When a droplet containing a non-volatile component is dried on a substrate, it leaves a ringlike deposit on the substrate. We propose a theory which predicts the deposit distribution based on a model of fluid flow and contact line motion of the droplet. It is shown that the deposition pattern changes continuously from coffee-ring to volcano-like and to mountain-like depending on the mobility of the contact line and the evaporation rate. Analytical expression is given for the peak position of the distribution of deposit left on the substrate.
The deposition process at the edge of evaporating colloidal drops varies with the shape of suspended particles. Experiments with prolate ellipsoidal particles suggest that the spatiotemporal properties of the deposit depend strongly on particle aspect ratio. As the aspect ratio increases, the particles form less densely-packed deposits and the statistical behavior of the deposit interface crosses over from the Kardar-Parisi-Zhang (KPZ) universality class to another universality class which was suggested to be consistent with the KPZ plus quenched disorder. Here, we numerically study the effect…
The deposition of particles on a substrate by drying a colloidal suspension droplet is at the core of applications ranging from traditional printing on paper to printable electronics or photovoltaic devices. The self-pinning induced by the accumulation of particles at the contact line plays an important role in the formation of the deposition. In this paper, we investigate both numerically and theoretically, the effect of friction between the particles and the substrate on the deposition pattern. Without friction, the contact line shows a stick-slip behaviour and a dot-like deposit is left aft…
We propose a theory for the multi-ring pattern of the deposits that are formed when droplets of suspension are dried on a substrate. Assuming a standard model for the stick-slip motion of the contact line, we show that as droplets evaporate, many concentric rings of deposits are formed, but are taken over by a solid-circle pattern in the final stage of drying. An analytical expression is given to indicate when ring-pattern changes to solid-circle pattern during an evaporation process. The results are in qualitative agreement with existing experiments, and the other predictions on how the evapo…
The fracture mechanics was widely employed to explain the crack propagation in the deposition produced by drying colloidal suspension. However, more complex than conventional fracture, those cracks periodically distribute and make up a unique pattern. This still remains mysterious so far. Inspired by the concept of spinodal decomposition, here, we develop the theory to elucidate the spatial arrangement of the cracks, which indicates that the crack pattern is generated by the phase separation of colloidal clusters and water. It concludes that the crack spacing results from the wavelength of the…
Drying colloidal droplets have a wide range of applications from medical diagnostics to coatings for industries. This paper explores the effects of the substrate temperature (ranging from $25$ to $55 ^{\circ}$C) and various initial concentrations ($ϕ$) of $1$ to $20$ wt% of lysozyme in an aqueous solution on its drying and final dried film state using bright-field optical microscopy. The $ϕ$ is divided into three regimes, ultra-concentrated ($20$ $<$ $ϕ$ $\leq$ $17$ wt%), concentrated ($17$ $<$ $ϕ$ $\leq$ $9$ wt%) and diluted ($9$ $<$ $ϕ$ $\leq$ $1$ wt%). Increasing $ϕ$ in these regimes finds …
We report results of a detailed experimental investigation into the drying of sessile droplets of aqueous poly(ethylene oxide) (PEO) polymer solutions under various experimental conditions. Samples are prepared with a range of initial concentrations c_0 and are filtered to remove traces of undissolved PEO clusters. In typical experiments, droplets with initial volumes between 5\muL and 50\muL are left to evaporate while temperature and relative humidity are monitored. Droplets either form a disk-like solid "puddle" or a tall conical "pillar". The droplet mass is monitored using a microbalance …
The theory of solute transfer and deposit growth in evaporating sessile drops on a plane substrate is presented. The main ideas and the principal equations are formulated. The problem is solved analytically for two important geometries: round drops (drops with circular boundary) and pointed drops (drops with angular boundary). The surface shape, the evaporation rate, the flow field, and the mass of the solute deposited at the drop perimeter are obtained as functions of the drying time and the drop geometry. In addition, a model accounting for the spatial extent of the deposit arising from the …
Self-assembled filament layers in drying sessile droplets: from morphology to electrical conductivity
Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IET-2), Forschungszentrum Jülich（于利希研究中心埃尔朗根-纽伦堡亥姆霍兹可再生能源研究所）；Friedrich-Alexander-Universität Erlangen-Nürnberg（埃尔朗根-纽伦堡弗里德里希·阿列克桑德大学）
Drying suspensions often leave behind complex patterns of particulates, as might be seen in the coffee stains on a table. Here we consider the dynamics of periodic band or uniform solid film formation on a vertical plate suspended partially in a drying colloidal solution. Direct observations allow us to visualize the dynamics of the band and film deposition, and the transition in between when the colloidal concentration is varied. A minimal theory of the liquid meniscus motion along the plate reveals the dynamics of the banding and its transition to the filming as a function of the ratio of de…
How particles are deposited at the edge of evaporating droplets, i.e. the {\em coffee ring} effect, plays a crucial role in phenomena as diverse as thin-film deposition, self-assembly, and biofilm formation. Recently, microorganisms have been shown to passively exploit and alter these deposition dynamics to increase their survival chances under harshening conditions. Here, we show that, as the droplet evaporation rate slows down, bacterial mobility starts playing a major role in determining the growth dynamics of the edge of drying droplets. Such motility-induced dynamics can influence several…
The present article highlights an approach to generate contrasting patterns from drying droplets in a liquid bridge configuration, different from well-known coffee rings. Reduction of the confinement distance (the gap between the solid surfaces) leads to systematized nano-particle agglomeration yielding to spokes-like patterns similar to those found on scallop shells instead of circumferential edge deposition. Alteration of the confinement length modulates the curvature that entails variations in the evaporation flux across the liquid-vapor interface. Consequently, flow inside different liquid…
A model accounting for finite spatial dimensions of the deposit patterns in the evaporating sessile drops of colloidal solution on a plane substrate is proposed. The model is based on the assumption that the solute particles occupy finite volume and hence these dimensions are of the steric origin. Within this model, the geometrical characteristics of the deposition patterns are found as functions of the initial concentration of the solute, the initial geometry of the drop, and the time elapsed from the beginning of the drying process. The model is solved analytically for small initial concentr…
We consider contact line deposition and pattern formation of a pinned evaporating thin drop. We identify and focus on the transport dynamics truncated by the maximal concentration, proposed by Dupont, as the single deposition mechanism. The truncated process, formalized as "pipe models", admits a characteristic moving shock front solution that has a robust functional form and depends only on local conditions. By applying the models, we solve the deposition process and describe the deposit density profile in different asymptotic regimes. In particular, near the contact line the density profile …
Sessile droplets of aqueous poly(ethylene oxide) solution, with average molecular weight of 100 kDa, are monitored during evaporative drying at ambient conditions over a range of initial concentrations $c_0$. For all droplets with $c_0 \geq 3%$, central conical structures, which can be hollow and nearly 50% taller than the initial droplet, are formed during a growth stage. Although the formation of superficially similar structures has been explained for glass-forming polymers using a skin-buckling model which predicts the droplet to have constant surface area during the growth stage (L. Paucha…
Nanofluids hold promise for a wide range of areas of industry. However, understanding of wetting behavior and deposition formation in course of drying and spreading of nanofluids, particularly containing surfactants, is still poor. In this paper, the evaporation dynamics of quantum dot-based nanofluids and evaporation-driven self-assembly in nanocolloidal suspensions on hexamethyldisilazane-, polystyrene-, and polypropylene-coated hydrophobic surfaces have been studied experimentally. Moreover, for the very first time, we make a step to understanding of wetting dynamics of superspreader surfac…
Evaporating suspensions of colloidal particles lead to the formation of a variety of patterns, ranging from a left-over ring of a dried coffee drop to uniformly distributed solid pigments left behind wet paint. To characterize the transition between single rings, multiple concentric rings, broad bands, and uniform deposits, we investigate the dynamics of a drying droplet via a multiphase model of colloidal particles in a solvent. Our theory couples the inhomogeneous evaporation at the evolving droplet interface to the dynamics inside the drop, i.e. the liquid flow, local variations of the part…
The work is devoted to particles dynamics simulation in a colloidal drop, when it dries on a substrate and the triple-phase boundary is fixed. Experimental observations [Deegan R. D. et. al., 2000] show a ring deposition on a solid substrate after full droplet desiccation. This phenomenon of macrolevel is known as coffee ring effect. There are other experiments that show a co-effect at the microlevel. We are talking about the formation of a quasicrystalline structure on the outer part of the ring and occurrence amorphous inner zone of ring [Mar\'ın Á. G. et. al., 2011]. The goal of this work i…
When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while maintaining the drying process. However, substitution of evaporation by absorption into the substrate of the solvent has been investigated less. Here, we show that a droplet containing colloidal partic…
To evaluate the role of common substrates in the transmission of respiratory viruses, uniformly distributed microdroplets of artificial saliva were generated using an advanced inkjet printing technology to replicate the aerosol droplets, and subsequently deposited on five substrates, including glass, PTFE, stainless steel, ABS, and melamine. The droplets were found to evaporate within a short timeframe, which is consistent with previous reports concerning the drying kinetics of picolitre droplets. Using fluorescence microscopy and atomic force microscopy, we found that the surface deposited mi…
Evaporation-Driven Nanowire Self-Assembly in an Elongated Droplet
Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IET-2), Forschungszentrum Jülich（于利希研究中心埃尔朗根-纽伦堡亥姆霍兹可再生能源研究所）；Friedrich-Alexander-Universität Erlangen-Nürnberg（埃尔朗根-纽伦堡弗里德里希·亚历山大大学）
Liquid droplets usually wet smooth and homogeneous substrates isotropically. Recent research works have revealed that droplets sit, slide and spread anisotropically on uniaxially stretched soft substrates, showing an enhanced wettability and contact line mobility along the stretching direction. This phenomenon arises from the anisotropic deformation of the substrate below the contact line. Here, we investigate how the stretching of soft substrates affects droplets drying. We observe that water droplet evaporates with an elongated non-circular contact line on the stretched substrates and switch…
