利用第二梯度模型对3D机织物的深拉伸进行建模
Modeling the deep drawing of a 3D woven fabric with a second gradient model
摘要:
干机织物的实验测试表现出一组复杂的证据,很难用经典的连续介质模型完全描述。本文的目的是显示如何引入能量项有关的织物的微观变形机制,特别是弯曲刚度的纱线,有助于在这种材料的力学行为的建模。为此,第二梯度,超弹性,最初正交各向异性连续体理论,提出了在有限应变纤维复合材料联锁模型。特别是,目前的工作探讨的发病之间的关系,出现在模拟机织物的深拉伸和使用第二梯度模型。结果表明,第二梯度项的引入占面内和面外弯曲刚度的描述,减少了起皱的发生在模拟拉深。在这项工作中,一个二次能量,大致成比例的平方的纤维的曲率,提出并实施的模拟。这个简单的本构假设允许清楚地显示第二梯度能量对模型的双曲描述和数值稳定性的影响。在第二梯度模拟中获得的结果描述了深冲压的实验证据,其描述是在这项工作中的目标。本文提供了额外的证据,第一梯度连续理论本身不能被认为是充分描述的干编织复合材料增强的行为。另一方面,所提出的第二梯度模型纤维复合材料增强开辟了道路,更准确地模拟复杂的成型过程和控制皱纹的发病的可能性。
英文摘要:
Experimental testing on dry woven fabrics exhibits a complex set of evidences that are difficult to be completely described using classical continuum models. The aim of this paper is to show how the introduction of energy terms related to the micro-deformation mechanisms of the fabric, in particular to the bending stiffness of the yarns, helps in the modeling of the mechanical behavior of this kind of materials. To this aim, a second gradient, hyperelastic, initially orthotropic continuum theory is proposed to model fibrous composite interlocks at finite strains. In particular, the present work explores the relationship between the onset of wrinkling appearing during the simulation of the deep drawing of a woven fabric and the use of a second gradient model. It is shown that the introduction of second gradient terms accounting for the description of in-plane and out-of-plane bending rigidities, decreases the onset of wrinkles during the simulation of deep-drawing. In this work, a quadratic energy, roughly proportional to the square of the curvature of the fibers, is presented and implemented in the simulations. This simple constitutive assumption allows to clearly show the effects of the second gradient energy on both the wrinkling description and the numerical stability of the model. The results obtained in second gradient simulations are descriptive of the experimental evidence of deep drawing whose description is targeted in this work. The present paper provides additional evidence of the fact that first gradient continuum theories alone cannot be considered fully descriptive of the behavior of dry woven composite reinforcements. On the other hand, the proposed second gradient model for fibrous composite reinforcements opens the way both to the more accurate simulation of complex forming processes and to the possibility of controlling the onset of wrinkles.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。