arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1606.04567cs.CEcs.NAmath.NAphysics.comp-phstat.ML
收藏

基于回归的降阶模型用于预测增强地热系统瞬态热输出

Regression-based reduced-order models to predict transient thermal output for enhanced geothermal systems

Earth and Environmental Sciences Division, Los Alamos National Laboratory(地球与环境科学处,洛斯阿拉莫斯国家实验室)

M. K. Mudunuru, S. Karra, D. R. Harp, G. D. Guthrie, H. S. Viswanathan

AI总结:

本文基于降阶模型预测增强地热系统瞬态热输出,通过敏感参数识别和模型简化,提出三种不同复杂度的ROM,验证其在不同渗透率下的预测能力。

摘要:

本文旨在评估基于三维物理模型开发的降阶模型(ROM)在预测增强地热储层瞬态热功率输出时的实用性,同时明确考虑地下系统和现场特定细节的不确定性。通过拉丁超立方抽样对模型输入进行数值模拟,识别出关键敏感参数,包括裂缝区渗透率、井/皮层因子、底孔压力和注入流量率。ROM的输入基于这些关键敏感参数,然后用于评估地下属性对热功率生产曲线的影响。所得到的ROM与现场数据和详细物理数值模拟进行比较。我们提出三种不同模型简洁程度的ROM,每种都描述了功率生产曲线的关键和本质特征。ROM-1能够准确再现低渗透率下的数值模拟功率输出以及某些现场数据特征,且相对简洁。ROM-2比ROM-1更复杂,但能准确描述现场数据。在较高渗透率下,ROM-2比ROM-1更准确地再现数值结果,但在低裂缝区渗透率下存在显著偏差。ROM-3结合了ROM-1和ROM-2的最佳特性,提供了一个折中的模型简洁性。它能够描述各种数值模拟和现场数据的特征。从所提出的流程中,我们证明所提出的简单ROM能够捕捉Fenton Hill HDR系统功率生产曲线的多种复杂特征。对于典型EGS应用,ROM-2和ROM-3优于ROM-1。

英文摘要:

The goal of this paper is to assess the utility of Reduced-Order Models (ROMs) developed from 3D physics-based models for predicting transient thermal power output for an enhanced geothermal reservoir while explicitly accounting for uncertainties in the subsurface system and site-specific details. Numerical simulations are performed based on Latin Hypercube Sampling (LHS) of model inputs drawn from uniform probability distributions. Key sensitive parameters are identified from these simulations, which are fracture zone permeability, well/skin factor, bottom hole pressure, and injection flow rate. The inputs for ROMs are based on these key sensitive parameters. The ROMs are then used to evaluate the influence of subsurface attributes on thermal power production curves. The resulting ROMs are compared with field-data and the detailed physics-based numerical simulations. We propose three different ROMs with different levels of model parsimony, each describing key and essential features of the power production curves. ROM-1 is able to accurately reproduce the power output of numerical simulations for low values of permeabilities and certain features of the field-scale data, and is relatively parsimonious. ROM-2 is a more complex model than ROM-1 but it accurately describes the field-data. At higher permeabilities, ROM-2 reproduces numerical results better than ROM-1, however, there is a considerable deviation at low fracture zone permeabilities. ROM-3 is developed by taking the best aspects of ROM-1 and ROM-2 and provides a middle ground for model parsimony. It is able to describe various features of numerical simulations and field-data. From the proposed workflow, we demonstrate that the proposed simple ROMs are able to capture various complex features of the power production curves of Fenton Hill HDR system. For typical EGS applications, ROM-2 and ROM-3 outperform ROM-1.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑