Optical orbital angular momentum (OAM) provides an additional dimension for photons to carry information in high-capacity optical communication. Although the practical needs have intrigued the generations of miniaturized devices to manipulate the OAM modes in various integrated platforms, the on-chip OAM detection is still challenging to match the newly-developed compact OAM emitter and OAM transmission fiber. Here, we demonstrate an ultra-compact device, i.e., a single plasmonic nanohole, to efficiently measure an optical beam's OAM state in a nondestructive way. The device size is reduced down to a few hundreds of nanometers, which can be easily fabricated and installed in the current OAM devices. It is a flexible and robust way for in-situ OAM monitoring and detection in optical fiber networks and long-distance optical communication systems. With proper optimization of the nanohole parameters, this approach could be further extended to discriminate the OAM information multiplexed in multiple wavelengths and polarizations.
We demonstrate that unidirectional and backscattering immune propagation of terahertz optical waves can be achieved in a topological valley-Hall waveguide made of graphene nanohole plasmonic crystals. In order to gain deeper physical insights into these phenomena, the band diagram of graphene nanohole plamsonic crystals has been investigated and optimized. We found that a graphene plasmonic crystal with nanohole arrays belonging to the $C_{6v}$ symmetry group possesses gapless Dirac cones, which can be gapped out by introducing extra nanoholes such that the symmetry point group of the system i…
We have used a gold nanohole array to trap single polystyrene nanoparticles, with a mean diameter of 30 nm, into separated hot spots located at connecting nanoslot regions. A high trap stiffness of approximately 0.85 fN/(nmmW) at a low incident laser intensity of ~0.51 mW/um2 at 980 nm was obtained. The experimental results were compared to the simulated trapping force and a reasonable match was achieved. This plasmonic array is useful for lab-on-a-chip applications and has particular appeal for trapping multiple nanoparticles with predefined separations or arranged in patterns in order to stu…
Absorption induced transparency is an optical phenomenon that occurs in metallic arrays of nanoholes when materials featuring narrow lines in their absorption spectra are deposited on top of it. First reported in the visible range, using dye lasers as cover materials, it has been described as transmission peaks unexpectedly close to the absorption energies of the dye laser. In this work, amplification of light is demonstrated in the active regime of absorption induced transparency. Amplification of stimulated emission can be achieved when the dye laser behaves as a gain material. Intense illum…
Plasmonic nanoapertures generate strong field gradients enabling efficient optical trapping of nano-objects. However, because the infrared laser used for trapping is also partly absorbed into the metal leading to Joule heating, plasmonic nano-optical tweezers face the issue of local temperature increase. Here, we develop three independent methods based on molecular fluorescence to quantify the temperature increase induced by a 1064 nm trapping beam focused on single and double nanoholes milled in gold films. We show that the temperature in the nanohole can be increased by 10°C even at the mode…
Periodic arrays of air nanoholes in thin metal films that support surface plasmon resonances can provide an alternative approach for boosting the light-matter interactions at the nanoscale. Indeed, nanohole arrays have garnered great interest in recent years for their use in biosensing, light emission enhancement and spectroscopy. However, the large-scale use of nanohole arrays in emerging technology requires new low-cost fabrication techniques. Here, we demonstrate a simple technique to fabricate nanohole arrays and examine their photonic applications. In contrast to the complicated and most …
A simple yet effective achiral platform using elliptical nanoholes for chiroptical analysis is demonstrated. Under linearly polarized excitation, an elliptical nanohole in a thin gold film can generate a localized chiral optical field for chiroptical analysis and simultaneously serve as a near-field optical trap to capture dielectric and plasmonic nanospheres. In particular, the trapping potential is enantioselective for dielectric nanospheres, i.e., the hole traps or repels the dielectric nanoparticles depending on the sample chirality. For plasmonic nanospheres, the trapping potential well i…
Prospects of using metal hole arrays for the enhanced optical detection of molecular chirality in nanosize volumes are investigated. Light transmission through the holes filled with an optically active material is modeled and the activity enhancement by more than an order of magnitude is demonstrated. The spatial resolution of the chirality detection is shown to be of a few tens of nanometers. From comparing the effect in arrays of cylindrical holes and holes of complex chiral shape, it is concluded that the detection sensitivity is determined by the plasmonic near field enhancement. The intri…
Recently, nonlinear hybrid metasurface comes into an attractive new concept in the research of nanophotonics and nanotechnology. It is composed of semiconductors with an intrinsically large nonlinear susceptibility and traditional plasmonic metasurfaces, offering opportunities for efficiently generating and manipulating nonlinear optical responses. A high second-harmonic generation (SHG) conversion efficiency has been demonstrated in the mid-infrared region by using multi-quantum-well (MQW) based plasmonic metasurfaces. However, it has yet to be demonstrated in the visible region. Here we pres…
Plasmonic nano-optical tweezers enable the non-invasive manipulation of nano-objects under low illumination intensities, and have become a powerful tool for nanotechnology and biophysics. However, measuring the trap stiffness of nanotweezers remains a complicated task, which hinders the development of plasmonic trapping. Here, we describe an experimental method to measure the trap stiffness based on the temporal correlation of the fluorescence from the trapped object. The method is applied to characterize the trap stiffness in different double nanohole apertures and explore the influence of th…
Surface-enhanced Raman spectroscopy (SERS) sensing of DNA sequences by plasmonic nanopores could pave a way to new generation single-molecule sequencing platforms. The SERS discrimination of single DNA bases depends critically on the time that a DNA strand resides within the plasmonic hot spot. However, DNA molecules flow through the nanopores so rapidly that the SERS signals collected are not sufficient for single-molecule analysis. In this work, we report an approach to control the time that molecules reside in the hot spot by physically adsorbing them onto a gold nanoparticle and then trapp…
We show that broadband optical magnetism can be achieved through incorporating multi-scaled 3D metallic meta-elements into Z-shaped nanohole arrays. The broadband effect arises from the excitation of multiple magnetic resonances in the meta-elements at different wavelengths. Moreover, the nanohole arrays exhibit a large transmission difference for left- and right-handed circularly polarized incident light due to the chiral arrangement of the meta-elements. More importantly, we have realized experimentally the broadband behavior for the optical range in Ag nanohole arrays fabricated by using a …
Evanescent light can be localized at the nanoscale by resonant absorption in a plasmonic nanoparticle or taper or by transmission through a nanohole. However, a conventional lens cannot focus free-space light beyond half of the wavelength λ. Nevertheless, precisely tailored interference of multiple waves can form a hotspot in free space of arbitrarily small size known as superoscillation. Here, we report a new type of integrated metamaterial interferometry that allows for the first time mapping of fields with deep subwavelength resolution ~ λ/100. It reveals that electromagnetic field near the…
In this thesis various plasmonic materials, such as hyperbolic metamaterial nanohole arrays and Au-coated free standing nanoassembly supporting nanopores, are investigated with the aim to perform optical sensing of DNA molecules with Surface-Enhanced Raman Spectroscopy in flow-through configuration.
Surface plasmon polariton (SPP) as a bounded mode on a metal/dielectric interface intrinsically has a definite transverse magnetic (TM) polarization that usually lacks further manipulations. However, the in-plane longitudinal components of SPP field can produce versatile polarization states when two orthogonal propagating SPP interfere with each other. Here, we demonstrated a plasmonic polarization router by designing appropriate nanohole arrays that can selectively scatter the interfered SPP fields to desired light beams. It is well proved that our device is able to reconfigure a certain inpu…
Plasmonic lasers provide a paradigm-changing approach for the generation of coherent light at the nanoscale. In addition to the usual properties of coherent radiation, the emission of plasmonic lasers can feature high sensitivity to the surrounding environment, which makes this technology attractive for developing high-performance and highly-integrated sensing devices. Here, we investigate a plasmonic laser architecture based on a high-Q plasmonic crystal consisting of a periodic arrangement of nanoholes on a thin gold film cladded with an organic-dye-doped SiO$_2$ gain layer as the gain mater…
Plasmonic nano-tweezers use intense electric field gradients to generate optical forces able to trap nano-objects in liquids. However, part of the incident light is absorbed into the metal, and a supplementary thermophoretic force acting on the nano-object arises from the resulting temperature gradient. Plasmonic nano-tweezers thus face the challenge of disentangling the intricate contributions of the optical and thermophoretic forces. Here, we show that commonly added surfactants can unexpectedly impact the trap performance by acting on the thermophilic or thermophobic response of the nano-ob…
Conventional optical displays using ITO (indium tin oxide) and LC (liquid crystal) materials present a lot of challenges in terms of long-term sustainability. We show here how it is possible to generate a cost effective and CMOS compatible fast and full range electrically controlled RGB color display by combining transmission based plasmonic metasurfaces with MEMS (Microelectromechanical systems) technology, using only two common materials: Aluminum and silicon oxide. White light is filtered into red, green, and blue components by plasmonic metasurfaces made of aluminum nanohole arrays, and th…
Plasmonic materials and metamaterials have been widely utilized to achieve spectral transmission, reflection and absorption filters based on localized or delocalized resonances arising from the interaction of photons with nanostructured materials. Realization of visible-frequency, high-performance, large-area, optical filters based on nanoplasmonic materials is rather challenging due to nanofabrication related problems (cost, fabrication imperfection, surface roughness) and optical losses of metals. Here, we propose and demonstrate large-area perfect absorbers and transmission filters that ove…
Actively tunable, narrowband spectral filtering across arbitrary optical wavebands is highly desirable in a plethora of applications, from chemical sensing, hyperspectral imaging to infrared astronomy. Yet, the ability to actively reconfigure the optical properties of a solid-state narrowband filter remains elusive. Existing solutions require either moving parts, have slow response times or provide limited spectral coverage. Here, we demonstrate a continuously tunable, spectrally-agnostic, all-solid-state, narrowband phase-change metasurface filter based on a GeSbTe (GST)-embedded plasmonic na…
University of California, Los Angeles（加州大学洛杉矶分校）；California NanoSystems Institute (CNSI), University of California, Los Angeles（加州大学洛杉矶分校加州纳米系统研究所）
Conventional spectrometers are limited by trade-offs set by size, cost, signal-to-noise ratio (SNR), and spectral resolution. Here, we demonstrate a deep learning-based spectral reconstruction framework, using a compact and low-cost on-chip sensing scheme that is not constrained by the design trade-offs inherent to grating-based spectroscopy. The system employs a plasmonic spectral encoder chip containing 252 different tiles of nanohole arrays fabricated using a scalable and low-cost imprint lithography method, where each tile has a unique geometry and, thus, a unique optical transmission spec…
The functionalities of a wide range of optical and opto-electronic devices are based on resonance effects and active tuning of the amplitude and wavelength response is often essential. Plasmonic nanostructures are an efficient way to create optical resonances, a prominent example is the extraordinary optical transmission (EOT) through arrays of nanoholes patterned in a metallic film. Tuning of resonances by heating, applying electrical or optical signals has proven to be more elusive, due to the lack of materials that can induce modulation over a broad spectral range and/or at high speeds. Her…
