arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1711.09809astro-ph.EP
收藏

彗星上的热断裂。67 P/Churyumov-Gerasimenko

Thermal fracturing on comets. Applications to 67P/Churyumov-Gerasimenko

N. Attree, O. Groussin, L. Jorda, S. Rodionov, A-T. Auger, N. Thomas, Y. Brouet, O. Poch, E. Kührt, M. Knapmeyer, F. Preusker, F. Scholten, J. Knollenberg, S. Hviid, P. Hartogh

摘要:

我们模拟了温度变化引起的应力在彗星67 P/Churyumov-Gerasimenko表面附近的一个假定的硬层的热粘弹性模型。正如实验室实验和计算机模拟所表明的那样,这种层可能是由水冰(和尘埃颗粒)的再凝结或烧结形成的,并将解释菲莱着陆器上的实验所遇到的高抗压强度。季节性日照变化引起的温度变化渗透到彗星表面的深度,由热惯性控制,导致材料膨胀和收缩。在球形核上用麦克斯韦粘弹性响应对此进行建模,我们表明,与火星永久冻土具有相似特性的坚硬冰层将经历高应力:高达数十MPa,超过其材料强度(几MPa),深至厘米至一米。当考虑彗星的复杂形状但忽略热惯性时,定性地证实了应力随纬度的分布。应力被认为是相当的材料强度无处不在足够的热惯性($\gtrsim50$ J m $^{-2}$ K $^{-1}$ s $^{-1/2}$)和冰含量($\gtrsim 45\%$在赤道)。在这种情况下,应力渗透到一个典型的深度为$\sim0.25$米,符合米级的热收缩裂纹多边形检测彗星。热破裂可能是彗星表面的一个重要侵蚀过程,它会分解物质并削弱悬崖。

英文摘要:

We simulate the stresses induced by temperature changes in a putative hard layer near the surface of comet 67P/Churyumov--Gerasimenko with a thermo-viscoelastic model. Such a layer could be formed by the recondensation or sintering of water ice (and dust grains), as suggested by laboratory experiments and computer simulations, and would explain the high compressive strength encountered by experiments on board the Philae lander. Changes in temperature from seasonal insolation variation penetrate into the comet's surface to depths controlled by the thermal inertia, causing the material to expand and contract. Modelling this with a Maxwellian viscoelastic response on a spherical nucleus, we show that a hard, icy layer with similar properties to Martian permafrost will experience high stresses: up to tens of MPa, which exceed its material strength (a few MPa), down to depths of centimetres to a metre. The stress distribution with latitude is confirmed qualitatively when taking into account the comet's complex shape but neglecting thermal inertia. Stress is found to be comparable to the material strength everywhere for sufficient thermal inertia ($\gtrsim50$ J m$^{-2}$ K$^{-1}$ s$^{-1/2}$) and ice content ($\gtrsim 45\%$ at the equator). In this case, stresses penetrate to a typical depth of $\sim0.25$ m, consistent with the detection of metre-scale thermal contraction crack polygons all over the comet. Thermal fracturing may be an important erosion process on cometary surfaces which breaks down material and weakens cliffs.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑