在J-PARC TREK/E36实验的阈值切伦科夫计数器中制备$n$ = 1.08的二氧化硅气凝胶用于$e^+/μ^+$分离
Fabrication of silica aerogel with $n$ = 1.08 for $e^+/μ^+$ separation in a threshold Cherenkov counter of the J-PARC TREK/E36 experiment
摘要:
本研究提出了疏水二氧化硅气凝胶作为辐射器在阈值型切伦科夫计数器的发展。这些计数器将用于分离J-PARC TREK/E36实验中K介子衰变产生的正电子和正μ子。我们选择使用折射率为1.08的气凝胶来识别动量约为240 MeV/ $c$的带电粒子,并且辐射体块形状设计为梯形横截面以适合TREK/E36探测器系统中心的K介子停止目标周围的桶区域。包括备件在内,我们获得了30个无裂纹气凝胶块,分为两层,每层厚度为2 cm,长度为18 cm,以填充12个计数器模块。光学测量表明,生产的气凝胶砖具有所需的折射率和透明度。
英文摘要:
This study presents the development of hydrophobic silica aerogel for use as a radiator in threshold-type Cherenkov counters. These counters are to be used for separating positrons and positive muons produced by kaon decay in the J-PARC TREK/E36 experiment. We chose to employ aerogel with a refractive index of 1.08 to identify charged particles with momenta of approximately 240 MeV/$c$, and the radiator block shape was designed with a trapezoidal cross-section to fit the barrel region surrounding the kaon stopping target in the center of the TREK/E36 detector system. Including spares, we obtained 30 crack-free aerogel blocks segmented into two layers, each layer having a thickness of 2 cm and a length of 18 cm, to fill 12 counter modules. Optical measurements showed that the produced aerogel tiles had the required refractive indices and transparency.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。