arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1709.04117physics.ins-det
收藏

高温高压液态Pb-16 Li诊断技术的发展

Development of Diagnostics for High-Temperature High-Pressure Liquid Pb-16Li Applications

Abhishek Saraswat, Srikanta Sahu, T. Srinivas Rao, Ashok K. Prajapati, Shrikant Verma, Sandeep Gupta, Mritunjay Kumar, Rajendraprasad Bhattacharyay, Partha Das

摘要:

液态铅-锂(Pb-16 Li)作为与聚变发电厂相关的液态金属包层概念中的氚增殖剂、中子倍增器和冷却剂流体的候选材料之一受到主要关注。为了有效和可靠地操作这种高温液态金属系统,关键工艺参数的监测和控制是必不可少的。然而,有限的操作经验加上高温操作条件和Pb-16 Li的腐蚀性严重限制了商业上可获得的诊断工具的应用。本文阐述了本土校准测试设备的设计和实验方法,用于开发非接触式配置液位诊断使用脉冲雷达液位传感器,湿配置压力诊断使用隔膜密封型压力传感器和散装温度诊断与高温,高压液体铅和铅-16锂应用的温度分布。在380 C-400 C的温度和高达1 MPa(g)的压力下,使用分析方法对这些传感器进行校准检查。传感器在液态铅和液态Pb-16 Li环境中的长期测试超过1000小时,实现了可靠性和性能验证。在整个测试期间,雷达液位传感器的估计偏差在[-3.36 mm,+13.64 mm]范围内,压力传感器的估计误差在校准跨度的1.1%范围内。本文介绍了这些测试获得的结果和关键观察结果。

英文摘要:

Liquid lead-lithium (Pb-16Li) is of primary interest as one of the candidate materials for tritium breeder, neutron multiplier and coolant fluid in liquid metal blanket concepts relevant to fusion power plants. For an effective and reliable operation of such high temperature liquid metal systems, monitoring and control of critical process parameters is essential. However, limited operational experience coupled with high temperature operating conditions and corrosive nature of Pb-16Li severely limits application of commercially available diagnostic tools. This paper illustrates indigenous calibration test facility designs and experimental methods used to develop non-contact configuration level diagnostics using pulse radar level sensor, wetted configuration pressure diagnostics using diaphragm seal type pressure sensor and bulk temperature diagnostics with temperature profiling for high temperature, high pressure liquid Pb and Pb-16Li applications. Calibration check of these sensors was performed using analytical methods, at temperature between 380C-400C and pressure upto 1 MPa (g). Reliability and performance validation were achieved through long duration testing of sensors in liquid Pb and liquid Pb-16Li environment for over 1000 hour. Estimated deviation for radar level sensor lies within [-3.36 mm, +13.64 mm] and the estimated error for pressure sensor lies within 1.1% of calibrated span over the entire test duration. Results obtained and critical observations from these tests are presented in this paper.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑