通过纳米槽针的液体分配和写入
Liquid dispensing and writing by a nano-grooved pin
摘要:
在极小尺寸范围内的液体分配和写入对于许多当前技术中的应用是重要的,例如微/纳米制造、生物/化学图案化和分析以及药物发现。当前的大多数分配/写入方法都可以归类为一类液体流过微小的管道或喷嘴,需要输入脉冲能量,这导致程序复杂、设备昂贵和材料适用性窄,尤其是对于生物材料。在这里,我们报告了一种可能导致新类别的方法:液体流过表面上具有纵向纳米凹槽的针的锥形表面,以不间断地执行液滴分配和直接写入。分配的液滴直径是可控的,从几微米到150 nm,和写入线高度低至5 nm。揭示了液体在锥形表面上的自动存储和通过纳米沟槽的自发输运的机制,并通过一个简单的关系很好地模拟。此外,与纳米级管和喷嘴相比,纳米凹槽销在制造上简单得多且便宜得多,并且销具有对于管和喷嘴通常麻烦的更低的堵塞问题。我们的新战略可能构成创建液体分配/书写技术的基础,这些技术同时更小,更简单,更快,适用于更多类型的材料。
英文摘要:
Liquid dispensing and writing in the extremely small size regime are important for applications in many current technologies, such as micro/nano fabrication, biological/chemical patterning and analysis, and drug discovery. Most of current dispensing/writing methods can be sorted into a category of liquid flowing through tiny tubes or nozzles that requires inputting an impulse energy, which leads to complex procedures, expensive equipment and narrow material applicability, especially for biomaterials. Here, we report a method that may lead to a new category: liquid flows over the tapered surface of a pin with longitudinal nano grooves on the surface to uninterruptedly perform droplet dispensing and direct writing. The dispensed droplet diameters were controllable from several microns down to 150 nm, and the written line heights were as low as 5 nm. The mechanism underlying automatic liquid storage on conical surface and spontaneous liquid transport through nano grooves is revealed and well modeled by a simple relationship. Furthermore, the nano-grooved pins are much simpler and cheaper in fabrication than nanoscale tubes and nozzles, and pins have much depressed clogging problems that are typically troublesome for tubes and nozzles. Our new strategy may constitute a basis for creating liquid dispensing/writing technologies that are simultaneously smaller, simpler, faster and applicable for more types of materials.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。