用于能够实现相干超导接触的原生$\text{AlO}_\text{x}$层的氩离子束铣削工艺
An argon ion beam milling process for native $\text{AlO}_\text{x}$ layers enabling coherent superconducting contacts
摘要:
提出了一种氩离子束铣削工艺,以去除铝薄膜上由于光刻步骤之间暴露于大气而形成的自然氧化层。我们的清洗过程很容易与传统的约瑟夫森结量子线路的制造相结合。从测量的内部品质因数的超导微波谐振器有和没有接触,我们放置在一个上界的离子束铣削接触的剩余电阻为50 $\,\mathrm{m}Ω\cdot μ\mathrm{m}^2$在4.5 GHz的频率。在低电场和高磁场的区域中,总覆盖区中仅$6\%$暴露于离子束铣削的谐振器在单光子状态下显示出高于$10^6$的品质因数,并且与单层样品相比没有劣化。我们相信这些结果将使越来越复杂的超导电路的发展量子信息处理。
英文摘要:
We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional fabrication of Josephson junction quantum circuits. From measurements of the internal quality factors of superconducting microwave resonators with and without contacts, we place an upper bound on the residual resistance of an ion beam milled contact of 50$\,\mathrm{m}Ω\cdot μ\mathrm{m}^2$ at a frequency of 4.5 GHz. Resonators for which only $6\%$ of the total foot-print was exposed to the ion beam milling, in areas of low electric and high magnetic field, showed quality factors above $10^6$ in the single photon regime, and no degradation compared to single layer samples. We believe these results will enable the development of increasingly complex superconducting circuits for quantum information processing.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。