用于μ子自旋旋转/弛豫实验的低本底活塞-圆柱型混合高压池
A low-background piston-cylinder type hybrid high pressure cell for muon-spin rotation/relaxation experiments
摘要:
一个低背景双壁活塞缸型压力池是在保罗谢勒研究所开发的。该单元由BERLYCO-25(铍铜)和MP35 N铍合金制成,其设计和尺寸专门适用于μ子自旋旋转/弛豫(muSR)测量。使用有限元分析(FEA)的压力传感器的机械设计和性能进行评估。通过将测量的材料应力-应变特性纳入有限元模型,优化单元尺寸,以达到最高可能的压力,同时保持较大的样品空间(直径6 mm,高12 mm)。所提出的非传统设计的双壁活塞缸压力单元具有较硬的外部MP35 N套筒和较软的内部CuBe缸,能够在环境温度下达到高达2.6 GPa的压力,对应于低温下的2.2 GPa,而不会对压力单元造成任何不可逆的损坏。μ子停止分布的性质,主要是在样品中,并在CuBe圆柱体,在低背景muSR信号的结果。
英文摘要:
A low background double-wall piston-cylinder-type pressure cell is developed at the Paul Scherrer Institute. The cell is made from BERLYCO-25 (beryllium copper) and MP35N nonmagnetic alloys with the design and dimensions which are specifically adapted to muon-spin rotation/relaxation (muSR) measurements. The mechanical design and performance of the pressure cell are evaluated using finite-element analysis (FEA). By including the measured stress-strain characteristics of the material into the finite-element model, the cell dimensions are optimized with the aim to reach the highest possible pressure while maintaining the sample space large (6 mm in diameter and 12 mm high). The presented unconventional design of the double-wall piston-cylinder pressure cell with a harder outer MP35N sleeve and asofter inner CuBe cylinder enables pressures of up to 2.6 GPa to be reached at ambient temperatures, corresponding to 2.2 GPa at low temperatures without any irreversible damage to the pressure cell. The nature of the muon stopping distribution, mainly in the sample and in the CuBe cylinder, results in a low-background muSR signal.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。