arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1507.08082eess.SYcs.SY
收藏

动脉网络的PointQ模型:校准与实验

PointQ model of an arterial network: calibration and experiments

Fatma Yildiz Tascikaraoglu, Jennie Lioris, Ajith Muralidharan, Martin Gouy, Pravin Varaiya

AI总结:

本文提出通过二次规划问题校准动脉网络PointQ模型,利用流量、入口需求和交叉口转向运动进行模拟,并通过实验验证模型可靠性及不同控制策略下的交通影响。

摘要:

动脉微模拟模型PointQ的校准被表述为一个二次规划问题(QP),其决策变量为链路流量、入口链路需求和交叉口转向运动,受由流量守恒身份和部分链路流量(计数)现场测量施加的线性约束。二次目标函数是决策变量与测量值的偏差。QP的解提供了所有未测量变量的估计,从而得到完全指定的模拟模型。该模拟模型的运行可以与其他现场测量(如路线上的旅行时间)进行比较,以判断校准模型的可靠性。在洛杉矶靠近I-210的Huntington-Colorado动脉路段(包含73个链路和16个交叉口)用于说明该过程。进行了两项实验以确定从I-210高速公路转移到动脉网络的最大交通量,有无允许改变定时计划。两种情况下的最大分流通过求解线性规划问题获得。第三项实验比较了现有固定时间控制与最大压力控制的延误和旅行时间。第四项实验比较了两种PointQ模型:在第一种模型中,高速公路交通遵循预指定的路线,而背景交通根据转向比率移动;在第二种模型中,转向比率在单商品模型中被修改以匹配链路流量。所需显著修改的转向比率表明,在CTM模型中频繁使用的单商品模型可能具有误导性...

英文摘要:

The calibration of a PointQ arterial microsimulation model is formulated as a quadratic programming problem (QP) whose decision variables are link flows, demands at entry links, and turn movements at intersections, subject to linear constraints imposed by flow conservation identities and field measurements of a subset of link flows (counts), demands and turn ratios. The quadratic objective function is the deviation of the decision variables from their measured values. The solution to the QP gives estimates of all unmeasured variables and thus yields a fully specified simulation model. Runs of this simulation model can then be compared with other field measurements, such as travel times along routes, to judge the reliability of the calibrated model. A section of the Huntington-Colorado arterial near I-210 in Los Angeles comprising 73 links and 16 intersections is used to illustrate the procedure. Two experiments are conducted with the calibrated model to determine the maximum traffic that can be diverted from the I-210 freeway to the arterial network, with and without permitting changes in the timing plans. The maximum diversion in both cases is obtained by solving a linear programming problem. A third experiment compares the delay and travel time using the existing fixed time control and a max pressure control. The fourth experiment compares two PointQ models: in the first model the freeway traffic follows a pre-specified route while the background traffic moves according to turn ratios, and in the second model turn ratios are modified in a single commodity model to match the link flows. The substantial modification of the turn ratios needed suggests that the use of a single-commodity model as frequently done in CTM models can be misleading...

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑