arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1701.02999physics.flu-dyncond-mat.soft
收藏

基于耦合DEM-SPH方法的湿塑料颗粒分离数值研究

Numerical study of wet plastic particle separation using a coupled DEM-SPH method

Darius Markauskas, Harald Kruggel-Emden, Viktor Scherer

摘要:

在废物回收的过程中,需要对不同种类的塑料颗粒进行分离。对于分离鼓,液体通过的过程是适用的。因此,分离是基于颗粒根据其密度在液体中下沉或漂浮的原理。在这项研究中,上述过程的数值分析聚对苯二甲酸乙二醇酯(PET)从聚丙烯(PP)颗粒的分离。离散元法与光滑粒子流体动力学方法(DEM-SPH)用于建模目的。就业的SPH的建模的液体让我们利用这种无网格方法的强大的一面,即,相对容易模拟大运动的流体与自由表面和移动边界。所使用的理论模型,并进行验证试验,其中溃坝问题被认为是一个例子。此后,对旋转滚筒中的塑料颗粒分离进行模拟。不同的操作和设计参数的影响,例如旋转速度、进给量、提升器的数量等,对塑料的最终纯度的影响。预计未来进行的分析将有助于优化滚筒分离工艺。

英文摘要:

The separation of different kind of plastic particles is required in the process of waste recycling. For the separation drum processes passed through by a liquid are applicable. Thereby the separation is based on the principle that particles either sink or float in a liquid depending on their densities. In this study the aforementioned process is numerically analysed for the separation of polyethylene terephthalate (PET) from polypropylene (PP) particles. The Discrete Element Method coupled with the Smoothed Particle Hydrodynamics method (DEM-SPH) is used for modelling purposes. The employment of the SPH for the modelling of the liquid let us exploit the strong side of this mesh-less method, namely, the relative easiness to model large movements of the fluid together with free surfaces and moving boundaries. The used theoretical model is presented and validation tests are performed, where a dam-break problem is considered as an example. Simulations of the plastic particle separation in the rotating drum are performed thereafter. The influence of the different operational and design parameters, such as the rotational velocity, the feed rate, the number of lifters etc., on the resultant purity of the plastic is estimated. It is expected that in the future the performed analysis will allow to optimise drum separation processes.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑