多孔砂岩声速测量方法。测量、有限元建模和衍射校正
Sound velocity measurement methods for porous sandstone. Measurements, finite element modelling, and diffraction correction
摘要:
含天然气水合物多孔岩石的声学材料参数对于评价潜在地与CO2注入相结合的开采地球地下存在的巨大甲烷气体资源的方法是重要的。对高压水合物形成条件下多孔岩石纵波速度随甲烷水合物含量变化的测量方法进行了试验和评价,并对影响测量精度的因素进行了分析。压力室中有限的可用空间对测量方法提出了挑战。有几种效应会影响测量的压缩波速度,例如侧壁反射的干扰、衍射效应、用于实现声耦合的扭矩(力)量以及水饱和岩石样本的排水。将在大气条件下在压力室中使用固体缓冲方法的测试测量与使用水浴浸没测量方法的独立测量进行比较。在稳态区以500 kHz的频率对各种有机玻璃和Bentheim砂岩样品进行了纵波速度测量。与有机玻璃试样的固体缓冲测量方法的有限元模拟已被用于与测量进行比较,并帮助设计,控制和评估的测量方法和结果。两种测量方法之间的高度有利的协议已经获得,也相对于重复性和再现性。结果表明,固体缓冲法适用于Bentheim砂岩压力室,在高压水合物形成条件下改变甲烷水合物含量,定量测定这类岩心样品在这些频率下的纵波速度。
英文摘要:
Acoustic material parameters of gas hydrate bearing porous rocks are important for evaluation of methods to exploit the vast methane gas resources present in the earth's subsurface, potentially combined with CO2 injection. A solid buffer method for measuring changes of the compressional wave velocity in porous rocks with changing methane hydrate contents under high-pressure hydrate-forming conditions, is tested and evaluated with respect to effects influencing on the measurement accuracy. The limited space available in the pressure chamber represents a challenge for the measurement method. Several effects affect the measured compressional wave velocity, such as interference from sidewall reflections, diffraction effects, the amount of torque (force) used to achieve acoustic coupling, and water draining of the watersaturated rock specimen. Test measurements using the solid buffer method in the pressure chamber at atmospheric conditions are compared to independent measurements using a water-bath immersion measurement method. Compressional wave velocity measurements have been done in the steady state region at frequency 500 kHz for various specimen made of plexiglas and Bentheim sandstone. Finite element simulations of the solid buffer measurement method with plexiglas specimen have been used for comparison with the measurements, and to aid in the design, control, and evaluation of the measurement method and results. Highly favorable agreement between the two measurement methods has been obtained, also with respect to repeatability and reproducibility. The results indicate that the solid buffer method may be suitable for use in the pressure chamber with Bentheim sandstone and changing methane hydrate contents under high-pressure hydrate-forming conditions, for quantitative measurements of the compressional wave velocity in such rock core samples at these frequencies.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。