ASIC一种10 GBASE-T以太网标准的噪声梯度下降位翻转解码器设计
ASIC Design of a Noisy Gradient Descent Bit Flip Decoder for 10GBASE-T Ethernet Standard
摘要:
在本文中,NGDBF算法实现的代码,部署在IEEE 802.3an以太网标准。该设计采用了完全并行的架构,并在两个阶段:启动阶段和解码阶段。两阶段操作保持高延迟操作离线,从而减少解码阶段期间的解码延迟。该设计是基准与其他国家的最先进的设计在相同的代码,采用不同的算法和架构。结果表明,NGDBF解码器具有更好的面积效率和更好的能量效率相比,其他国家的最先进的解码器。当该设计在中到高信噪比下工作时,该设计能够提供大于所需的最小吞吐量10 Gbps。该设计的功耗为0.81mm ~ 2,能量效率为1.7pJ/bit,均为文献报道的最低值。与其他简化的解码器实现相比,该设计还提供了更好的错误性能,并且与最近提出的设计相比,消耗更少的线长。
英文摘要:
In this paper, the NGDBF algorithm is implemented on a code that is deployed in the IEEE 802.3an Ethernet standard. The design employs a fully parallel architecture and operates in two-phases: start-up phase and decoding phase. The two phase operation keeps the high latency operations off-line, thereby reducing the decoding latency during the decoding phase. The design is bench-marked with other state-of-the-art designs on the same code that employ different algorithms and architectures. The results indicate that the NGDBF decoder has a better area efficiency and a better energy efficiency compared to other state-of-art decoders. When the design is operated in medium to high signal to noise ratios, the design is able to provide greater than the required minimum throughput of 10Gbps. The design consumes 0.81mm2 of area and has an energy efficiency of 1.7pJ/bit, which are the lowest in the reported literature. The design also provides better error performance compared to other simplified decoder implementations and consumes lesser wire-length compared to a recently proposed design.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。