Advanced Virgo输出模式清洁器腔长噪声上限
Upper-limit on the Advanced Virgo output mode cleaner cavity length noise
摘要:
先进的处女座探测器在其输出端口使用两个单片光学腔,以抑制用于引力波探测的载波光的高阶模和射频边带。这两个串联的腔形成输出模式清洁器。我们提出了一个测量的上限,这些腔的长度噪声是一致的热折射噪声预测$8 \times 10^{-16}\,\textrm{m/Hz}^{1/2}$在15 Hz。腔的长度使用Peltier单元和压电致动器来控制,以保持入射光的谐振。实现了$3.5 \times 10^{-13}\,\textrm{m}$的长度锁定精度。这两个结果相结合,以证明在10-60 Hz频带中的输出模式清洁器的宽带长度噪声是至少一个因素10低于其他预期的噪声源在先进的处女座探测器的设计配置。
英文摘要:
The Advanced Virgo detector uses two monolithic optical cavities at its output port to suppress higher order modes and radio frequency sidebands from the carrier light used for gravitational wave detection. These two cavities in series form the output mode cleaner. We present a measured upper limit on the length noise of these cavities that is consistent with the thermo-refractive noise prediction of $8 \times 10^{-16}\,\textrm{m/Hz}^{1/2}$ at 15 Hz. The cavity length is controlled using Peltier cells and piezo-electric actuators to maintain resonance on the incoming light. A length lock precision of $3.5 \times 10^{-13}\,\textrm{m}$ is achieved. These two results are combined to demonstrate that the broadband length noise of the output mode cleaner in the 10-60 Hz band is at least a factor 10 below other expected noise sources in the Advanced Virgo detector design configuration.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。