受限空间中纳米结构表面冷凝过程的分子动力学模拟
Molecular Dynamics Simulation of Condensation on Nanostructured Surface in a Confined Space
摘要:
了解纳米尺度下相变传热特性和强化热能传输具有重要的理论意义和实际应用价值。本研究采用分子动力学模拟研究了纳米尺度下的蒸发和冷凝过程。通过在底部和顶部端部放置热壁和冷壁并在两个壁之间填充工作流体来模拟长方体系统。通过设置两个不同的高温热壁,我们显示了正常和爆炸汽化及其对热输运的影响。对于冷壁,构建了高度固定、长度可变、宽度为4 ~ 20层、间隔为4层的长方体纳米结构,研究了不同纳米结构诱导冷凝的效果。对于汽化,结果表明,较高的热壁温度导致更快的工作流体作为一个集群从热壁移动到冷壁的传输。然而,过高的热壁温度会引起爆炸沸腾,由于工质相变较小,不利于热量的传递。对于冷凝,结果表明,纳米结构促进冷凝,这不仅可以通过增加的表面积,而且还可以通过纳米结构的表面和冷端之间的距离来影响。存在一个最佳的纳米结构方案,使整个系统的相变速率最大化。
英文摘要:
Understanding heat transfer characteristics of phase change and enhancing thermal energy transport in nanoscale are of great interest in both theoretical and practical applications. In the present study, we investigated the nanoscale vaporization and condensation by using molecular dynamics simulation. A cuboid system is modeled by placing hot and cold walls in the bottom and top ends and filling with working fluid between the two walls. By setting two different high temperatures for the hot wall, we showed the normal and explosive vaporizations and their impacts on thermal transport. For the cold wall, the cuboid nanostructures with fixed height, varied length, width ranging from 4 to 20 layers, and an interval of 4 layers are constructed to study the effects of condensation induced by different nanostructures. For vaporization, the results showed that higher temperature of the hot wall led to faster transport of the working fluid as a cluster moving from the hot wall to the cold wall. However, excessive temperature of the hot wall causes explosive boiling, which seems not good for the transport of heat due to the less phase change of working fluid. For condensation, the results indicate that nanostructure facilitates condensation, which could be affected not only by the increased surface area but also by the distances between surfaces of the nanostructures and the cold end. There is an optimal nanosctructure scheme which maximizes the phase change rate of the entire system.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。