甲醇和二甲醚二元混合物的高压自燃
High-Pressure Autoignition of Binary Blends of Methanol and Dimethyl Ether
摘要:
反应性控制压缩点火(RCCI)是一种新的先进发动机概念,其使用双燃料操作模式来实现燃料经济性和排放输出的显著改善。通常在该模式中使用的燃料包括不同比例的低反应性燃料和高反应性燃料以控制点火正时。因此,了解在自燃的二元燃料混合物的相互作用的影响是至关重要的,以优化这些RCCI发动机。在这项工作中,我们测量的二元混合物的二甲醚(C $_2$ H $_6$ O,DME)和甲醇(CH $_4$ O,MeOH)在快速压缩机的自燃延迟。在这些实验中,二甲醚和甲醇分别用作高反应性燃料和低反应性燃料。我们考虑了不同混合比(按摩尔计)的五种燃料混合物,包括100%DME-0%MeOH、75%DME-25%MeOH、0%DME-0%MeOH、25%DME-75%MeOH和0%DME-100%MeOH。实验在30巴的发动机相关压力下进行,用于化学计量当量比。此外,实验结果进行了比较与模拟使用的DME/MeOH燃烧的化学动力学模型合并独立的,验证良好的模型DME和MeOH。
英文摘要:
Reactivity Controlled Compression Ignition (RCCI) is a new advanced engine concept that uses a dual fuel mode of operation to achieve significant improvements in fuel economy and emissions output. The fuels that are typically used in this mode include a low- and a high-reactivity fuel in varying proportions to control ignition timing. As such, understanding the interaction effects during autoignition of binary fuel blends is critical to optimizing these RCCI engines. In this work, we measure the autoignition delays of binary blends of dimethyl ether (C$_2$H$_6$O, DME) and methanol (CH$_4$O, MeOH) in a rapid compression machine. In these experiments, dimethyl ether and methanol function as the high- and low-reactivity fuels, respectively. We considered five fuel blends at varying blending ratios (by mole), including 100% DME-0% MeOH, 75% DME-25% MeOH, 0% DME-0% MeOH, 25% DME-75% MeOH, and 0% DME-100% MeOH. Experiments are conducted at an engine-relevant pressure of 30 bar, for the stoichiometric equivalence ratio. In addition, the experimental results are compared with simulations using a chemical kinetic model for DME/MeOH combustion generated by merging independent, well-validated models for DME and MeOH.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。