Herein, we elucidate the impact of tubular confinement on the structure and relaxation behaviour of poly(vinylidene difluoride) (PVDF) and how these affect the para-/ferroelectric behavior of this polymer. We use PVDF nanotubes that were solidified in anodic aluminum oxide (AAO) templates. Dielectric spectroscopy measurements evidence a bimodal relaxation process for PVDF nanotubes: besides the bulk-like -relaxation, we detect a notably slower relaxation that is associated with the PVDF regions of restricted dynamics at the interface with the AAO pore. Strickingly, both the bulk-like and the interfacial relaxation tend to become temperature independent as the temperature increases - a behavior that has been observed before in inorganic relaxor ferroelectrics. In line with this, we observe that the real part of the dielectric permittivity of the PVDF nanotubes exhibits a broad maximum when plotted against the temperature, which is, again, a typical feature of relaxor ferroelectrics. As such, we propose that in nanotubular PVDF, ferroelectric-like nanodomains are formed in the amorphous phase regions adjacent to the AAO interface. These ferroelectric nanodomains may result from an anisotropic chain conformation and a preferred orientation of local dipoles due to selective H-bond formation between the PVDF macromolecues and the AAO walls. Such relaxor-ferroelectric-like behaviour has not been observed for non-irradiated PVDF homopolymer; our findings thus may enable in the future alternative applications for this bulk commodity plastic, e.g., for the production of electrocaloric devices for solid-state refrigeration which benefit from a relaxor-ferroelectric-like response.
The relationship between elastic fatigue and electrical cyclic loading in alpha-phase poly(vinylidene fluoride) films has been investigated. Our experimental studies have shown that the electric-field-induced fatigue behavior can be described by a stress relaxation, which belongs to the Kohlrausch function group, and the corresponding exponent is a modified two-parameter Weibull distribution function.
A density-functional study of the alternatively-deflected zigzag structure for the beta-phase of poly(vinylidene fluoride) or (-CH2-CF2-)n is presented. Structure, polarization and effective charges have been determined. Using lattice constants and atomic positions transformed from experiment, the space group for the alternatively-deflected zigzag structure was found to be Cc2m (C2v 16), in agreement with previous studies. We find a polarization for the alternatively-deflected structure identical to that of the planar-zigzag structure with small changes in the accompanying effective charges.
The structures and electronic states in all polymorphs of poly(vinylidene fluoride) (PVDF) were calculated in various levels using the CRYSTAL software. The calculated lattice constants with PBE0/cc-pVTZ agreed well with experimental values. The molecular structure of PVDF was clarified. Derived electronic and phonon dispersions correspond closely with the experimental valence X-ray photoelectron and infrared (IR)/Raman spectra, respectively. The amount of spontaneous polarization in polar crystal forms was determined and the effect of long-range Coulomb interactions were discussed. The calcul…
The Poly(vinylidene fluoride)/CaCu3Ti4O12 (CCTO) nanocrystal composite films (85nm) with relatively high dielectric permittivity (90 at 100Hz) were prepared by the solution casting followed by spin coating technique. The structural, the microstructural and the dielectric properties of the composites were studied using X-ray diffraction, Scanning Electron Microscope, and Impedance analyzer respectively. The effective dielectric permittivity of the composite increased with increase in the volume fraction of CCTO at all the frequencies (100 Hz to 1MHz) under investigation. The room temperature di…
We present the computation of structural and polarization for a ferroelectric polymer, specifically, the beta-phase of poly(vinylidene fluoride) or (-CH$_2$-CF$_2$-)$_n$. Two structures have been described in the literature: one containing an undistorted carbon backbone (planar-zigzag) and the other containing alternatively deflected -CF$_2$- groups. Previous studies have indicated that these deflections have no significant effect on calculated elastic properties. We employ density functional theory within the generalized gradient approximation to find relaxed atomic positions for the planar-z…
Two structures have been proposed in the literature for the b-phase of the ferroelectric polymer, poly(vinylidene fluoride) (b-PVDF); planar-zigzag and alternatively-deflected forms. Using density-functional theory, we have found the planar-zigzag structure is the preferred form and upon atomic relaxation, the alternatively-deflected structure attains a structure very similar to the planar-zigzag structure. In order to better understand the atomic origin of the ferroelectricity in b-PVDF, we have for the first time determined the dynamic Born effective charges (Z*) for the planar-zigzag struct…
Phonon engineering focuses on heat transport modulation on atomic-scale. Different from reported methods, it is shown that electric field can also modulate heat transport in ferroelectric polymers, poly(vinylidene fluoride), by both simulation and measurement. Interestingly, thermal conductivities of poly(vinylidene fluoride) array can be enhanced by a factor of 3.25 along the polarization direction by simulation. The semi-crystalline poly(vinylidene fluoride) film can be also enhanced by a factor of 1.5 which is found by both simulation and measurement. The morphology and phonon property anal…
The possibility of obtaining relatively high dielectric constant polymer-ceramic composite by incorporating the giant dielectric constant material, CaCu3Ti4O12 (CCTO) in a Poly(vinylidene fluoride) (PVDF) polymer matrix by melt mixing and hot pressing process was demonstrated. The structure, morphology and dielectric properties of the composites were characterized using X ray diffraction, Thermal analysis, Scanning Electron Microscope, and Impedance analyzer. The effective dielectric constant of the composite increased with increase in the volume fraction of CCTO at all the frequencies (100 Hz…
Nano-graphene /polymer composites can functionas pressure induced electro-switches, at concentrations around their conductivity percolation threshold. Close to the critical point, the pressure dependence of the electron tunneling through the polymer barrier separating nanon-graphenes results from thecompetition among shorteningof the tunneling length and the increase of the polymer's polarizability. Such switching behaviorwas recentlyobserved inpolyvinyl alcohol (PVA) loaded withnano-graphene platelets (NGPs). In this work, PVA is blended withh alpha-poly(vinylidene fluoride) (PVdF)and NGPs. C…
In literature it has been reported that the gamma-phase PVDF film is formed from dimethyl sulfoxide (DMSO) solvents regardless of preparation temperature. In this report the crystallization of both alpha and gamma phase from DMSO solvent by varying preparation temperature has been described. This paper also describes the conversion of gamma-phase to beta- phase and alpha-phase at different annealing condition. When thin films were annealed at 90C for 5 hours, then maximum beta-phase content (greater than 95%) is present in PVDF thin film. The PVDF films completely converted to alpha-phase, whe…
Semi-empirical quantum chemistry methods offer a very interesting compromise between accuracy and computational load. In order to assess the performance of NDDO methods in the interpretation of terahertz spectra, the low frequency vibration modes of three crystalline materials, namely, polyethylene, poly(vinylidene fluoride) form II and $α$-D-glucose have been studied using the PM6 and PM7 Hamiltonians and the results have been compared with the experimental data and former calculations. The results show good qualitative or semi-quantitative agreement with the experimentally observed terahertz…
For pyroelectric detector application materials should have low dielectric constant, high pyroelectric coefficient, large non volatile polarization at small applied electric field and low specific heat. Large field (greater than 1200kV/cm) is need to pole ferroelectric polymer poly (vinylidene fluoride) (PVDF) and it has low sensitivity compared to other pyroelectric materials. To increase non volatile polarization at low poling field and to increase pyroelectric coefficient, LiTaO3 (LT) nano particles were added to PVDF matrix to make LT/PVDF composite. It is important to study the dielectric…
For pyroelectric sensor application, materials having large ferroelectric polarization at low applied field and high pyroelectric sensitivity are required. PVDF is one of the ferroelectric polymers, which is being used for pyroelectric detector application. Following properties of PVDF such as low density, low acoustic impedance, wide bandwidth, flexibility, toughness, and ease of fabrication into complex patterns and arrays make it suitable for large area detector applications. But the PVDF has low value of pyroelectric coefficient (p). High field (above 1200kV/cm) is required to pole the PVD…
Poly(vinylidene fluoride), PVDF nanofibers were prepared using electrospinning method and the influence of electrospinning parameters such as PVDF concentration, DMF:Acetone ratio on the formation of different phases (α, \b{eta}, and γ) and desired morphology were investigated. A detail analysis of X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectrometer data by deconvoluting the peaks were carried out for assigning and accurately identifying the peaks associated to a particular PVDF phase. SEM micrographs further helped in understanding the mechanism of desired \b{eta}-phase…
Polymer-piezoceramic 0-3 composites combine the flexibility of the polymers and the excellent piezoelectric properties of the ferroelectric based ceramic. While grain size of the ceramic powder is one of the important considerations in the fabrication of such composites, a correlation relating poling field induced structural changes and its possible influence on the overall piezoelectric response of the composite is still lacking. In this paper, we examine this issue on a 0-3 piezo-composite comprising of a ceramic powders of a low-lead piezoelectric alloy (x)Bi(Ni1/2Zr1/2O3-(1-x)PbTiO3 in pro…
We report on the fabrication of organic multiferroic tunnel junction (OMFTJ) based on an organic barrier of Poly(vinylidene fluoride) (PVDF):Fe3O4 nanocomposite. By adding Fe3O4 nanoparticles into the PVDF barrier, we found that the ferroelectric properties of the OMFTJ are considerably improved compared to that with pure PVDF barrier. It can lead to a tunneling electroresistance (TER) of about 450% at 10K and 100% at room temperature (RT), which is much higher than that of the pure PVDF based device (70% at 10K and 7% at RT). OMFTJs based on the PVDF:Fe3O4 nanocomposite could open new functio…
In the present work, the morphology and the electrical and thermal conduction properties of co-continuous poly(vinylidene fluoride) (PVDF), maleated polypropylene (PPgMA) and multiwall carbon nanotubes (CNT) nanostructured blends are investigated. CNT preferentially locates in the PPgMA phase and clearly causes a refinement in the co-continuous structure. Electrical conductivity experiments show that nanocomposites are well above the percolation threshold and evidence for one order of magnitude enhancement in conductivity for the co-continuous nanocomposites compared to the monophasic nanocomp…
