The recent discovery of gravitational waves by the LIGO-Virgo collaboration created renewed interest in the investigation of alternative gravitational detector designs, such as small scale resonant detectors. In this article, it is shown how proposed small scale detectors can be tested by generating dynamical gravitational fields with appropriate distributions of moving masses. A series of interesting experiments will be possible with this setup. In particular, small scale detectors can be tested very early in the development phase and tests can be used to progress quickly in their development. This could contribute to the emerging field of gravitational wave astronomy.
An extension of the input-output relation for a conventional Michelson interferometric gravitational-wave detector is carried out to treat an arbitrary coherent state for the injected optical beam. This extension is one of necessary researches toward the clarification of the relation between conventional gravitational-wave detectors and a simple model of a gravitational-wave detector inspired by weak-measurements in [A.~Nishizawa, Phys. Rev. A {\bf 92} (2015), 032123.]. The derived input-output relation describes not only a conventional Michelson-interferometric gravitational-wave detector but…
We propose a new optical configuration for an interferometric gravitational wave detector based on the speedmeter concept using a sloshing cavity. Speedmeters provide an inherently better quantum-noise limited sensitivity at low frequencies than the currently used Michelson interferometers. We show that a practical sloshing cavity can be added relatively simply to an existing dual-recycled Michelson interferometer such as Advanced LIGO.
The effects of local Lorentz violation on dispersion and birefringence of gravitational waves are investigated. The covariant dispersion relation for gravitational waves involving gauge-invariant Lorentz-violating operators of arbitrary mass dimension is constructed. The chirp signal from the gravitational-wave event GW150914 is used to place numerous first constraints on gravitational Lorentz violation.
We investigate a Bose-Einstein condensate (BEC) as a gravitational wave detector, and study its sensitivity by optimizing the properties of the condensate and the measurement duration. We show that detecting kilohertz gravitational waves is limited by current experimental techniques in squeezing BEC phonons. Future improvements in technology to squeeze BEC states can make them competitive detectors for gravitational waves of astrophysical and/or cosmological origin.
The second generation of gravitational-wave detectors are being built and tuned all over the world. The detection of signals from binary black holes is beginning to fulfill the promise of gravitational-wave astronomy. In this work, we examine several possible configurations for third-generation laser interferometers in existing km-scale facilities. We propose a set of astrophysically motivated metrics to evaluate detector performance. We measure the impact of detector design choices against these metrics, providing a quantitative cost-benefit analyses of the resulting scientific payoffs.
In situ substrate birefringence characterization in gravitational wave detectors using a heterodyne polarimetry method
Cardiff University（卡迪夫大学）；The University of Tokyo（东京大学）；University of Birmingham（伯明翰大学）；Nikhef, National Institute for Subatomic Physics（荷兰国家亚原子物理研究所）；University of Glasgow（格拉斯哥大学）；Universit‘ a di Trento（特伦托大学）
Based on the Szekeres-Pirani gravitational compass we suggest the addition of a fourth, non-coplanar mass/mirror to the presently existing laser based gravitational wave observatories, enabling them to operate omnidirectionally, to filter out ambiguous interpretations and to point out the direction of the gravitational wave source.
The gravitational wave detector of higher sensitivity and greater bandwidth in kilohertz window is required for future gravitational wave astronomy and cosmology. Here we present a new type broadband high frequency laser interferometer gravitational wave detector utilizing polarization of light as signal carrier. Except for Fabry-Perot cavity arms we introduce dual power recycling to further amplify the gravitational wave signals. A novel method of weak measurement amplification is used to amplify signals for detection and to guarantee the long-term run of detector. Equipped with squeezed ligh…
The Heisenberg uncertainty principle gets modified by the introduction of an observer independent minimal length. In this work we have considered the resonant gravitational wave detector in the modified uncertainty principle framework where we have used the position momentum uncertainty relation with a quadratic order correction only. We have then used the path integral approach to calculate an action for the bar detector in presence of a gravitational wave and then derived the Lagrangian of the system leading to the equation of motion for the configuration-space position coordinate in one dim…
We optimize the third-generation gravitational-wave detector to maximize the range to detect core-collapse supernovae. Based on three-dimensional simulations for core-collapse and the corresponding gravitational-wave waveform emitted, the corresponding detection range for these waveforms is limited to within our galaxy even in the era of third-generation detectors. The corresponding event rate is two per century. We find from the waveforms that to detect core-collapse supernovae with an event rate of one per year, the gravitational-wave detectors need a strain sensitivity of 3$\times10^{-27}~$…
Gravitational-wave sources offer us unique testbeds for probing strong-field, dynamical and nonlinear aspects of gravity. In this chapter, we give a brief overview of the current status and future prospects of testing General Relativity with gravitational waves. In particular, we focus on three theory-agnostic tests (parameterized tests, inspiral-merger-ringdown consistency tests, and gravitational-wave propagation tests) and explain how one can apply such tests to example modified theories of gravity. We conclude by giving some open questions that need to be resolved to carry out more accurat…
Future ground-based gravitational-wave detectors are slated to detect black hole and neutron star collisions from the entire stellar history of the universe. To achieve the designed detector sensitivities, frequency noise from the laser source must be reduced below the level achieved in current Advanced LIGO detectors. This paper reviews the laser frequency noise suppression scheme in Advanced LIGO, and quantifies the noise coupling to the gravitational-wave readout. The laser frequency noise incident on the current Advanced LIGO detectors is $8 \times 10^{-5}~\mathrm{Hz/\sqrt{Hz}}$ at $1~\mat…
The Omicron software is a tool developed to perform a multi-resolution time-frequency analysis of data from gravitational-wave detectors: the LIGO, Virgo, and KAGRA detectors. Omicron generates spectrograms from whitened data streams, offering a visual representation of transient detector noises and gravitational-wave events. In addition, these events can be parameterized with an optimized resolution. They can be written to disk to conduct offline noise characterization and gravitational-wave event validation studies. Omicron is optimized to process, in parallel, thousands of data streams reco…
In this paper, we investigate the sensitivity to additional gravitational wave polarization modes of future detectors. We first look at the upcoming Einstein Telescope and its combination with existing or planned Earth-based detectors in the case of a stochastic gravitational wave background. We then study its correlation with a possible future space-borne detector sensitive to high-frequencies, like DECIGO. Finally, we adapt those results for a single GW source and establish the sensitivity of the modes, as well as the localization on the sky.
Time-delay interferometry is put forward to improve the signal-to-noise ratio of space-borne gravitational wave detectors by canceling the large laser phase noise with different combinations of measured data. Based on the Michelson data combination, the sensitivity function of the detector can be obtained by averaging the all-sky wave source positions. At present, there are two main methods to encode gravitational wave signal into detector. One is to adapt gravitational wave polarization angle depending on the arm orientation in the gravitational wave frame, and the other is to divide the grav…
Geometry of transient gravitational waves and estimation of efficiencies of different detector configurations
Facultad de Matemática Astronomía, Física y Computación (FaMAF)（数学、天文学、物理与计算学院）；Universidad Nacional de Córdoba（科尔多瓦国立大学）；Instituto de Física Enrique Gaviola (IFEG)（恩里克·加维亚拉物理研究所）
The various materials of test masses, and the difference of arm lengths of global ground-based gravitational-wave interferometer detectors offer a unique approach to test Newton's second law, weak equivalence principle, and Einstein equivalence principle with dynamical space-time effects in terms of the interaction of gravitational waves with detectors. We proposed a novel test strategy for the interaction between gravitational waves and detectors, which is independent of particular gravitation theory. A new population level of the Fisher-Matrix approach for multiple sources and multiple detec…
We present a new method, based on fractal analysis, to characterize the output of a physical detector that is in the form of a set of real-valued, discrete physical measurements. We apply the method to gravitational-wave data from the latest observing run of the Laser Interferometer Gravitational-wave Observatory. We show that a measure of the fractal dimension of the main detector output (strain channel) can be used to determine the instrument status, test data stationarity, and identify non-astrophysical excess noise in low latency. When applied to instrument control and environmental data (…
We develop a formalism to calculate the response of a model gravitational wave detector to a quantized gravitational field. Coupling a detector to a quantum field induces stochastic fluctuations ("noise") in the length of the detector arm. The statistical properties of this noise depend on the choice of quantum state of the gravitational field. We characterize the noise for vacuum, coherent, thermal, and squeezed states. For coherent states, corresponding to classical gravitational configurations, we find that the effect of gravitational field quantization is small. However, the standard devia…
In order to detect high frequency gravitational waves, we need a new detection method. In this paper, we develop a formalism for a gravitational wave detector using magnons in a cavity. Using Fermi normal coordinates and taking the non-relativistic limit, we obtain a Hamiltonian for magnons in gravitational wave backgrounds. Given the Hamiltonian, we show how to use the magnons for detecting high frequency gravitational waves. Furthermore, as a demonstration of the magnon gravitational wave detector, we give upper limits on GHz gravitational waves by utilizing known results of magnon experimen…
