The manipulation of visible light is important in science and technology research. Metasurfaces can enable flexible and effective regulation of the phase, polarization, and propagation modes of an electromagnetic wave. Metasurfaces have become a research hotspot in optics and electromagnetics, and cross-polarization conversion is an important application for visible-light manipulation using a metasurface. A metasurface composed of nano-antenna arrays and bilayer plasma can reportedly convert the direction of linear polarized light efficiently. However, the metasurface of cross-polarization conversion operating in short-wavelength visible light is problematic. In addition, previous metasurfaces prepared using the top-down etching method is unsuitable for practical applications because of the necessary harsh experimental conditions and the high construction cost of preparation. In the present work, we suggest a dendritic cell-cluster metasurface achieve cross-polarization in transmission mode within 550, 570, 590 and 610 nm wavelength. Preparation is accomplished using a bottom-up electrochemical deposition method, which is easy and low cost. The dendritic cell-cluster metasurface is an important step in cross-polarization conversion research and has broad application prospects and development potential.
High-transmissivity all-dielectric metasurfaces have recently attracted attention towards the realization of ultra-compact optical devices and systems. Silicon based metasurfaces, in particular, are highly promising considering the possibility of monolithic integration with VLSI circuits. Realization of silicon based metasurfaces operational in the visible wavelengths remains a challenge. A numerical study of silicon metasurfaces based on stepped truncated cone shaped nanoantenna elements is presented. Metasurfaces based on the stepped conical geometry can be designed for operation in the 700n…
In the past few years, carpet cloaking attracted interests because of its feasibility at optical frequencies and potential in stealth technologies. Metasurfaces have been proposed as a method to engineer ultra-thin carpet cloaking surfaces due to their abilities to manipulate wavefronts, polarization, and phase at subwavelength scale. However, achieving broadband carpet cloaking with a significant bandwidth is one of the key remaining challenges for metasurface designs. To date, broadband carpet cloaking based on metasurfaces has not been achieved and cloaking is limited to discrete wavelength…
Metasurfaces are planar optical elements that hold promise for overcoming the limitations of refractive and conventional diffractive optics1-3. Dielectric metasurfaces demonstrated thus far4-10 are limited to transparency windows at infrared wavelengths because of significant optical absorption and loss at visible wavelengths. It is critical that new materials and fabrication techniques be developed for dielectric metasurfaces at visible wavelengths to enable applications such as three-dimensional displays, wearable optics and planar optical systems11. Here, we demonstrate high performance tit…
As two-dimensional metamaterials, metasurfaces open up new avenues for designing static planar optics. However, the dynamic modulation of metasurfaces in the optical band is required for practical applications. The existing dynamic devices rarely utilized the polarization manipulation capability of metasurfaces. Here, we demonstrate an electrically tunable multifunctional metasurface in the visible range by integrating birefringent liquid crystals (LCs) with all-dielectric metasurfaces based on a novel packaging scheme. By combining the helicity-dependent geometric phase of the metasurface and…
Recently, nonlinear hybrid metasurface comes into an attractive new concept in the research of nanophotonics and nanotechnology. It is composed of semiconductors with an intrinsically large nonlinear susceptibility and traditional plasmonic metasurfaces, offering opportunities for efficiently generating and manipulating nonlinear optical responses. A high second-harmonic generation (SHG) conversion efficiency has been demonstrated in the mid-infrared region by using multi-quantum-well (MQW) based plasmonic metasurfaces. However, it has yet to be demonstrated in the visible region. Here we pres…
Dyakonov surface wave existing at the interface with anisotropy offers a promising way of guiding light in two-dimension with almost no loss. However, predicted decades ago, the experimental demonstration of the Dyakonov surface wave seems always challenging for the weak anisotropic indices from the natural materials. Here we experimentally demonstrated a Dyakonov surface wave mode propagating in a hyperbolic metasurface at the visible frequency. Dyakonov surface waves at the two surfaces of the metasurface can be supported simultaneously by the hyperbolic anisotropy and form a Dyakonov typed …
Recently, an achromatic metasurface was successfully demonstrated to deflect light of multiple wavelengths in the same direction and it was further applied to the design of planar lenses without chromatic aberrations [Science, 347, 1342(2015)]. However, such metasurface can only work for normal incidence and exhibit low conversion efficiency. Here, we present an ultrawide-angle and high-efficiency metasurface without chromatic aberration for wavefront shaping in visible range. The metasurface is constructed by multiple metallic nano-groove gratings, which support enhanced diffractions for an u…
Dielectric metasurfaces require high refractive index contrast materials for optimum performance. This requirement imposes a severe restraint; devices have either been demonstrated at wavelengths of 700nm and above using high-index semiconductors such as silicon, or they use lower index dielectric materials such as TiO$_{2}$ or Si$_{3}$N$_{4}$ and operate in the visible wavelength regime. Here, we show that the high refractive index of silicon can be exploited at wavelengths as short as 532 nm by demonstrating a silicon metasurface with a transmission efficiency of 47% at this wavelength. The …
All-dielectric metasurfaces provide unique solutions for advanced wavefront manipulation of light with complete control of amplitude and phase at sub-wavelength scales. One limitation, however, for most of these devices is the lack of any post-fabrication tunability of their response. To break this limit, a promising approach is employing phase-change-materials (PCM), which provide a fast, low energy and non-volatile means to endow metasurfaces with a switching mechanism. In this regard, great advancements have been done in the mid infrared and near infrared spectrum using different chalcogeni…
Utilizing solar energy requires perfect absorption by photovoltaic cells for efficient conversion of solar energy into useful electrical energy. Metasurfaces can, not only be used to absorb solar energy efficiently but, they do so with thickness of structure in nano-scale -effectively reducing the size of the device. To achieve aforementioned feature metasurface absorbers are developed which give better absorbance on narrow/wide frequency spectrum. These absorbers are fashioned with variable structures employing variable materials but still, perfect absorbance is not attained with a simple two…
In nanoscale photonic devices, the demand for multifunctionality from metasurface 2D optics increases rapidly. To explore fine-tuning in the design metric, we reinvestigated the trapezoid shape copper metasurface with Finite-Difference Time-Domain simulation for efficiently using linearly polarized light for two different functionalities. From the plasmonic band structure, we see how the degree of asymmetry in geometry affects the efficient resonance coupling of the traveling plasmonic modes, along with different types of mode hybridization profiles related to the nanoantenna's geometric shape…
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible frequencies has been a significant challenge due to high plasmonic losses and difficulties in high-uniformity nanofabrication. Here, we propose a highly-efficient yet simple metasurface design comprising of single gradient antenna as unit cell. We demonstrate visible broadband (450 - 850 nm) anomalous reflection and spectrum splitting with 85% conversion effici…
Two key metrics for imaging systems are their magnification and optical bandwidth. While high-quality imaging systems today achieve bandwidths spanning the whole visible spectrum and large changes in magnification via optical zoom, these often entail lens assemblies with bulky elements unfit for size-constrained applications. Metalenses present a methodology for miniaturization but their strong chromatic aberrations and the lack of a varifocal achromatic element limit their utility. While exemplary broadband achromatic metalenses are realizable via dispersion engineering, in practice, these de…
All-dielectric optical metasurfaces with high quality (Q) factors have so far been hampered by the lack of simultaneously lossless and high refractive index (RI) materials over the full visible spectrum. To achieve broad spectral coverage, the use of low-index materials is, in fact, unavoidable due to the inverse correlation between the band-gap energy (and therefore the optical losses) and the RI. However, for Mie resonant photonics, smaller RIs are associated with reduced Q factors and mode volume confinement. In this work, we leverage symmetry-broken bound states in the continuum (BICs) to …
Engineering the dispersion of light in a metasurface allows for controlling the light-matter interaction strength between light confined in the metasurface and materials placed within its near-field. Specifically, engineering a flatband dispersion increases the photonic density of states thereby enhancing the light-matter interaction. Here, we experimentally demonstrate a metasurface with a flat dispersion at visible wavelengths. We designed and fabricated a suspended one-dimensional gallium phosphide metasurface and measured the photonic band structure via energy-momentum spectroscopy, observ…
Subwavelength dielectric resonators assembled into metasurfaces have become a versatile tool for miniaturising optical components approaching the nanoscale. An important class of metasurface functionalities is associated with asymmetry in both generation and transmission of light with respect to reversals of the positions of emitters and receivers. Nonlinear light-matter interaction in metasurfaces offers a promising pathway towards miniaturisation of the asymmetric control of light. Here we demonstrate asymmetric parametric generation of light in nonlinear metasurfaces. We assemble dissimilar…
Spatio-spectrally tailored multimode metasurface lasers in the visible range
Friedrich Schiller University（弗里德里希·席勒大学）；Fraunhofer-Institute of Applied Optics and Precision Engineering IOF（弗劳恩霍夫应用光学和精密工程研究所）；Max Planck School of Photonics（马克斯·普朗克光子学院）
Metasurfaces are ultrathin nanostructured surfaces that can allow arbitrary manipulation of light. Implementing dynamic tunability into their design could allow the optical functions of metasurfaces to be rapidly modified at will. The most pronounced and robust tunability of optical properties is provided by phase-change materials such as vanadium dioxide (VO2) and germanium antimony telluride (GST), but their implementations have been limited only to near-infrared wavelengths. Here, we demonstrate that VO2 nanoantennas with widely tunable Mie resonances can be utilized for designing tunable m…
Effective refractive index of disordered all-dielectric metasurfaces consisting of gallium phosphide (GaP) spheres is studied by means of three-dimensional finite-difference time-domain (FDTD) simulations at the wavelength of 532~nm. It is shown that a mixture of the high index nanoparticles with sizes close to the first magnetic and electric resonances randomly dispersed on metasurface may possess negative refraction. The dependence of the metasurface effective refractive index on the nanoparticle concentration and size is constructed. The feasibility of negative refraction at large concentra…
The optical elements comprised of sub-diffractive light scatterers, or metasurfaces, hold a promise to reduce the footprint and unfold new functionalities of optical devices. A particular interest is focused on metasurfaces for manipulation of phase and amplitude of light beams. Characterisation of metasurfaces can be performed using interferometry, which, however, may be cumbersome, specifically in the infrared (IR) range. Here, we realise a new method for characterising IR metasurfaces based on nonlinear interference, which uses accessible components for visible light. Correlated IR and visi…
Janus monolayers have long been captivated as a popular notion for breaking in-plane and out-of-plane structural symmetry. Originated from chemistry and materials science, the concept of Janus functions have been recently extended to ultrathin metasurfaces by arranging meta-atoms asymmetrically with respect to the propagation or polarization direction of the incident light. However, such metasurfaces are intrinsically static and the information they carry can be straightforwardly decrypted by scanning the incident light directions and polarization states once the devices are fabricated. In thi…
The index of refraction governs the flow of light through materials. At visible and near infrared wavelengths the real part of the refractive index is limited to less than 3 for naturally occurring transparent materials, fundamentally restricting applications. Here, we carried out experiments to study the upper limit of the effective refractive index of self-assembled metasurfaces at visible and near-infrared wavelengths. The centimeter-scale metasurfaces were made of a hexagonally close packed (hcp) monolayer of gold nanospheres coated with tunable alkanethiol ligand shells, controlling the i…
Nanostructured metasurfaces offer unique capabilities for local control of the phase and amplitude of transmitted and reflected optical waves. Based on this potential, a large number of metasurfaces have been proposed in recent years as alternatives to standard optical elements. In most cases, however, these elements suffer from large chromatic aberrations, thus limiting their usefulness for multi-wavelength or broadband applications. Here, in order to alleviate and correct the chromatic aberrations of individual diffractive elements, we introduce dense vertical stacking of independent metasur…
Light can be used for wireless information transmission apart from illumination; that is the key idea behind visible-light communication (VLC), one of the disruptive technologies of our days. It combines remarkably high data rates due to ultrashort wavelengths with huge reliability and security due to small distances; nevertheless, it substantially suffers from interference of neighboring light sources in multiple-link configurations. In this manuscript, we investigate a pair of light emitting diodes (LEDs) interfering each other and propose a simple nanoslit metasurface that radically increas…
Replacing electrons with photons is a compelling route towards light-speed, highly parallel, and low-power artificial intelligence computing. Recently, all-optical diffractive neural deep neural networks have been demonstrated. However, the existing architectures often comprise bulky components and, most critically, they cannot mimic the human brain for multitasking. Here, we demonstrate a multi-skilled diffractive neural network based on a metasurface device, which can perform on-chip multi-channel sensing and multitasking at the speed of light in the visible. The metasurface is integrated wi…
All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront shaping. However, lack of post-fabrication tunability has limited the true potential of metasurfaces for many applications. Here, we utilize a thin liquid crystal (LC) layer as a tunable medium surrounding the metasurface to achieve a phase-only spatial light modulator (SLM) with high reflection in the visible frequency, exhibiting an active and continuous resonance tuning with associated 2pi phase control and uncoupled amplitude. Dynamic wavefront shaping is …
Reconstruction of light profiles with amplitude and phase information, called holography, is an attractive optical technique to display three-dimensional images. Due to essential requirements for an ideal hologram, subwavelength control of both amplitude and phase is crucial. Nevertheless, traditional holographic devices have suffered from their limited capabilities of incomplete modulation in both amplitude and phase of visible light. Here, we propose a novel metasurface that is capable of completely controlling both amplitude and phase profiles of visible light independently with subwaveleng…
Metasurface holography, the reconstruction of holographic images by modulating the spatial amplitude and phase of light using metasurfaces, has emerged as a next-generation display technology. However, conventional fabrication techniques used to realize metaholograms are limited by their small patterning areas, high manufacturing costs, and low throughput, which hinder their practical use. Herein, we demonstrate a high efficiency hologram using a one-step nanomanufacturing method with a titanium dioxide nanoparticle-embedded-resin, allowing for high-throughput and low-cost fabrication. At a si…
Metalenses, which exhibit superior light-modulating performance with sub-micrometer-scale thicknesses, are suitable alternatives to conventional bulky refractive lenses. However, fabrication limitations, such as a high cost, low throughput, and small patterning area, hinder their mass production. Here, we demonstrate the mass production of low-cost, high-throughput, and large-aperture visible metalenses using an argon fluoride immersion scanner and wafer-scale nanoimprint lithography. Once a 12-inch master stamp is imprinted, hundreds of centimeter-scale metalenses can be fabricated. To enhanc…
Design of a conventional zoom lens is always challengeable because it requires not only sophisticated optical design strategy, but also complex and precise mechanical structures for lens adjustment. In this paper, we propose a continuous zoom lens consisting of two chiral geometric metasurfaces with dielectric nanobrick arrays sitting on a transparent substrate. The metalens can continuously vary the focal length by rotating either of the two metasurfaces along its optical axis without changing any other conditions. More importantly, because of the polarization dependence of the geometric meta…
Printing technology based on plasmonic structures has many advantages over pigment based color printing such as high resolution, ultra-compact size and low power consumption. However, due to high losses and broad resonance behavior of metals in the visible spectrum, it becomes challenging to produce well-defined colors. Here, we investigate cross-shaped dielectric nanoresonators which enable high quality resonance in the visible spectral regime and, hence, high quality colors. We numerically predict and experimentally demonstrate that the proposed all-dielectric nanostructures exhibit high qua…
Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio titanium dioxide metasurfaces can be fabricated and designed as meta-lenses with NA = 0.8. Diffraction-limited focusing is demonstrated at wavelengths of 405 nm, 532 nm, and 660 nm with corresponding efficiencies of 86%, 73%, and 66%. The meta-lenses can resolve nanoscale features separated by sub-wavelength distances and provide magnification as high as 170x…
We introduce chip-integrated visible light communication-band modulators based on niobium (Nb) metallic plasmonic nano-antenna arrays. Our plasmonic nano-devices provide strong sensitivity to the polarization of the incident visible light and the geometrical parameters of their subwavelength nanoscale building blocks. Moreover, they offer optical modulation properties with modulation depth MD = 60% at resonant wavelength lambda= 716 nm, at room temperature. By engineering the photo response of the Nb nano-device arrays, we observe a maximum extinction A(lambda)= 1- R(lambda}) = 95 % at resonan…
Metasurfaces have the potential to miniaturize and improve the performance of any optical element, with applications spanning telecommunications, computing and wearable optics. However, the ability to retain functionality over a continuous, broad range of wavelengths is essential for their widespread adoption. So far, efforts to achieve this have been limited to either a reflection configuration or operation at wavelengths other than the visible. Here, we show that by judicious choice of nanostructures, one can independently control both the phase and group delay, leading to broadband transmis…
Hologram is an ideal method for naked eye three-dimensional (3D) display, and computer-generated holography (CGH) makes it possible to reconstruct virtual objects. However, the large pixel size of common CGH devices results in shortages in the applications of hologram, such as narrow field of view, twin images, multi-diffraction orders, et al. Meanwhile, metasurfaces consisted of subwavelength structures show great potential in controlling of light which is suitable for hologram design. There are many inspired works to achieve dynamic meta-hologram as we summary in this paper. And it can be co…
We demonstrate a broadband, polarization independent, omnidirectional absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low emissivity at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- an…
Artificial metasurfaces are capable of completely manipulating the phase, amplitude, and polarization of light with high spatial resolutions. The emerging design based on high-index and low-loss dielectrics has led to the realization of novel metasurfaces with high transmissions, but these devices usually operate at the limited bandwidth, and are sensitive to the incident polarization. Here, for the first time we report experimentally the polarization-independent and high-efficiency dielectric metasurfaces spanning the visible wavelengths about 200 nm, which are of importance for novel flat op…
Phase, polarization, amplitude and frequency represent the basic dimensions of light, playing crucial roles for both fundamental light-mater interactions and all major optical applications. Metasurface emerges as a compact platform to manipulate these knobs, but previous metasurfaces have limited flexibility to simultaneous control them. Here, we introduce a multi-freedom metasurface that can simultaneously and independently modulate phase, polarization and amplitude in an analytical form, and further realize frequency multiplexing by a k-space engineering technique. The multi-freedom metasurf…
Metasurfaces hold great potentials for advanced holographic display with extraordinary information capacity and pixel sizes in an ultrathin flat profile. Dual-polarization channel to encode two independent phase profiles or spatially multiplexed meta-holography by interleaved metasurfaces are captivated popular solutions to projecting multiplexed and vectorial images. However, the intrinsic limit of orthogonal polarization-channels, their crosstalk due to coupling between meta-atoms, and interleaving-induced degradation of efficiency and reconstructed image quality set great barriers for sophi…
Information encryption and security is a prerequisite for information technology which can be realized by optical metasurface owing to its arbitrary manipulation over the wavelength, polarization, phase and amplitude of light. So far information encoding can be implemented by the metasurface in one dimensional (1D) mode (either wavelength or polarization) only with several combinations of independent channels. Here we successfully apply dielectric metasurfaces in a 2D mode (both wavelength and polarization) with far more combinations of independent channels to encrypt information, which theref…
