On-sky single-mode fiber coupling measurements at the Large Binocular Telescope
Andrew Bechter, Jonathan Crass, Ryan Ketterer, Justin R. Crepp, Robert O. Reynolds, Eric Bechter, Philip Hinz, Fernando Pedichini, Michael Foley, Elliott Runbur… 展开作者
Andrew Bechter, Jonathan Crass, Ryan Ketterer, Justin R. Crepp, Robert O. Reynolds, Eric Bechter, Philip Hinz, Fernando Pedichini, Michael Foley, Elliott Runburg, Eleanya Onuma, Scott Gaudi, Giuseppina Micela, Isabella Pagano, Charles E. Woodward
备注：
11 pages, 7 figures
发表信息：
Proc. SPIE 9909, Adaptive Optics Systems V, 99092X (27 July 2016)
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $μ$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.
Optimizing on-sky single-mode fiber (SMF) injection is an essential part of developing precise Doppler spectrometers and new astrophotonics technologies. We installed and tested a prototype SMF injection system at the Large Binocular Telescope (LBT) in April 2016. The fiber injection unit was built as part of the de-risking process for a new instrument named iLocater that will use adaptive optics (AO) to feed a high resolution, near-infrared spectrograph. In this paper we report Y-band SMF coupling measurements for bright, M-type stars. We compare theoretical expectations for delivered Strehl …
We are developing a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, i…
The Large Binocular Telescope Interferometer (LBTI) is a versatile instrument designed for high-angular resolution and high-contrast infrared imaging (1.5-13 microns). In this paper, we focus on the mid-infrared (8-13 microns) nulling mode and present its theory of operation, data reduction, and on-sky performance as of the end of the commissioning phase in March 2015. With an interferometric baseline of 14.4 meters, the LBTI nuller is specifically tuned to resolve the habitable zone of nearby main-sequence stars, where warm exozodiacal dust emission peaks. Measuring the exozodi luminosity fun…
The Large Binocular Telescope Interferometer is a high contrast imager and interferometer that sits at the combined bent Gregorian focus of the LBT's dual 8.4~m apertures. The interferometric science drivers dictate 0.1'' resolution with $10^3-10^4$ contrast at $10~μm$, while the $4~μm$ imaging science drivers require even greater contrasts, but at scales $>$0.2''. In imaging mode, LBTI's Adaptive Optics system is already delivering $4~μm$ contrast of $10^4-10^5$ at $0.3''-0.75''$ in good conditions. Even in poor seeing, it can deliver up to 90\% Strehl Ratio at this wavelength. However, the p…
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report o…
The Large Binocular Telescope (LBT) is a unique telescope featuring two co-mounted optical trains with 8.4m primary mirrors. The telescope Adaptive Optics (AO) system uses two innovative key components, namely an adaptive secondary mirror with 672 actuators and a high-order pyramid wave-front sensor. During the on-sky commissioning such a system reached performances never achieved before on large ground-based optical telescopes. Images with 40mas resolution and Strehl Ratios higher than 80% have been acquired in H band (1.6 micron). Such images showed a contrast as high as 10e-4. Based on thes…
PEPSI is the bench-mounted, two-arm, fibre-fed and stabilized Potsdam Echelle Polarimetric and Spectroscopic Instrument for the 2x8.4 m Large Binocular Telescope (LBT). Three spectral resolutions of either 43 000, 120 000 or 270 000 can cover the entire optical/red wavelength range from 383 to 907 nm in three exposures. Two 10.3kx10.3k CCDs with 9-μm pixels and peak quantum efficiencies of 96 % record a total of 92 echelle orders. We introduce a new variant of a wave-guide image slicer with 3, 5, and 7 slices and peak efficiencies between 96 %. A total of six cross dispersers cover the six wav…
Time-series photometry taken from ground-based facilities is improved with the use of comparison stars due to the short timescales of atmospheric-induced variability. However, the sky is bright in the thermal infrared (3-5 um), and the correspondingly small fields-of-view of available detectors make it highly unusual to have a calibration star in the same field as a science target. Here we present a new method of obtaining differential photometry by simultaneously imaging a science target and a calibrator star, separated by <2 amin, onto a 10x10 asec field-of-view detector. We do this by takin…
The Large Binocular Telescope Interferometer is a NASA-funded nulling and imaging instrument designed to coherently combine the two 8.4-m primary mirrors of the LBT for high-sensitivity, high-contrast, and high-resolution infrared imaging (1.5-13 um). PHASECam is LBTI's near-infrared camera used to measure tip-tilt and phase variations between the two AO-corrected apertures and provide high-angular resolution observations. We report on the status of the system and describe its on-sky performance measured during the first semester of 2014. With a spatial resolution equivalent to that of a 22.8-…
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the …
In February 2014, the SHARK-VIS (System for High contrast And coronography from R to K at VISual bands) Forerunner, a high contrast experimental imager operating at visible wavelengths, was installed at LBT (Large Binocular Telescope). Here we report on the first results obtained by recent on-sky tests. These results show the extremely good performance of the LBT ExAO (Extreme Adaptive Optics) system at visible wavelengths, both in terms of spatial resolution and contrast achieved. Similarly to what was done by (Amara et al. 2012), we used the SHARK-VIS Forerunner data to quantitatively assess…
We present preliminary results on on-sky test of sky subtraction methods for fiber-fed spectrograph. Using dedicated observation with FLAMES/VLT in I-band, we have tested the accuracy of the sky subtraction for 4 sky subtraction methods: mean sky, closest sky, dual stare and cross-beam switching. The cross beam-switching and dual stare method reach accuracy and precision of the sky subtraction under 1%. In contrast to the commonly held view in the literature, this result points out that fiber-fed spectrographs are adapted for the observations of faint targets.
We present a new method to subtract sky light from faint object observations with fiber-fed spectrographs. The algorithm has been developed in the framework of the phase A of OPTIMOS-EVE, an optical-to-IR multi-object spectrograph for the future european extremely large telescope (E-ELT). The new technique overcomes the apparent limitation of fiber-fed instrument to recover with high accuracy the sky contribution. The algorithm is based on the reconstruction of the spatial fluctuations of the sky background (both continuum and emission) and allows us to subtract the sky background contribution…
GJ3470b is a rare example of a "hot Uranus" transiting exoplanet orbiting a nearby M1.5 dwarf. It is of crucial interest for atmospheric studies because it is one of the most inflated low-mass planets known, bridging the boundary between "super-Earths" and Neptunian planets. We present two new ground-based light curves of GJ3470b gathered by the LBC camera at the Large Binocular Telescope. Simultaneous photometry in the ultraviolet (lambda_c = 357.5 nm) and optical infrared (lambda_c = 963.5 nm) allowed us to detect a significant change of the effective radius of GJ3470b as a function of wavel…
FIRST, the Fibered Imager foR a Single Telescope, is a spectro-imager using single-mode fibers for pupil remapping, allowing measurements beyond the telescope diffraction limit. Integrated on the Subaru Coronagraphic Extreme Adaptive Optics instrument at the Subaru Telescope, it benefits from a very stable visible light wavefront allowing to acquire long exposure and operate on significantly fainter sources than previously possible. On-sky results demonstrated the ability of the instrument to detect stellar companions separated 43mas in the case of the Capella binary system. A similar approach…
Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater's design is used to quantify and assess the relative advantages and drawbacks of precise Doppler time series measurements made at the diffraction limit. This framework can be applied for trade-study w…
Sky subtraction is the key technique in data reduction of multi-fiber spectra. Knowledge of the related instrument character is necessary to determine the method adopted in sky subtraction. In this study, we described the sky subtraction method designed for LAMOST(Large sky Area Multi-Object fiber Spectroscopic Telescope) survey. The method has been intergrated into LAMOST 2D Pipeline v2.6 and applied to data of LAMOST DR3 and later. For LAMOST, sky emission line calibration is used to alleviate the position-dependent (thus time-dependent) ~4% fiber throughput uncertainty and the small wavelen…
MagAO is the new adaptive optics system with visible-light and infrared science cameras, located on the 6.5-m Magellan "Clay" telescope at Las Campanas Observatory, Chile. The instrument locks on natural guide stars (NGS) from 0$^\mathrm{th}$ to 16$^\mathrm{th}$ $R$-band magnitude, measures turbulence with a modulating pyramid wavefront sensor binnable from 28x28 to 7x7 subapertures, and uses a 585-actuator adaptive secondary mirror (ASM) to provide flat wavefronts to the two science cameras. MagAO is a mutated clone of the similar AO systems at the Large Binocular Telescope (LBT) at Mt. Graha…
We review the current status of the facility instrumentation for the Large Binocular Telescope (LBT). The LBT has 2x 8.4m primary mirrors on a single mount with an effective collecting area of 11.8m or 23m when interferometrically combined. The facility instruments are: 1) the Large Binocular Cameras (LBCs), each with a 23'x25' field of view (FOV). The blue and red optimized optical LBCs are mounted at the prime focus of the left and right primary mirrors, respectively. The filter suite of the two LBCs covers 0.3-1.1μm, including the new TiO (0.78μm) and CN (0.82μm) filters; 2) the Multi-Objec…
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential…
In this paper we present the first on-sky results with the fibered aperture masking instrument FIRST. Its principle relies on the combination of spatial filtering and aperture masking using single-mode fibers, a novel technique that is aimed at high dynamic range imaging with high angular resolution. The prototype has been tested with the Shane 3-m telescope at Lick Observatory. The entrance pupil is divided into subpupils feeding single-mode fibers. The flux injection into the fibers is optimized by a segmented mirror. The beams are spectrally dispersed and recombined in a non-redundant exit …
The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the baryon acoustic oscillations technique. The spectra of 35 million galaxies and quasars over 14,000 square degrees will be measured during a 5-year survey. A new prime focus corrector for the Mayall telescope at Kitt Peak National Observatory will deliver light to 5,000 individually targeted fiber-fed robotic positioners. The fibers in turn feed ten broadband multi-object spectrographs. We describe the ProtoDESI experiment, that was installed and commissioned on the 4…
Commissioning and on-sky performance verification of iLocater
The Ohio State University（俄亥俄州立大学）；University of Notre Dame（圣母大学）；Macquarie University（麦考瑞大学）；University of Arizona（亚利桑那大学）；University of Texas at Austin（德克萨斯大学奥斯汀分校）；Zentrum für Astronomie der Universität Heidelberg（海德堡大学天文学中心）；Universität Heidelberg（海德堡大学）；Large Binocular Telescope Observatory（大型双筒望远镜天文台）；NASA Goddard Space Flight Center（美国宇航局戈达德太空飞行中心）；University of Cambridge（剑桥大学）；Physikalisch-Technische Bundesanstalt（德国联邦物理技术研究院）；Max Planck Institute for Astronomy（马克斯·普朗克天文学研究所）；Fathom Imaging Systems（Fathom成像系统）；California Institute of Technology（加州理工学院）
Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system for the SAAO 1.9 m telescope
South African Astronomical Observatory（南非天文台）；Sub-department of Astrophysics, University of Oxford（牛津大学天体物理子系）；Department of Astronomy, University of Cape Town（开普敦大学天文学系）；Space Science and Engineering Initiative, College of Engineering, University of Hawaii at Manoa（夏威夷大学马诺阿分校工程学院空间科学与工程倡议）；Centre for Space Research, North-West University（西北大学空间研究中心）；University of Wisconsin–Madison（威斯康星大学麦迪逊分校）
The Keck Planet Imager and Characterizer (KPIC) is an upgrade to the Keck II adaptive optics system that includes an active fiber injection unit (FIU) for efficiently routing light from exoplanets to NIRSPEC, a high-resolution spectrograph. Towards the end of 2019, we will add a suite of new coronagraph modes as well as a high-order deformable mirror. One of these modes, operating in $K$-band (2.2$μm$), will be the first vortex fiber nuller to go on sky. Vortex Fiber Nulling (VFN) is a new interferometric method for suppressing starlight in order to spectroscopically characterize exoplanets at…
To study the quality of stellar spectra of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) and the correctness of the corresponding stellar parameters derived by the LASP (LAMOST Stellar Parameter Pipeline), the outlier analysis method is applied to the archived AFGK stars in the fifth data release (DR5) of LAMOST. The outlier factor is defined in order to sort more than 3 million stellar spectra selected from the DR5 Stellar Parameter catalog. We propose an improved Local Outlier Factor (LOF) method based on Principal Component Analysis and Monte Carlo to enable the com…
We describe and characterize a 25 GHz laser frequency comb based on a cavity-filtered erbium fiber mode-locked laser. The comb provides a uniform array of optical frequencies spanning 1450 nm to 1700 nm, and is stabilized by use of a global positioning system referenced atomic clock. This comb was deployed at the 9.2 m Hobby-Eberly telescope at the McDonald Observatory where it was used as a radial velocity calibration source for the fiber-fed Pathfinder near-infrared spectrograph. Stellar targets were observed in three echelle orders over four nights, and radial velocity precision of \sim10 m…
A new "self-calibrated" statistical analysis method has been developed for the reduction of nulling interferometry data. The idea is to use the statistical distributions of the fluctuating null depth and beam intensities to retrieve the astrophysical null depth (or equivalently the object's visibility) in the presence of fast atmospheric fluctuations. The approach yields an accuracy much better (about an order of magnitude) than is presently possible with standard data reduction methods, because the astrophysical null depth accuracy is no longer limited by the magnitude of the instrumental pha…
Fiber-fed spectrographs dedicated to observing massive portions of the sky are increasingly being more demanded within the astronomical community. For all the fiber-fed instruments, the primordial and common problem is the positioning of the fiber ends, which must match the position of the objects of a target field on the sky. Amongst the different approaches found in the state of the art, actuator arrays are one of the best. Indeed, an actuator array is able to position all the fiber heads simultaneously, thus making the reconfiguration time extremely short and the instrument efficiency high.…
The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction-limited, high-resolution ($R>30,000$) spectroscopy of exoplanets and low-mass companions in the K and L bands. Phase I consisted of single-mode fiber injection/extraction units (FIU/FEU) used in conjunction with an H-band pyramid wavefront sensor. Phase II, deployed and commissioned in 2022, adds a 1000-actuator deformable mirror, beam-shaping optics, a vortex coronagraph, and other upgrades to the FIU/FEU. The use of single-mode…
$J$ and $H$ band sky brightness measurements from polar day to polar night at Dome A, Antarctica
School of Physics and Astronomy, Sun Yat-sen University（中山大学物理学院）；National Astronomical Observatories, Chinese Academy of Sciences（中国科学院国家天文台）；School of Physics, University of New South Wales（新南威尔士大学物理学院）；CSST Science Center for the Guangdong-Hong Kong-Macau Greater Bay Area（中国空间站科学中心粤港澳大湾区分中心）
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and…
We describe the design, manufacture, and performance of bare-fiber integral field units (IFUs) for the SDSS-IV survey MaNGA (Mapping Nearby Galaxies at APO) on the the Sloan 2.5 m telescope at Apache Point Observatory (APO). MaNGA is a luminosity-selected integral-field spectroscopic survey of 10,000 local galaxies covering 360-1030 nm at R ~ 2200. The IFUs have hexagonal dense packing of fibers with packing regularity of 3 um (RMS), and throughput of 96+/-0.5% from 350 nm to 1 um in the lab. Their sizes range from 19 to 127 fibers (3-7 hexagonal layers) using Polymicro FBP 120:132:150 um core…
The current generation of precision radial velocity (RV) spectrographs are seeing-limited instruments. In order to achieve high spectral resolution on 8m class telescopes, these spectrographs require large optics and in turn, large instrument volumes. Achieving milli-Kelvin thermal stability for these systems is challenging but is vital in order to obtain a single measurement RV precision of better than 1m/s. This precision is crucial to study Earth-like exoplanets within the habitable zone. iLocater is a next generation RV instrument being developed for the Large Binocular Telescope. Unlike s…
We have built and commissioned a prototype agitated non-circular core fiber scrambler for precision spectroscopic radial velocity measurements in the near-infrared H band. We have collected the first on-sky performance and modal noise tests of these novel fibers in the near-infrared at H and K bands using the CSHELL spectrograph at the NASA InfraRed Telescope Facility (IRTF). We discuss the design behind our novel reverse injection of a red laser for co-alignment of star-light with the fiber tip via a corner cube and visible camera. We summarize the practical details involved in the constructi…
iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to generate extremely precise RV measurements, it differs from conventional Doppler spectrographs, and therefore carries additional risk. To aid with the design of the instrument, we have developed a compr…
We present flame, a pipeline for reducing spectroscopic observations obtained with multi-slit near-infrared and optical instruments. Because of its flexible design, flame can be easily applied to data obtained with a wide variety of spectrographs. The flexibility is due to a modular architecture, which allows changes and customizations to the pipeline, and relegates the instrument-specific parts to a single module. At the core of the data reduction is the transformation from observed pixel coordinates (x, y) to rectified coordinates (lambda, gamma). This transformation consists in the polynomi…
Adaptive optics systems are an essential technology for the modern astronomy for ground based telescopes. One of the most recent revolution in the field is the introduction of the pyramid wavefront sensor. The higher performance of this device is payed with increased complexity in the control. In this work we report about advances in the AO system control obtained with SOULat the Large Binocular Telescope. The first is an improved Tip/Tilt temporal control able to recover the nominal correction even in presence of high temporal frequency resonances. The second one is a modal gain optimization …
Visible-light long baseline interferometry holds the promise of advancing a number of important applications in fundamental astronomy, including the direct measurement of the angular diameters and oblateness of stars, and the direct measurement of the orbits of binary and multiple star systems. To advance, the field of visible-light interferometry requires development of instruments capable of combining light from 15 baselines (6 telescopes) simultaneously. The Visible Imaging System for Interferometric Observations at NPOI (VISION) is a new visible light beam combiner for the Navy Precision O…
High-precision spectrographs play a key role in exoplanet searches using the radial velocity technique. But at the accuracy level of 1 m.s-1, required for super-Earth characterization, stability of fiber-fed spectrograph performance is crucial considering variable observing conditions such as seeing, guiding and centering errors and, telescope vignetting. In fiber-fed spectrographs such as HARPS or SOPHIE, the fiber link scrambling properties are one of the main issues. Both the stability of the fiber near-field uniformity at the spectrograph entrance and of the far-field illumination on the e…
FIRST, the Fibered Imager foR a Single Telescope instrument, is an ultra-high angular resolution spectro-imager, able to deliver calibrated images and measurements beyond the telescope diffraction limit, a regime that is out of reach for conventional AO imaging. FIRST achieves sensitivity and accuracy by coupling the full telescope to an array of single mode fibers. Interferometric fringes are spectrally dispersed and imaged on an EMCCD. An 18-Fiber FIRST setup is currently installed on the Subaru Coronographic Extreme Adaptive Optics instrument at Subaru telescope. It is being exploited for b…
On-Sky Single-photon Time resolution of 35 ps with White Rabbit synchronization: towards the measurement of the size of a White Dwarf star
Université Côte d’Azur（蔚蓝海岸大学）；CNRS, Institut de Physique de Nice（法国国家科学研究中心尼斯物理研究所）；Instituto de Ciencias Físicas (ICIFI, UNSAM - CONICET)（物理科学研究院（ICIFI，UNSAM-CONICET））；Universite Cote d’Azur, Observatoire de la Cote d’Azur, CNRS, Laboratoire Lagrange（蔚蓝海岸大学蔚蓝海岸天文台法国国家科学研究中心拉格朗日实验室）
The Maunakea Spectroscopic Explorer (MSE) will each year obtain millions of spectra in the optical to near-infrared, at low (R ~ 3,000) to high (R ~ 40,000) spectral resolution by observing >4,000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. One key metric of the success of MSE will be its survey speed, i.e. how many spectra of good signal-to-noise ratio will MSE be able to obtain every…
The Habitable zone Planet Finder (HPF) is a fiber fed precise radial velocity spectrograph at the 10 m Hobby Eberly Telescope (HET). Due to its fixed altitude design, the HET pupil changes appreciably across a track, leading to significant changes of the fiber far-field illumination. HPF's fiber scrambler is designed to suppress the impact of these illumination changes on the radial velocities -- but the residual impact on the radial velocity measurements has yet to be probed on sky. We use GJ 411, a bright early type (M2) M dwarf to probe the effects of far-field input trends due to these pup…
Giano is a Cryogenic Spectrograph located in T.N.G. (Spain) and commisioned in 2013. It works in the range 950-2500 nm with a resolving power of 50000. This instrument was designed and built for direct feeding from the telescope [2]. However, due to constraints imposed on the telescope interfacing during the pre-commissioning phase, it had to be positioned on the rotating building, far from the telescope focus. Therefore, a new interface to the telescope, based on IR-transmitting ZBLAN fibers with 85μm core, was developed.Originally designed to work directly at the $f/11$ nasmyth focus of the …
Single-aperture spectro-interferometry in the visible at the Subaru telescope with FIRST: First on-sky demonstration on Keho'oea (α Lyrae) and Hokulei (α Aurigae)
