The data taken by the advanced LIGO and Virgo gravitational-wave detectors contains short duration noise transients that limit the significance of astrophysical detections and reduce the duty cycle of the instruments. As the advanced detectors are reaching sensitivity levels that allow for multiple detections of astrophysical gravitational-wave sources it is crucial to achieve a fast and accurate characterization of non-astrophysical transient noise shortly after it occurs in the detectors. Previously we presented three methods for the classification of transient noise sources. They are Principal Component Analysis for Transients (PCAT), Principal Component LALInference Burst (PC-LIB) and Wavelet Detection Filter with Machine Learning (WDF-ML). In this study we carry out the first performance tests of these algorithms on gravitational-wave data from the Advanced LIGO detectors. We use the data taken between the 3rd of June 2015 and the 14th of June 2015 during the 7th engineering run (ER7), and outline the improvements made to increase the performance and lower the latency of the algorithms on real data. This work provides an important test for understanding the performance of these methods on real, non stationary data in preparation for the second advanced gravitational-wave detector observation run, planned for later this year. We show that all methods can classify transients in non stationary data with a high level of accuracy and show the benefits of using multiple classifiers.
Data from the LIGO detectors typically contain many non-Gaussian noise transients which arise due to instrumental and environmental conditions. These non-Gaussian transients can be an issue for the modelled and unmodelled transient gravitational-wave searches, as they can mask or mimic a true signal. Data quality can change quite rapidly, making it imperative to track and find new sources of transient noise so that data are minimally contaminated. Several examples of transient noise and the tools used to track them are presented. These instances serve to highlight the diverse range of noise so…
In the field of gravitational-wave (GW) interferometers, the most severe limitation to the detection of transient signals from astrophysical sources comes from transient noise artefacts, known as glitches, that happens at a rate around $1$ per minute. Because glitches reduce the amount of scientific data available, there is a need for better modelling and inclusion of glitches in large-scale studies, such as stress testing the search pipelines and increasing the confidence of detection. In this work, we employ a Generative Adversarial Network (GAN) to produce a particular class of glitches ({\…
Calibration of the Advanced LIGO detectors is the quantification of the detectors' response to gravitational waves. Gravitational waves incident on the detectors cause phase shifts in the interferometer laser light which are read out as intensity fluctuations at the detector output. Understanding this detector response to gravitational waves is crucial to producing accurate and precise gravitational wave strain data. Estimates of binary black hole and neutron star parameters and tests of general relativity require well-calibrated data, as miscalibrations will lead to biased results. We describ…
We present an overview of the SkyMapper optical follow-up program for gravitational-wave event triggers from the LIGO/Virgo observatories, which aims at identifying early GW170817-like kilonovae out to $\sim 200$ Mpc distance. We describe our robotic facility for rapid transient follow-up, which can target most of the sky at $δ<+10°$ to a depth of $i_\mathrm{AB}\approx 20$ mag. We have implemented a new software pipeline to receive LIGO/Virgo alerts, schedule observations and examine the incoming real-time data stream for transient candidates. We adopt a real-bogus classifier using ensemble-ba…
Detection and classification of transients in data from gravitational wave detectors are crucial for efficient searches for true astrophysical events and identification of noise sources. We present a hybrid method for classification of short duration transients seen in gravitational wave data using both supervised and unsupervised machine learning techniques. To train the classifiers we use the relative wavelet energy and the corresponding entropy obtained by applying one-dimensional wavelet decomposition on the data. The prediction accuracy of the trained classifier on 9 simulated classes of …
On September 2015, a century after Einstein's predictions of their existence, the first gravitational waves (GWs) direct detection was performed by LIGO. On August 17, 2017, the two Advanced LIGO and the Advanced Virgo interferometers detected a GW produced by two merging neutron stars. The subsequent localization of the source in the sky, thanks to the presence of a third detector, led to the detection of the electromagnetic counterpart and follow-up of the event by roughly 70 electromagnetic and neutrino telescopes. After the first two data taking runs (O1 and O2), the LIGO-Virgo network det…
This paper presents an adaptable, parallelizable method for subtracting linearly coupled noise from Advanced LIGO data. We explain the features developed to ensure that the process is robust enough to handle the variability present in Advanced LIGO data. In this work, we target subtraction of noise due to beam jitter, detector calibration lines, and mains power lines. We demonstrate noise subtraction over the entirety of the second observing run, resulting in increases in sensitivity comparable to those reported in previous targeted efforts. Over the course of the second observing run, we see …
The LIGO and Virgo detectors are sensitive to a variety of noise sources, such as instrumental artifacts and environmental disturbances. The Stochastic Transient Analysis Multi-detector Pipeline (STAMP) has been developed to search for long-duration (t$\gtrsim$1s) gravitational-wave (GW) signals. This pipeline can also be used to identify environmental noise transients. Here we present an algorithm to determine when long-duration noise sources couple into the interferometers, as well as identify what these noise sources are. We analyze the cross-power between a GW strain channel and an environ…
On September 14, 2015, a gravitational wave signal from a coalescing black hole binary system was observed by the Advanced LIGO detectors. This paper describes the transient noise backgrounds used to determine the significance of the event (designated GW150914) and presents the results of investigations into potential correlated or uncorrelated sources of transient noise in the detectors around the time of the event. The detectors were operating nominally at the time of GW150914. We have ruled out environmental influences and non-Gaussian instrument noise at either LIGO detector as the cause o…
We describe the methods used to construct the aligned-spin template bank of gravitational waveforms used by the GstLAL-based inspiral pipeline to analyze data from the second observing run of Advanced LIGO and the first observing run of advanced Virgo. The bank expands upon the parameter space covered during the first observing run, including coverage for merging compact binary systems with total mass between 2 $\mathrm{M}_{\odot}$ and 400 $\mathrm{M}_{\odot}$ and mass ratios between 1 and 97.988. Thus the systems targeted include merging neutron star-neutron star systems, neutron star-black h…
We have developed, produced and characterised integrated sensors, actuators and the related read-out and drive electronics that will be used for the control of the Advanced LIGO suspensions. The overall system consists of the BOSEMs (displacement sensor with integrated electro-magnetic actuator), the satellite boxes (BOSEM readout and interface electronics) and six different types of coil-driver units. In this paper we present the design of this read-out and control system, we discuss the related performance relevant for the Advanced LIGO suspensions, and we report on the experimental activity…
The Advanced Laser Interferometer Gravitational-wave Observatory (LIGO) detectors have completed their initial upgrade phase and will enter the first observing run in late 2015, with detector sensitivity expected to improve in future runs. Through the combined efforts of on-site commissioners and the Detector Characterization group of the LIGO Scientific Collaboration, interferometer performance, in terms of data quality, at both LIGO observatories has vastly improved from the start of commissioning efforts to present. Advanced LIGO has already surpassed Enhanced LIGO in sensitivity, and the r…
The noise of gravitational-wave (GW) interferometers limits their sensitivity and impacts the data quality, hindering the detection of GW signals from astrophysical sources. For transient searches, the most problematic are transient noise artifacts, known as glitches, that happen at a rate around $ 1 \text{ min}^{-1}$, and can mimic GW signals. Because of this, there is a need for better modeling and inclusion of glitches in large-scale studies, such as stress testing the pipelines. In this proof-of concept work we employ Generative Adversarial Networks (GAN), a state-of-the-art Deep Learning …
Gravitational waves produced at kilohertz frequencies in the aftermath of a neutron star collision can shed light on the behavior of matter at extreme temperatures and densities that are inaccessible to laboratory experiments. Gravitational-wave interferometers are limited by quantum noise at these frequencies but can be tuned via their optical configuration to maximize the probability of post-merger signal detection. We compare two such tuning strategies to turn Advanced LIGO into a post-merger-focused instrument: first, a wideband tuning that enhances the instrument's signal-to-noise ratio 4…
The Advanced LIGO detectors are sophisticated opto-mechanical devices. At the core of their operation is feedback control. The Advanced LIGO project developed a custom digital control and data acquisition system to handle the unique needs of this new breed of astronomical detector. The advligorts is the software component of this system. This highly modular and extensible system has enabled the unprecedented performance of the LIGO instruments, and has been a vital component in the direct detection of gravitational waves.
Data from current gravitational wave detectors contains a high rate of transient noise (glitches) that can trigger false detections and obscure true astrophysical events. Existing noise-detection algorithms largely rely on model-based methods that may miss noise transients unwitnessed by auxiliary sensors or with exotic morphologies. We propose the Unicorn Multi-window Anomaly-detection Pipeline (UniMAP): a model-free algorithm to identify and characterize transient noise leveraging the Temporal Outlier Factor (TOF) via a multi-window data-resampling scheme. We show this windowing scheme exten…
The LIGO Scientific Collaboration (LSC) glitch group is part of the LIGO detector characterization effort. It consists of data analysts and detector experts who, during and after science runs, collaborate for a better understanding of noise transients in the detectors. Goals of the glitch group during the fifth LIGO science run (S5) included (1) offline assessment of the detector data quality, with focus on noise transients, (2) veto recommendations for astrophysical analysis and (3) feedback to the commissioning team on anomalies seen in gravitational wave and auxiliary data channels. Other a…
"Glitches" -- transient noise artifacts in the data collected by gravitational wave interferometers like LIGO and Virgo -- are an ever-present obstacle for the search and characterization of gravitational wave signals. With some having morphology similar to high mass, high mass-ratio, and extreme-spin binary black hole events, they limit sensitivity to such sources. They can also act as a contaminant for all sources, requiring targeted mitigation before astrophysical inferences can be made. We propose a data driven, parametric model for frequently encountered glitch types using probabilistic p…
Binary black holes are thought to form primarily via two channels: isolated evolution and dynamical formation. The component masses, spins, and eccentricity of a binary black hole system provide clues to its formation history. We focus on eccentricity, which can be a signature of dynamical formation. Employing the spin-aligned eccentric waveform model SEOBNRE, we perform Bayesian inference to measure the eccentricity of binary black hole merger events in the first Gravitational-Wave Transient Catalogue of LIGO and Virgo. We find that all of these events are consistent with zero eccentricity. W…
Rotating neutron stars can emit continuous gravitational waves, which have not yet been detected. We present a search for continuous gravitational waves from unknown neutron stars in binary systems with orbital period between 15 and 45 days. This is the first time that Advanced LIGO data and the recently developed BinarySkyHough pipeline have been used in a search of this kind. No detections are reported, and upper limits on the gravitational wave amplitude are calculated, which improve the previous results by a factor of 17.
As part of the Advanced LIGO+ (A+) project we have developed, produced, and characterised sensors and electronics to interrogate new optical suspensions. The central element is a displacement sensor with an integrated electromagnetic actuator known as a BOSEM and its readout and drive electronics required to integrate them into LIGO's control and data system. In this paper we report on improvements to the sensors and testing procedures undertaken to meet enhanced performance requirements set out by the A+ upgrade to the detectors. The best devices reach a noise level of $4.5\times 10^{-11}{\rm…
Quality improvement of interferometric data collected by gravitational-wave detectors such as Advanced LIGO and Virgo is mission critical for the success of gravitational-wave astrophysics. Gravitational-wave detectors are sensitive to a variety of disturbances of non-astrophysical origin with characteristic frequencies in the instrument band of sensitivity. Removing non-astrophysical artifacts that corrupt the data stream is crucial for increasing the number and statistical significance of gravitational-wave detections and enabling refined astrophysical interpretations of the data. Machine le…
The search for fast optical transients, such as the expected electromagnetic counterparts to binary neutron star mergers, is riddled with false positives ranging from asteroids to stellar flares. While moving objects are readily rejected via image pairs separated by $\sim$1 hr, stellar flares represent a challenging foreground that significantly outnumber rapidly-evolving explosions. Identifying stellar sources close to and fainter than the transient detection limit can eliminate these false positives. Here, we present a method to reliably identify stars in deep co-adds of Palomar Transient Fa…
Binary neutron star (NS) mergers are among the most promising astrophysical sources of gravitational wave emission for Advanced LIGO and Advanced Virgo, expected to be operational in 2015. Finding electromagnetic counterparts to these signals will be essential to placing them in an astronomical context. The Swift satellite carries a sensitive X-ray telescope (XRT), and can respond to target-of-opportunity requests within 1-2 hours, and so is uniquely poised to find the X-ray counterparts to LIGO/Virgo triggers. Assuming NS mergers are the progenitors of short gamma-ray bursts (GRBs), some perc…
The two interferometers of the Laser Interferometry Gravitaional-wave Observatory (LIGO) recently detected gravitational waves from the mergers of binary black hole systems. Accurate calibration of the output of these detectors was crucial for the observation of these events, and the extraction of parameters of the sources. The principal tools used to calibrate the responses of the second-generation (Advanced) LIGO detectors to gravitational waves are systems based on radiation pressure and referred to as Photon Calibrators. These systems, which were completely redesigned for Advanced LIGO, in…
The Laser Interferometer Gravitational wave Observatory (LIGO) and Virgo, advanced ground-based gravitational-wave detectors, will begin collecting science data in 2015. With first detections expected to follow, it is important to quantify how well generic gravitational-wave transients can be localized on the sky. This is crucial for correctly identifying electromagnetic counterparts as well as understanding gravitational-wave physics and source populations. We present a study of sky localization capabilities for two search and parameter estimation algorithms: \emph{coherent WaveBurst}, a cons…
We discuss the influence of Young's modulus temperature dependence on the number of parametrically unstable modes in a Fabry-Perot cavity of Advanced LIGO interferometer. Some unstable modes may be suppressed by changing the mirror's temperature due to temperature dependence of Young's modulus. Varying the temperature of the mirrors we can change their frequencies of the elastic modes; it, in turn, can change the number of unstable modes, leading to nonlinear effect of parametric oscillatory instability. The determination of the optimal values of the temperature variations for some elastic mod…
The Advanced LIGO gravitational wave detectors are second generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in initial LIGO, Fabry-Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recycling has been added in Advanced LIGO to improve the frequency response. In the most sensitive frequency regi…
Newtonian gravitational noise from seismic fields is predicted to be a limiting noise source at low frequency for second generation gravitational-wave detectors. Mitigation of this noise will be achieved by Wiener filtering using arrays of seismometers deployed in the vicinity of all test masses. In this work, we present optimized configurations of seismometer arrays using a variety of simplified models of the seismic field based on seismic observations at LIGO Hanford. The model that best fits the seismic measurements leads to noise reduction limited predominantly by seismometer self-noise. A…
In the coming years, the gravitational wave community will be optimizing detector performance for a variety of astrophysical sources that make competing demands on the detector sensitivity in different frequency bands. In this paper we describe a number of technologies that are being developed as anticipated upgrades to the Advanced LIGO detector, and quantify the potential sensitivity improvement they offer. Specifically, we consider squeezed light injection for reduction of quantum noise, detector design and materials changes which reduce thermal noise, and mirrors with significantly increas…
We introduce two novel time-dependent figures of merit for both online and offline optimizations of advanced gravitational-wave (GW) detector network operations with respect to (i) detecting continuous signals from known source locations and (ii) detecting GWs of neutron star binary coalescences from known local galaxies, which thereby have the highest potential for electromagnetic counterpart detection. For each of these scientific goals, we characterize an $N$-detector network, and all its $(N-1)$-detector subnetworks, to identify subnetworks and individual detectors (key contributors) that …
Following a major upgrade, the two advanced detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO) held their first observation run between September 2015 and January 2016. With a strain sensitivity of $10^{-23}/\sqrt{\mathrm{Hz}}$ at 100 Hz, the product of observable volume and measurement time exceeded that of all previous runs within the first 16 days of coincident observation. On September 14th, 2015 the Advanced LIGO detectors observed a transient gravitational-wave signal determined to be the coalescence of two black holes [Phys. Rev. Lett. 116, 061102 (2016)], launc…
Magnetars are neutron stars with exceptionally strong dipole magnetic fields which are observed to display a range of x-ray flaring behavior, but the flaring mechanism is not well understood. The third observing run of Advanced LIGO and Virgo extended from April 1, 2019 to March 27, 2020, and contained x-ray flares from known magnetar SGR 1935+2154, as well as the newly-discovered magnetar, Swift J1818-1607. We search for gravitational waves coincident with these magnetar flares with minimally modeled, coherent searches which specifically target both short-duration gravitational waves produced…
A global network of advanced gravitational wave interferometric detectors is under construction. These detectors will offer an order of magnitude improvement in sensitivity over the initial detectors and will usher in the era of gravitational wave astronomy. In this paper, we evaluate the benefits of relocating one of the advanced LIGO detectors to India.
The Advanced LIGO gravitational wave detectors are nearing their design sensitivity and should begin taking meaningful astrophysical data in the fall of 2015. These resonant optical interferometers will have unprecedented sensitivity to the strains caused by passing gravitational waves. The input optics play a significant part in allowing these devices to reach such sensitivities. Residing between the pre-stabilized laser and the main interferometer, the input optics is tasked with preparing the laser beam for interferometry at the sub-attometer level while operating at continuous wave input p…
This work describes a template-free method to search gravitational waves (GW) using data from the LIGO observatories simultaneously. The basic idea of this method is that a GW signal is present in a short-duration data segment if the maximum correlation-coefficient between the strain signals is higher than a significant threshold and its time difference is lower than the 10 ms of inter-observatory light propagation time. Hence, this method can be used to carry out blind searches of any types of GW irrespective of the waveform and of the source type and sky location. An independent search of in…
This paper presents a parameter estimation analysis of the seven binary black hole mergers---GW170104, GW170608, GW170729, GW170809, GW170814, GW170818, and GW170823---detected during the second observing run of the Advanced LIGO and Virgo observatories using the gravitational-wave open data. We describe the methodology for parameter estimation of compact binaries using gravitational-wave data, and we present the posterior distributions of the inferred astrophysical parameters. We release our samples of the posterior probability density function with tutorials on using and replicating our resu…
This is an overview of the adaptive optics used in Advanced LIGO (aLIGO), known as the thermal compensation system (TCS). The thermal compensation system was designed to minimize thermally-induced spatial distortions in the interferometer optical modes and to provide some correction for static curvature errors in the core optics of aLIGO. The TCS is comprised of ring heater actuators, spatially tunable CO$_{2}$ laser projectors and Hartmann wavefront sensors. The system meets the requirements of correcting for nominal distortion in Advanced LIGO to a maximum residual error of 5.4nm, weighted a…
Results are presented from a semicoherent search for continuous gravitational waves from a nearby neutron star candidate, Fomalhaut b, using data collected in the second observing run of Advanced LIGO. The search is based on a hidden Markov model scheme, capable of tracking signal frequency evolution from the star's secular spin down and stochastic timing noise simultaneously. The scheme is combined with a frequency domain matched filter ($\mathcal{F}$-statistic), calculated coherently over five-day time stretches. The frequency band 100-1000 Hz is searched. After passing the above-threshold c…
Parametric instabilities have long been studied as a potentially limiting effect in high-power interferometric gravitational wave detectors. Until now, however, these instabilities have never been observed in a kilometer-scale interferometer. In this work we describe the first observation of parametric instability in an Advanced LIGO detector, and the means by which it has been removed as a barrier to progress.
Understanding the noise in gravitational-wave detectors is central to detecting and interpreting gravitational-wave signals. Glitches are transient, non-Gaussian noise features that can have a range of environmental and instrumental origins. The Gravity Spy project uses a machine-learning algorithm to classify glitches based upon their time-frequency morphology. The resulting set of classified glitches can be used as input to detector-characterisation investigations of how to mitigate glitches, or data-analysis studies of how to ameliorate the impact of glitches. Here we present the results of…
High-reflectivity fused silica mirrors are at the epicentre of current advanced gravitational wave detectors. In these detectors, the mirrors interact with high power laser beams. As a result of finite absorption in the high reflectivity coatings the mirrors suffer from a variety of thermal effects that impact on the detectors performance. We propose a model of the Advanced LIGO mirrors that introduces an empirical term to account for the radiative heat transfer between the mirror and its surroundings. The mechanical mode frequency is used as a probe for the overall temperature of the mirror. …
We anticipate the first direct detections of gravitational waves (GWs) with Advanced LIGO and Virgo later this decade. Though this groundbreaking technical achievement will be its own reward, a still greater prize could be observations of compact binary mergers in both gravitational and electromagnetic channels simultaneously. During Advanced LIGO and Virgo's first two years of operation, 2015 through 2016, we expect the global GW detector array to improve in sensitivity and livetime and expand from two to three detectors. We model the detection rate and the sky localization accuracy for binar…
Gravitational waves from binary black hole and neutron star mergers are being regularly detected. As of 2021, ninety confident gravitational wave detections have been made by the LIGO and Virgo detectors. Work is ongoing to further increase the sensitivity of the detectors for the fourth observing run, including installing some of the A+ upgrades designed to lower the fundamental noise that limits the sensitivity to gravitational waves. In this review, we will overview how the LIGO detectors work, including their optical configuration and lock acquisition procedure, discuss the detectors' fund…
The detectors of the laser interferometer gravitational-wave observatory (LIGO) are broadly limited by the quantum noise and rely on the injection of squeezed states of light to achieve their full sensitivity. Squeezing improvement is limited by mode mismatch between the elements of the squeezer and the interferometer. In the current LIGO detectors, there is no way to actively mitigate this mode mismatch. This paper presents a new deformable mirror for wavefront control that meets the active mode matching requirements of advanced LIGO. The active element is a piezo-electric transducer, which a…
The third observing run of Advanced LIGO and Advanced Virgo took place between April 2019 and March 2020 and resulted in dozens of gravitational-wave candidates, many of which are now published as confident detections. A crucial requirement of the third observing run has been the rapid identification and public reporting of compact binary mergers, which enabled massive followup observation campaigns with electromagnetic and neutrino observatories. PyCBC Live is a low-latency search for compact binary mergers based on frequency-domain matched filtering, which has been used during the second and…
Persistent gravitational waves from rapidly rotating neutron stars, such as those found in some young supernova remnants, may fall in the sensitivity band of the advanced Laser Interferometer Gravitational-wave Observatory (aLIGO). Searches for these signals are computationally challenging, as the frequency and frequency derivative are unknown and evolve rapidly due to the youth of the source. A hidden Markov model (HMM), combined with a maximum-likelihood matched filter, tracks rapid frequency evolution semi-coherently in a computationally efficient manner. We present the results of an HMM se…
We present a search for gravitational waves from double neutron star binaries inspirals in Advanced LIGO's first observing run. The search considers a narrow range of binary chirp masses motivated by the population of known double neutron star binaries in the nearby universe. This search differs from previously published results by providing the most sensitive published survey of neutron stars in Advanced LIGO's first observing run within this narrow mass range and including times when only one of the two LIGO detectors was in operation in the analysis. The search was sensitive to binary neutr…
The first detection of gravitational waves by the Laser Interferometer Gravitational-wave Observatory (LIGO) in 2015 launched the era of gravitational wave astronomy. The quest for gravitational wave signals from objects that are fainter or farther away impels technological advances to realize ever more sensitive detectors. Since 2019, one advanced technique, the injection of squeezed states of light is being used to improve the shot noise limit to the sensitivity of the Advanced LIGO detectors, at frequencies above $\sim 50$ Hz. Below this frequency, quantum back action, in the form of radiat…
Laser interferometers with high circulating power and suspended optics, such as the LIGO gravitational wave detectors, experience an optomechanical coupling effect known as a parametric instability: the runaway excitation of a mechanical resonance in a mirror driven by the optical field. This can saturate the interferometer sensing and control systems and limit the observation time of the detector. Current mitigation techniques at the LIGO sites are successfully suppressing all observed parametric instabilities, and focus on the behaviour of the instabilities in the Fabry-Perot arm cavities of…
In this paper, we report on the construction of a new and independent pipeline for analyzing the public data from the first observing run of advanced LIGO for mergers of compact binary systems. The pipeline incorporates different techniques and makes independent implementation choices in all its stages including the search design, the method to construct template banks, the automatic routines to detect bad data segments ("glitches") and to insulate good data from them, the procedure to account for the non-stationary nature of the detector noise, the signal-quality vetoes at the single-detector…
In modern high precision optical instruments, such as in gravitational wave detectors or frequency references, thermally induced fluctuations in the reflective coatings can be a limiting noise source. This noise, known as coating thermal noise, can be reduced by choosing materials with low mechanical loss. Examination of new materials becomes a necessity in order to further minimize the coating thermal noise and thus improve sensitivity of next generation instruments. We present a novel approach to directly measure coating thermal noise using a high finesse folded cavity in which multiple Herm…
We present the Global Rapid Advanced Network Devoted to the Multi-messenger Addicts (GRANDMA). The network consists of 21 telescopes with both photometric and spectroscopic facilities. They are connected together thanks to a dedicated infrastructure. The network aims at coordinating the observations of large sky position estimates of transient events to enhance their follow-up and reduce the delay between the initial detection and the optical confirmation. The GRANDMA program mainly focuses on follow-up of gravitational-wave alerts to find and characterise the electromagnetic counterpart durin…
The Advanced LIGO and Virgo experiments are poised to detect gravitational waves (GWs) directly for the first time this decade. The ultimate prize will be joint observation of a compact binary merger in both gravitational and electromagnetic channels. However, GW sky locations that are uncertain by hundreds of square degrees will pose a challenge. I describe a real-time detection pipeline and a rapid Bayesian parameter estimation code that will make it possible to search promptly for optical counterparts in Advanced LIGO. Having analyzed a comprehensive population of simulated GW sources, we d…
We integrate the entire, publicly available, Advanced LIGO (ALIGO) data set to obtain maximum-likelihood constraint maps of the Stochastic Gravitational-Wave Background (SGWB). From these we derive limits on the energy density of the stochastic background $Ω_{\rm GW}$, and its anisotropy. We find 95% confident limits $Ω_{\rm GW} < 5.2\times 10^{-8}$ at $50$ Hz for a spectral index $α=2/3$ consistent with a stochastic background due to inspiral events and $Ω_{\rm GW} < 3.2\times 10^{-7}$ for a scale (frequency) invariant spectrum. We also report upper limits on the angular power spectra $C_\ell…
We present a method to search for scalar field ultralight dark matter directly interacting with gravitational-wave interferometers via a modulation of the fine structure constant and the electron mass. This modulation induces an effective strain in solid materials at a frequency determined by the mass of the dark matter particle. We study the prospects for looking for such an effect in the LIGO detectors by using the solid cavity which is nominally used for pre-stabilizing the laser frequency and we project upper limits. We contextualize them with previous limits from GEO600, possible limits f…
