In this paper, based on the previous work [B. Shi, Z. Guo, Lattice Boltzmann model for nonlinear convection-diffusion equations, Phys. Rev. E 79 (2009) 016701], we develop a general multiple-relaxation-time (MRT) lattice Boltzmann model for nonlinear anisotropic convection-diffusion equation (NACDE), and show that the NACDE can be recovered correctly from the present model through the Chapman-Enskog analysis. We then test the MRT model through some classic CDEs, and find that the numerical results are in good agreement with analytical solutions or some available results. Besides, the numerical results also show that similar to the single-relaxation-time (SRT) lattice Boltzmann model or so-called BGK model, the present MRT model also has a second-order convergence rate in space. Finally, we also perform a comparative study on the accuracy and stability of the MRT model and BGK model by using two examples. In terms of the accuracy, both the theoretical analysis and numerical results show that a \emph{numerical} slip on the boundary would be caused in the BGK model, and cannot be eliminated unless the relaxation parameter is fixed to be a special value, while the \emph{numerical} slip in the MRT model can be overcome once the relaxation parameters satisfy some constrains. The results in terms of stability also demonstrate that the MRT model could be more stable than the BGK model through tuning the free relaxation parameters.
The purposes of this paper are testing an efficiency algorithm based on LBM and using it to analyze two-dimensional natural convection with low Prandtl number. Steady state or oscillatory results are obtained using double multiple-relaxation-time thermal lattice Boltzmann method. The velocity and temperature fields are solved using D2Q9 and D2Q5 models, respectively. With different Rayleigh number, the tested natural convection can either achieve to steady state or oscillatory. With fixed Rayleigh number, lower Prandtl number leads to a weaker convection effect, longer oscillation period and h…
Multiple-relaxation-time model (MRT) has more advantages than the many others approaches in the Lattice Boltzmann Method (LBM). Three-dimensional double MRT model is proposed for the first time for fluid flow and heat transfer simulation. Three types of cubic natural convection problems are solved with proposed method at various Rayleigh numbers. Two opposite vertical walls on the left and right are kept at different temperatures for all three types, while the remained four walls are either adiabatic or have linear temperature variations. For the first two types of cubic natural convections th…
In this paper, a three-dimensional (3D) multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is presented for convection heat transfer in porous media at the representative elementary volume (REV) scale. The model is developed in the framework of the double-distribution-function (DDF) approach: an MRT-LB model of the density distribution function with the D3Q19 lattice (or D3Q15 lattice) is proposed to simulate the flow field based on the generalized non-Darcy model, while an MRT-LB model of the temperature distribution function with the D3Q7 lattice is proposed to simulate the temperat…
A block triple-relaxation-time (B-TriRT) lattice Boltzmann model for general nonlinear anisotropic convection-diffusion equations (NACDEs) is proposed, and the Chapman-Enskog analysis shows that the present B-TriRT model can recover the NACDEs correctly. There are some striking features of the present B-TriRT model: firstly, the relaxation matrix of B-TriRT model is partitioned into three relaxation parameter blocks, rather than a diagonal matrix in general multiple-relaxation-time (MRT) model; secondly, based on the analysis of half-way bounce-back (HBB) scheme for Dirichlet boundary conditio…
A modified lattice Boltzmann model with multiple relaxation times (MRT) for the convection-diffusion equation (CDE) is proposed. By modifying the relaxation matrix, as well as choosing the corresponding equilibrium distribution function properly, the present model can recover the CDE with anisotropic diffusion coefficient with no deviation term even when the velocity vector varies generally with space or time through the Chapman-Enskog analysis. This model is firstly validated by simulating the diffusion of a Gaussian hill, which demonstrates it can handle the anisotropic diffusion problem cor…
In this paper, we develop a discrete unified gas kinetic scheme (DUGKS) for general nonlinear convection-diffusion equation (NCDE), and show that the NCDE can be recovered correctly from the present model through the Chapman-Enskog analysis. We then test the present DUGKS through some classic convection-diffusion equations, and find that the numerical results are in good agreement with analytical solutions and the DUGKS model has a second-order convergence rate. Finally, as a finite-volume method, DUGKS can also adopt the non-uniform mesh. Besides, we performed some comparisons among the DUGKS…
In this paper, we perform a more general analysis on the discrete effects of some boundary schemes of the popular one- to three-dimensional DnQq multiple-relaxation-time lattice Boltzmann model for convection-diffusion equation (CDE). Investigated boundary schemes include anti-bounce-back(ABB) boundary scheme, bounce-back(BB) boundary scheme and non-equilibrium extrapolation(NEE) boundary scheme. In the analysis, we adopt a transform matrix $\textbf{M}$ constructed by natural moments in the evolution equation, and the result of ABB boundary scheme is consistent with the existing work of orthog…
In this paper, a two-dimensional (2D) multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is developed for simulating convection heat transfer in porous media at the representative elementary volume scale. In the model, a MRT-LB equation is used to simulate the flow field, while another MRT-LB equation is employed to simulate the temperature field. The effect of the porous media is considered by introducing the porosity into the equilibrium moments, and adding a forcing term to the MRT-LB equation of the flow field in the moment space. The present MRT-LB model is validated by numerical…
Double-diffusive convection in porous media is a common phenomenon in nature, and has received considerable attention in a wide variety of engineering applications. In this paper, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is developed for simulating double-diffusive convection in porous media at the representative elementary volume scale. The MRT-LB model is constructed in the framework of the triple-distribution-function approach: the velocity field, the temperature and concentration fields are solved separately by three different MRT-LB equations. The present model has tw…
In this paper, a multiple-distribution-function lattice Boltzmann method (MDF-LBM) with multiple-relaxation-time model is proposed for incompressible Navier-Stokes equations (NSEs) which are considered as the coupled convection-diffusion equations (CDEs). Through direct Taylor expansion analysis, we show that the Navier-Stokes equations can be recovered correctly from the present MDF-LBM, and additionally, it is also found that the velocity and pressure can be directly computed through the zero and first-order moments of distribution function. Then in the framework of present MDF-LBM, we devel…
In this paper, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is proposed for convection heat transfer in porous media under local thermal non-equilibrium (LTNE) condition. The model is constructed within the framework of the three-distribution-function approach: two temperature-based MRT-LB equations are proposed for the temperature fields of fluid and solid phases in addition to the MRT-LB equation of a density distribution function for the velocity field described by the generalized non-Darcy model. The thermal non-equilibrium effects are incorporated into the model by adding…
When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space of central moments (CMs) to enhance numerical stability for high Reynolds numbers. The adopted forcing scheme, consistent with the CMs-based LBM, leads to a concise yet robust algorithm. Furthermore,…
When the flow is sufficiently rarefied, a temperature gradient, for example, between two walls separated by a few mean free paths, induces a gas flow---an observation attributed to the thermo-stress convection effects at microscale. The dynamics of the overall thermo-stress convection process is governed by the Boltzmann equation---an integro-differential equation describing the evolution of the molecular distribution function in six-dimensional phase space---which models dilute gas behavior at the molecular level to accurately describe a wide range of flow phenomena. Approaches for solving th…
We present numerical simulations of three-dimensional thermal convective flows in a cubic cell at high Rayleigh number using thermal lattice Boltzmann (LB) method. The thermal LB model is based on double distribution function approach, which consists of a D3Q19 model for the Navier-Stokes equations to simulate fluid flows and a D3Q7 model for the convection-diffusion equation to simulate heat transfer. Relaxation parameters are adjusted to achieve the isotropy of the fourth-order error term in the thermal LB model. Two types of thermal convective flows are considered: one is laminar thermal co…
Rectangular multiple-relaxation-time lattice Boltzmann method for the Navier-Stokes and nonlinear convection-diffusion equations: General equilibrium and some important issues
In this paper, a central-moment-based lattice Boltzmann (CLB) method for incompressible thermal flows is proposed. In the method, the incompressible Navier-Stokes equations and the convection-diffusion equation for the temperature field are sloved separately by two different CLB equations. Through the Chapman-Enskog analysis, the macroscopic governing equations for incompressible thermal flows can be reproduced. For the flow field, the tedious implementation for CLB method is simplified by using the shift matrix with a simplified central-moment set, and the consistent forcing scheme is adopted…
In this paper, we first present a unified framework for the modelling of generalized lattice Boltzmann method (GLBM). We then conduct a comparison of the four popular analysis methods (Chapman-Enskog analysis, Maxwell iteration, direct Taylor expansion and recurrence equations approaches) that have been used to obtain the macroscopic Navier-Stokes equations and nonlinear convection-diffusion equations from the GLBM, and show that from mathematical point of view, these four analysis methods are equivalent to each other. Finally, we give some elements that are needed in the implementation of the…
This paper presents a lattice Boltzmann model to simulate the aqueous humor (AH) dynamics in the human eyes by involving incompressible Navier-Stokes flow, heat convection and diffusion, and Darcy seepage flow. Verifying simulations indicate that the model is stable, convergent and robust. Further investigations were carried out, including the effects of heat convection and buoyancy, AH production rate, permeability of trabecular meshwork, viscosity of AH and anterior chamber angle on intraocular pressure (IOP). The heat convection and diffusion can significantly affect the flow patterns in th…
In this work, a third-order Chapman-Enskog analysis of the multiple-relaxation-time (MRT) pseudopotential lattice Boltzmann (LB) model for multiphase flow is performed for the first time. The leading terms on the interaction force, consisting of an anisotropic and an isotropic term, are successfully identified in the third-order macroscopic equation recovered by the lattice Boltzmann equation (LBE), and then new mathematical insights into the pseudopotential LB model are provided. For the third-order anisotropic term, numerical tests show that it can cause the stationary droplet to become out-…
In this paper, we extend a lattice Boltzmann equation (LBE) with continuous surface fore (CSF) to simulate thermocapillary flows. The model is designed on our previous CSF LBE for athermal two phase flow, in which the interfacial tension forces and the Marangoni stresses as the results of the interface interactions between different phases are described by a conception of CSF. In this model, the sharp interfaces between different phases are separated by a narrow transition layers, and the kinetics and morphology evolution of phase separation would be characterized by an order parameter visa Ca…
The recently introduced consistent lattice Boltzmann model with energy conservation [S. Ansumali, I.V. Karlin, Phys. Rev. Lett. 95, 260605 (2005)] is extended to the simulation of thermal flows on standard lattices. The two-dimensional thermal model on the standard square lattice with nine velocities is developed and validated in the thermal Couette and Rayleigh-Bénard natural convection problems.
In this paper, a boundary scheme is proposed for the two-dimensional five-velocity (D2Q5) lattice Boltzmann method with heterogeneous surface reaction, in which the unknown distribution function is determined locally based on the kinetic flux of the incident particles. Compared with previous boundary schemes, the proposed scheme has a clear physical picture that reflects the consumption and production in the reaction. Furthermore, the scheme only involves local information of boundary nodes such that it can be easily applied to complex geometric structures. In order to validate the accuracy of…
In this paper, a lattice Boltzmann (LB) model with double distribution functions is proposed for two-phase flow in porous media where one distribution function is used for pressure governed by the Poisson equation, and the other is applied for saturation evolution described by the convection-diffusion equation with a source term. We first performed a Chapman-Enskog analysis, and show that the macroscopic nonlinear equations for pressure and saturation can be recovered correctly from present LB model. Then in the framework of LB method, we develop a local scheme for pressure gradient or equival…
In this paper, a multiple-relaxation-time lattice Boltzmann model with an off-diagonal collision matrix was adopted to predict the effective thermal conductivities of the anisotropic heterogeneous materials whose components are also anisotropic. The half lattice division scheme was adopted to deal with the internal boundaries to guarantee the heat flux continuity at the interfaces. Accuracy of the model was confirmed by comparisons with benchmark results and existing simulation data. The present method was then adopted to numerically predict the transverse and longitudinal effective thermal co…
Fluid motion driven by thermal effects, such as that due to buoyancy in differentially heated three-dimensional (3D) enclosures, arise in several natural settings and engineering applications. It is represented by the solutions of the Navier-Stokes equations (NSE) in conjunction with the thermal energy transport equation represented as a convection-diffusion equation (CDE) for the temperature field. In this study, we develop new 3D lattice Boltzmann (LB) methods based on central moments and using multiple relaxation times for the three-dimensional, fifteen velocity (D3Q15) lattice, as well as …
The discrete effect on the boundary condition has been a fundamental topic for the lattice Boltzmann method in simulating heat and mass transfer problems. In previous works based on the halfway anti-bounce-back (ABB) boundary condition for convection-diffusion equations (CDEs), it is reported that the discrete effect cannot be commonly removed in the Bhatnagar-Gross-Krook (BGK) model except for a special value of relaxation time. Targeting this point in the present paper, we still proceed within the framework of BGK model for two-dimensional CDEs, and analyze the discrete effect on a non-halfw…
In this brief report, a thermal lattice-Boltzmann (LB) model is presented for axisymmetric thermal flows in the incompressible limit. The model is based on the double-distribution-function LB method, which has attracted much attention since its emergence for its excellent numerical stability. Compared with the existing axisymmetric thermal LB models, the present model is simpler and retains the inherent features of the standard LB method. Numerical simulations are carried out for the thermally developing laminar flows in circular ducts and the natural convection in an annulus between two coaxi…
In this paper, we present TLBfind, a GPU code for simulating the hydrodynamics of droplets along with a dynamic temperature field. TLBfind hinges on a two-dimensional multi-component lattice Boltzmann (LB) model simulating a concentrated emulsion with finite-size droplets evolving in a thermal convective state, just above the transition from conduction to convection. The droplet concentration of the emulsion system is tenable, and at the core of the code lies the possibility to measure a large number of physical observables characterising the flow and droplets. Furthermore, TLBfind includes a …
We present a new 3D lattice Boltzmann (LB) algorithm based on central moments for the D3Q27 lattice using a cuboid grid, which is parameterized by two grid aspect ratios that are related to the ratios of the particle speeds with respect to that along a reference coordinate direction. The use of the cuboid lattice grid enables the method to compute flows having different characteristic length scales in different directions more efficiently. It is constructed to simulate the Navier-Stokes equations consistently via introducing counteracting corrections to the second order moment equilibria obtai…
In this paper, a thermal cascaded lattice Boltzmann method (TCLBM) is developed in combination with the double-distribution-function (DDF) approach. A density distribution function relaxed by the cascaded scheme is employed to solve the flow field, and a total energy distribution function relaxed by the BGK scheme is used to solve temperature field, where two distribution functions are coupled naturally. The forcing terms are incorporated by means of central moments, which is consistent with the previous force scheme [Premnath \emph{et al.}, Phys. Rev. E \textbf{80}, 036702 (2009)] but the der…
A highly efficient three-dimensional (3D) Lattice Boltzmann (LB) model for high speed compressible flows is proposed. This model is developed from the original one by Kataoka and Tsutahara[Phys. Rev. E 69, 056702 (2004)]. The convection term is discretized by the Non-oscillatory, containing No free parameters and Dissipative (NND) scheme, which effectively damps oscillations at discontinuities. To be more consistent with the kinetic theory of viscosity and to further improve the numerical stability, an additional dissipation term is introduced. Model parameters are chosen in such a way that th…
