The effect of an external pressure disturbance, being displaced with a constant speed along the free surface of a viscous thin film, is studied theoretically in the lubrication approximation in one- and two-dimensional geometries. In the comoving frame, the imposed pressure field creates a stationary deformation of the interface - a wake - that spatially vanishes in the far region. The shape of the wake and the way it vanishes depend on both the speed and size of the external source and the properties of the film. The wave resistance, namely the force that has to be externally furnished in order to maintain the wake, is analysed in details. For finite-size pressure disturbances, it increases with the speed, up to a certain transition value above which a monotonic decrease occurs. The role of the horizontal extent of the pressure field is studied as well, revealing that for a smaller disturbance the latter transition occurs at higher speed. Eventually, for a Dirac pressure source, the wave resistance either saturates in a 1D geometry, or diverges in a 2D geometry.
Numerical validation and physical explanation of the universal force theory of three-dimensional steady viscous and compressible flow
在最近的一篇论文中,Liu et al. [``Lift and drag in three-dimensional steady viscous and compressable flow '',Phys. Fluids 29,116105(2017)]获得了一个通用的理论,用于三维稳定流中物体上的气动力,从不可压缩一直到超音速状态都有效。在该理论中,总气动力可以仅由定常线性远场中单个尾迹面上的涡量分布来确定。尽管这一结果至关重要,但其有效性和在实践中的表现尚未得到研究。本文对三维机翼的亚音速、跨音速和超音速流动进行了雷诺平均纳维尔-斯托克斯数值模拟。由万有力理论得到的气动力与由标准壁面应力积分得到的气动力进行了比较。这两个公式之间的协议首次证实了理论的有效性在三维定常粘性和可压缩流。普适公式的良好性能主要是由于尾流中的湍流粘度远大于其中的分子粘度,这可以显著减小定常线性远场到物体的距离。为了进一步验证理论的正确性,将理论计算结果与数值模拟结果进行了比较。通过识别尾流中不同的涡量源来解释与理论的普遍性相关的基本物理。
流体-结构相互作用在自然界和技术中无处不在。然而,系统往往是如此复杂,数值模拟或特设的假设,必须用来深入了解流体和固体力学之间的复杂相互作用的细节。在本文中,我们提出了一个简单的仿生软阀,说明在低雷诺数的流体动力和弹性力之间的相互作用的基本特征的粘性流的实验和理论。该装置包括连接到位于锥形圆柱形通道内的弹簧的球体。弹簧与通道的中心轴线对齐,并且在球体上施加压降,从而迫使液体通过球体和通道壁之间的狭窄间隙。球体的平衡位置由弹簧力和流体动力之间的平衡决定。由于间隙厚度随球体位置而变化,因此系统具有压力相关的液压阻力。这导致施加的压力和流速之间的非线性关系:流量最初随压力增加,但当压力超过某个临界值时随着间隙关闭而减小。为了使这些观察合理化,我们提出了一个数学模型,将流动的复杂性降低到二维润滑近似。得到了压降/流速的封闭式表达式,该表达式揭示了流速$Q$取决于压降$Δp$、球体半径$a$、间隙厚度$h_0$和粘度$η$,公式为$Q\sim η^{-1} a^{1/2}h_0^{5/2}\left(Δp_c-Δp\right)^{5/2}Δp$,其中临界压力$Δp_c$与弹性常数$k$和球体半径$a$成比例,公式为$Δp_c\sim k a^{-2}$。这些预测与我们没有自由参数的实验结果相比是有利的。
Fundamental thermo-visco mechanical interactions governing the acoustic response of laser-excited nanoparticles
CNRS, Centrale Lille, Univ. Polytechnique Hauts-de-France, UMR 8520 -IEMN- Institut d’Électronique de Microélectronique et de Nanotechnologie, University of Lille(法国国家科学研究中心、里尔中央理工学院、上法兰西理工大学、电子学与微纳米技术研究所);Institute of Industrial Science, The University of Tokyo(东京大学工业科学研究所);Université Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, UMR5306(里昂第一大学、法国国家科学研究中心、光物质研究所);Department of Mechanical, Chemical and Materials Engineering, Università degli Studi di Cagliari(卡利亚里大学机械、化学与材料工程系)