加速更安全的RC4:分阶段实现7种FPGA设计,每时钟高达8字节
Accelerating More Secure RC4 : Implementation of Seven FPGA Designs in Stages upto 8 byte per clock
摘要:
如果在KSA和PRGA之间引入额外的RC 4-like Post-KSA Random Shuffing(PKRS)过程,则可以使RC 4更加安全。如果在FPGA嵌入式系统中使用并行运行的多个协处理器处理RC 4字节,也可以使速度显著加快。PKRS过程被调整以形成涉及多个协处理器的特定设计架构所需的尽可能多的S盒,每个协处理器进行逐字节处理。根据一个新的想法[1] [2],如果逐字节处理被处理两个连续字节的方案所取代,每个处理器的执行速度也会得到另一个倍数的提高。采用一些新的创新理念,在一个合适的FPGA嵌入式系统中,提出了三种硬件设计结构,分别采用1、2和4个协处理器并行工作,并研究了通过逐字节方式处理字节来加速RC 4,实现从1字节到4字节的吞吐量。硬件设计进行了适当升级,通过一起处理2个独立的RC 4字节来进一步加速RC 4,并且在Xilinx Virtex-5 LX 110 t FPGA [3]架构中可以实现每时钟8字节的最大吞吐量,然后在两个FPGA板之间进行安全的数据通信。
英文摘要:
RC4 can be made more secured if an additional RC4-like Post-KSA Random Shuffing (PKRS) process is introduced between KSA and PRGA. It can also be made significantly faster if RC4 bytes are processed in a FPGA embedded system using multiple coprocessors functioning in parallel. The PKRS process is tuned to form as many S-boxes as required by particular design architectures involving multiple coprocessors, each one undertaking byte-by-byte processing. Following a ecent idea [1] [2] the speed of execution of each processor is also enhanced by another fold if the byte-by-byte processing is replaced by a scheme of processing two consecutive bytes together. Adopting some new innovative concepts, three hardware design architectures are proposed in a suitable FPGA embedded system involving 1, 2 and 4 coprocessors functioning in parallel and a study is made on accelerating RC4 by processing bytes in byte-by-byte mode achieving throughputs from 1-byte-in-1-clock to 4-bytes-in-1-clock. The hardware designs are appropriately upgraded to accelerate RC4 further by processing 2 onsecutive RC4 bytes together and it has been possible to achieve a maximum throughput of 8-bytes per clock in Xilinx Virtex-5 LX110t FPGA [3] architecture followed by secured data communication between two FPGA boards.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。