二维导电平面结构建模中的点接触
Point Contacts in Modeling Conducting 2D Planar Structures
摘要:
使用优化算法来改善天线和电磁结构的性能通常会导致平面形状异常。使用矩形导电元件,所提出的结构有时在两个相邻区域之间仅具有一个公共点的连接。单点连接(点交叉)会影响结构的电磁性能。在这封信中,我们说明了使用矩量法,时域有限差分法和有限元求解器的偶极和环形天线上的点交叉的影响。不同结的电流分布、辐射方向图和阻抗特性是不同的。这些解算器在交叉点的建模中不一致,这是关于使用此类交叉点的不确定性的警告。然而,求解者一致认为,结的微小变化会显著改变天线性能。我们建议,应该考虑桥接和倒角的冲突细胞,以找到优化的结构。这减少了40%的仿真时间使用FDTD建模,但没有显着减少使用矩量法和有限元方法。
英文摘要:
Use of an optimization algorithm to improve performance of antennas and electromagnetic structures usually ends up in planar unusual shapes. Using rectangular conducting elements the proposed structures sometimes have connections with only one single point in common between two neighboring areas. The single point connections (point crossing) can affect the electromagnetic performance of the structure. In this letter, we illustrate the influence of point crossing on dipole and loop antennas using MoM, FDTD, and FEM solvers. Current distribution, radiation pattern, and impedance properties for different junctions are different. These solvers do not agree in the modeling of the point crossing junctions which is a warning about uncertainty in using such junctions. However, solvers agree that a negligible change in the junction would significantly change the antenna performance. We propose that one should consider both bridging and chamfering of the conflicting cells to find optimized structures. This reduces the simulation time by 40% using FDTD modeling, however no significant reduction is obtained using the MoM and FEM methods.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。