arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1705.02869math.OC
收藏

用最优试验设计法估算木质纤维材料的透湿系数和对流系数

On the estimation of moisture permeability and advection coefficients of a wood fibre material using the optimal experiment design approach

Julien Berger, Thomas Busser, Denys Dutykh, Nathan Mendes

摘要:

本文介绍了最优试验设计(OED)的概念在多孔材料性能现场测量和识别方法中的实际应用。首先,提出了一种实验装置,并用于测量木纤维材料内的相对湿度,该木纤维材料经受相对湿度变化的单个和多个步骤。然后,OED的应用使得能够从20种可能的设计中规划出传感器定位和边界条件方面的实验条件。使用Fisher信息矩阵和参数的先验知识进行OED搜索。它确保提供识别方法的最佳精度,从而提供估计的参数。对于从相对湿度phi = 10到75%的单个步骤,已经发现了最优设计结果,其中一个传感器位于4和6 cm之间的位置X处,用于估计水分渗透系数,而对于从phi = 75%到phi = 33%的单个步骤,其中一个传感器位于X° = 3 cm处,用于估计平流系数。OED也被应用于参数对的识别。将传感器放置在X° = 5cm处,使样品经受多个相对湿度步骤(phi = 10-75-33-75%),发现其是用相同实验确定两种性质的最佳选择。这些OED参数,然后被用于测定水分渗透率和平流系数。估计的水分渗透系数是使用标准方法获得的先验值的两倍。平流参数对应于物质内部v = 0.01 mm/s量级的质量平均速度,对水分锋的模拟可能起重要作用。

英文摘要:

This paper presents a practical application of the concept of Optimal Experiment Design (OED) for the determination of properties of porous materials with in-situ measurements and an identification method. First, an experimental set-up was presented and used for the measurement of relative humidity within a wood fibre material submitted to single and multiple steps of relative humidity variation. Then, the application of OED enabled to plan the experimental conditions in terms of sensor positioning and boundary conditions out of 20 possible designs. The OED search was performed using the Fisher information matrix and a priori knowledge of the parameters. It ensures to provide the best accuracy of the identification method and thus the estimated parameter. Optimal design results have been found for single steps from the relative humidity phi = 10 to 75%, with one sensor located at the position X between 4 and 6 cm, for the estimation of moisture permeability coefficients, while from phi = 75% to phi = 33%, with one sensor located at X° = 3 cm, for the estimation of the advection coefficient. The OED has also been applied for the identification of couples of parameters. A sample submitted to multiple relative humidity steps (phi = 10-75-33-75%) with a sensor placed at X° = 5 cm was found as the best option for determining both properties with the same experiment. These OED parameters have then been used for the determination of moisture permeability and advection coefficients. The estimated moisture permeability coefficients are twice higher than the a priori values obtained using standard methods. The advection parameter corresponds to the mass average velocity of the order of v = 0.01 mm/s within the material and may play an important role on the simulation of moisture front.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑