confinement taking into consideration the wall hydrodynamic slip, finite ionic size, and local permittivity variation effects. We consider two types of the geometric pattern of flow obstacle between which regular pattern turns out to be more effective. It is observed that, implementing structured flow obstacles of radii greater than 10% of channel height and charge density ratio (charge density of flow obstacle surface to that of channel wall) greater than or equal to 9 renders significant enhancement of power generation efficiency. On the other hand, it is effective to operate at a charge density ratio~1 for obstacles radii less than or equal to 10% of channel height. An effective normalized pitch length of magnitude 0.6 or above has to be maintained in order to obtain optimum energy conversion efficiency. We found that implementation of charged flow obstacle causes a significant enhancement of energy conversion efficiency (~18% with regular pattern) comparing to planar slit channel (~4%) without considering wall hydrodynamic slip and steric effects. Introducing finite ionic size and wall hydrodynamic slip effect, pertinent to flows in narrow confinement, leads to further enhancement in electrokinetic energy conversion efficiency.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑