用Maxwell解算器从GISAXS图重建层状光栅的详细线轮廓
Reconstructing Detailed Line Profiles of Lamellar Gratings from GISAXS Patterns with a Maxwell Solver
摘要:
利用掠入射小角X射线散射(GISAXS)技术,利用衍射图样重建了横向周期性纳米结构的表面形貌。为了模拟可见光散射,通过用有限元方法数值求解麦克斯韦方程组来精确计算近场和远场。由于入射波长和有限元尺寸之间的差异,这种技术在X射线中的应用仍然具有挑战性。由于入射角小,圆锥形散射几何形状和表面结构的周期性,GISAXS的这个缺点消失了,这允许以足够的数值精度严格计算衍射效率。为了开发基于GISAXS的尺寸计量工具,采用最先进的电子束光刻技术制作了线宽低至55 nm的层状光栅,然后将其蚀刻到硅中。GISAXS的高表面灵敏度与麦克斯韦解算器相结合,允许对厚的非均匀衬底进行光栅线形状的详细重建。重建的几何线形模型进行统计验证,通过应用马尔可夫链蒙特卡罗(MCMC)采样技术,这表明GISAXS是能够重建关键参数,如线的宽度与亚纳米的不确定性。
英文摘要:
Laterally periodic nanostructures were investigated with grazing incidence small angle X-ray scattering (GISAXS) by using the diffraction patterns to reconstruct the surface shape. To model visible light scattering, rigorous calculations of the near and far field by numerically solving Maxwell's equations with a finite-element method are well established. The application of this technique to X-rays is still challenging, due to the discrepancy between incident wavelength and finite-element size. This drawback vanishes for GISAXS due to the small angles of incidence, the conical scattering geometry and the periodicity of the surface structures, which allows a rigorous computation of the diffraction efficiencies with sufficient numerical precision. To develop dimensional metrology tools based on GISAXS, lamellar gratings with line widths down to 55 nm were produced by state-of-the-art e-beam lithography and then etched into silicon. The high surface sensitivity of GISAXS in conjunction with a Maxwell solver allows a detailed reconstruction of the grating line shape also for thick, non-homogeneous substrates. The reconstructed geometrical line shape models are statistically validated by applying a Markov chain Monte Carlo (MCMC) sampling technique which reveals that GISAXS is able to reconstruct critical parameters like the widths of the lines with sub-nm uncertainty.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。