SANAEM RFQ加速器混合电源及RF传输线的研制
Development of a Hybrid Power Supply and RF Transmission Line for SANAEM RFQ Accelerator
摘要:
SANAEM Project Prometheus(SPP)一直在建造MeV范围的质子束线。它的质子源、两个中子源和一个低能诊断盒已经制造和安装。这些将是其次是一个4-叶片涡轮机将由两个阶段的PSU供电。第一级是一个定制的固态放大器,在352.2 MHz的工作频率下提供6 kW的功率。第二级采用Thales的TH 595四极管,将在短脉冲模式下将此输入放大到160 kW。将通过多个WR 2300全高和半高波导、3 1/8”刚性同轴电缆、适当的适配器和转换器以及定制设计的环行器连接,实现向太阳能电池板的电力传输。本文总结了这些部件在设计和生产过程中取得的经验。
英文摘要:
SANAEM Project Prometheus (SPP) has been building a proton beamline at MeV range. Its proton source, two solenoids, and a low energy diagnostic box have been already manufactured and installed. These are going to be followed by a 4-vane RFQ to be powered by two stage PSU. The first stage is a custom-built solid state amplifier providing 6 kW at 352.2 MHz operating frequency. The second stage, employing TH 595 tetrodes from Thales, will amplify this input to 160 kW in a short pulsed mode. The power transfer to the RFQ will be achieved by the means of a number of WR2300 full and half height waveguides, 3 1/8" rigid coaxial cables, joined by appropriate adapters and converters and by a custom design circulator. This paper summarizes the experience acquired during the design and the production of these components.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。