arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1507.00485cond-mat.softcond-mat.mtrl-sci
收藏

磁响应PDMS,带有对齐的镀镍碳纤维

Magnetically Responsive PDMS with aligned nickel coated carbon fibres

David C. Stanier, Jacopo Ciambella, Sameer S. Rahatekar

摘要:

我们详细介绍了一种技术,以生产能够承受大的应变和响应外部磁场的致动器。使用的材料是用镀镍碳纤维增强的PDMS。由于镍的功能化作用,可以通过将粘性溶液嵌入低外部磁场($<0.2$ ~T)中来实现纤维取向。它示出的机械和磁性能可以通过定制的材料各向异性,通过适当地定向在预固化阶段的增强纤维进行控制。大应变行为进行了研究,通过拉伸试验高达60%的变形,并显示出强烈的依赖于纤维取向。将梁状样品置于均匀磁场中,研究了其磁性能。结果表明,从0 $^\circ$纤维试样的仅弯曲变形配置过渡到90 $^\circ$纤维实现的仅扭转配置的多稳态行为,而所有的中间角都显示弯曲和扭转。这种行为是准确地捕获的大旋转梁模型介绍。这种致动器可用于需要快速响应时间和大应变的所有应用中。

英文摘要:

We detail a technique to produce actuators able to bear large strain and respond to an external magnetic field. The material used is PDMS reinforced with nickel coated carbon fibres. Thanks to the nickel functionalisation, the fibre orientation can be achieved by embedding the viscous solution into a low external magnetic field ($<0.2$~T). It is shown that both mechanical and magnetic properties can be controlled by tailoring the material anisotropy through properly orientating the reinforcing fibres in the pre-curing phase. The large strain behaviour is investigated by tensile testing up to 60 % of deformation and shows a strong dependence on the fibre orientation. The magnetic properties are investigated by placing beam-like specimens into a uniform magnetic field. The results show a multistable behaviour with a transition from a bending-only deformed configuration for the 0$^\circ$ fibres specimen, to a twisting only configuration, achieved for fibres at 90$^\circ$ whereas all the intermediate angles show both bending and twisting. This behaviour is accurately captured by the large rotations beam model introduced. Such an actuator can be used in all applications which require fast response times and large strain.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑