The magnetized Iron CALorimeter detector (ICAL) which is proposed to be built in the India-based Neutrino Observatory (INO) laboratory, aims to study atmospheric neutrino oscillations primarily through charged current interactions of muon neutrinos and anti-neutrinos with the detector. The response of muons and charge identification efficiency, angle and energy resolution as a function of muon momentum and direction are studied from GEANT4-based simulations in the peripheral regions of the detector. This completes the characterisation of ICAL with respect to muons over the entire detector and has implications for the sensitivity of ICAL to the oscillation parameters and mass hierarchy compared to the studies where only the resolutions and efficiencies of the central region of ICAL were assumed for the entire detector.
Selection criteria for track reconstruction in the peripheral region of the detector were determined from the detector response. On applying these, for the 1--20 GeV energy region of interest for mass hierarchy studies, an average angle-dependent momentum resolution of 15--24%, reconstruction efficiency of about 60--70% and a correct charge identification of about 97% of the reconstructed muons were obtained. In addition, muon response at higher energies upto 50 GeV was studied as relevant for understanding the response to so-called rock muons and cosmic ray muons. An angular resolution of better than a degree for muon energies greater than 4 GeV was obtained in the peripheral regions, which is the same as that in the central region.
The magnetised Iron CALorimeter detector (ICAL), proposed to be built at the India-based Neutrino Observatory (INO), is designed to study atmospheric neutrino oscillations. The ICAL detector is optimized to measure the muon momentum, its direction and charge. A GEANT4-based package has been developed by the INO collaboration to simulate the ICAL geometry and propagation of particles through the detector. The simulated muon tracks are reconstructed using the Kalman Filter algorithm. Here we present the first study of the response of the ICAL detector to muons using this simulations package to d…
A Kalman filter package has been developed for reconstructing muon ($μ^\pm$) tracks (coming from the neutrino interactions) in ICAL detector. Here, we describe the algorithm of muon track fitting, with emphasis on the error propagation of the elements of Kalman state vector along the muon trajectory through dense materials and inhomogeneous magnetic field. The higher order correction terms are included for reconstructing muon tracks at large zenith angle $θ$ (measured from the perpendicular to the detector planes). The performances of this algorithm and its limitations are discussed.
The results of a Monte Carlo simulation study of the hadron energy response for the magnetized Iron CALorimeter detector, ICAL, proposed to be located at the India-based Neutrino Observatory (INO) is presented. Using a GEANT4 modeling of the detector ICAL, interactions of atmospheric neutrinos with target nuclei are simulated. The detector response to hadrons propagating through it is investigated using the hadron hit multiplicity in the active detector elements. The detector response to charged pions of fixed energy is studied first, followed by the average response to the hadrons produced in…
The motivation for a cosmic muon veto (CMV) detector is to explore the possibility of locating the proposed large Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) at a shallow depth. An initial effort in that direction, through the assembly and testing of a $\sim$ 1 m $\times$ 1 m $\times$ 0.3 m plastic scintillator based detector, is described. The plan for making a CMV detector for a smaller prototype mini-ICAL is also outlined.
The Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) is planned to be set up in an underground cavern with a rock overburden of more than 1 km. This overburden reduces the cosmic muon flux by a factor of 10$^{6}$ with respect to that at sea level. In this paper, we examine the possibility of a 100 m shallow depth ICAL (SICAL) detector. The cosmic muons would have to be detected in a veto detector surrounding ICAL with an efficiency of 99.99 % in order to have the same level of muon background leaking undetected through the veto detector as at the 1 km depth underg…
The proposed magnetised Iron CALorimeter detector (ICAL) to be built in the India-based Neutrino Observatory (INO) laboratory aims to detect atmospheric muon neutrinos. In order to achieve improved physics results, the constituent components of the detector must be fully understood by proper characterisation and optimisation of various parameters. Resistive Plate Chambers (RPCs) are the active detector elements in the ICAL detector and can be made of glass or bakelite. The number of RPCs required for this detector are very large so a detailed study is necessary to establish the characterisatio…
India-based Neutrino Observatory (INO) facility is going to have a 50 kton magnetized Iron CALorimeter (ICAL) detector for precision measurements of neutrino oscillations using atmospheric neutrinos. The proposed ICAL detector will be a stack of magnetized iron plates (acting as target material) interleaved with glass Resistive Plate Chambers (RPCs) as the active detector elements. An RPC is a gaseous detector made up of two parallel electrode plates having high bulk resistivity like that of float glass and bakelite. For the ICAL detector, glass is preferred over bakelite as it does not need a…
The India-based Neutrino Observatory (INO) is planning to build a magnetized iron calorimeter detector (ICAL) in which Resistive Plate Chambers (RPCs) will be the active detector elements. A study of the performance of RPCs, made using electrodes of various thicknesses, is pivotal in optimizing the design parameters of the ICAL RPCs. We fabricated RPCs with glasses of various thicknesses and studied their performance in the same environmental conditions. A study of detector efficiency, noise rate, time resolution and charge distribution is presented in this paper.
India-based Neutrino Observatory (INO) is a multi-institutional facility, planned to be built up in South India. The INO facility will host a 51 kton magnetized Iron CALorimeter (ICAL) detector to study atmospheric muon neutrinos. Iron plates have been chosen as the target material whereas Resistive Plate Chambers (RPCs) have been chosen as the active detector element for the ICAL experiment. Due to the large number of RPCs needed ($\sim$ 28,000 of $2~m \times 2~m$ in size) for ICAL experiment and for the long lifetime of the experiment, it is necessary to perform a detailed $R\&D$ such that e…
India-based Neutrino Observatory (INO) is a planned neutrino experiment to be build up in southern part of India.The INO observatory will host a 51 kton Iron Calorimeter (ICAL) detector to detect atmospheric neutrinos. Resistive Plate Chamber (RPC) has been chosen as the active detector element for the ICAL experiment. The ICAL experiment will consist of about 28,000 RPC's of dimension $2~m\times 2~m$, divided into three modules. The experiment is planned to take data at least for 20 years from its start date. Due to the large number of RPC needed for ICAL experiment and the long lifetime of t…
The proposed Iron Calorimeter (ICAL) detector at Indian Neutrino Observatory(INO) will be a large (50 kt) magnetized detector located 1270 m underground at Bodi West Hills in Tamilnadu. ICAL is capable of identifying the charge of the particles. In this paper its potential for the measurement of the muon charge ratio is explored by means of a detailed simulation-based study, first using the CORSIKA code and then comparing it with an analytical model (the "pika" model). The estimated muon charge ratio is in agreement with the existing experimental observations, its measure can be extended by IN…
The Resistive Plate Chambers (RPCs) are going to be used as the active detectors in the India-based Neutrino Observatory (INO)-Iron Calorimeter (ICAL) experiment for the detection and study of atmospheric neutrinos. In this paper, an extensive study of structural and electrical properties for different kind of bakelite RPC electrodes is presented. RPCs fabricated from these electrodes are tested for their detector efficiency and noise rate. The study concludes with the variation of efficiency, leakage current and counting rate over the period of operation with different gas compositions and op…
The India-based Neutrino Observatory (INO) collaboration has chosen glass Resistive Plate Chambers (RPCs) as the active detector elements for the Iron Calorimeter (ICAL) experiment. In the present work, we study the electrical properties such as bulk resistivity and relative permittivity of the glasses from two different manufacturers and compared the performances of RPCs built using these glasses. We conclude that the glass electrodes with larger bulk resistivy and permittivity are better suited for manufacturing RPCs for the ICAL experiment, as these detectors could be operated at lower bias…
Atmospheric neutrino experiments can determine the neutrino mass hierarchy for any value of $δ_{CP}$. The Iron Calorimeter (ICAL) detector at the India-based Neutrino Observatory can distinguish between the charged current interactions of $ν_μ$ and $\barν_μ$ by determining the charge of the produced muon. Hence it is particularly well suited to determine the hierarchy. The hierarchy signature is more prominent in neutrinos with energy of a few GeV and with pathlength of a few thousand kilometers, $\textit{i.e.}$ neutrinos whose direction is not close to horizontal. We use adaptive neural netwo…
The India-based Neutrino Observatory (INO) collaboration is planning to build a massive 50kton magnetised Iron Calorimeter (ICAL) detector, to study atmospheric neutrinos and to make precision measurements of the parameters related to neutrino oscillations. Glass Resistive Plate Chambers (RPCs) of about 2m X 2m in size are going to be used as active elements for the ICAL detector. We have fabricated a large number of glass RPC prototypes of 1m X 1m in size and have studied their performance and long term stability. In the process, we have developed and produced a number of materials and compon…
The Weakly Interacting Massive Particle (WIMP) is a popular particle physics candidate for the dark matter (DM). It can annihilate and/or decay to neutrino and antineutrino pair. The proposed 50 kt Magnetized Iron CALorimeter (MagICAL) detector at the India-based Neutrino Observatory (INO) can observe these pairs over the conventional atmospheric neutrino and antineutrino fluxes. If we do not see any excess of events in ten years, then INO-Magical can place competitive limits on self-annihilation cross-section ($\langleσv\rangle$) and decay lifetime ($τ$) of dark matter at 90\% C.L.: $\langleσ…
We report on a detailed simulation study of the hadron energy resolution as a function of the thickness of the absorber plates for the proposed Iron Calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO). We compare the hadron resolutions obtained with absorber thicknesses in the range 1.5--8 cm for neutrino interactions in the energy range 2--15 GeV, which is relevant to hadron production in atmospheric neutrino interactions. We find that at lower energies, the thickness dependence of energy resolution is steeper than at higher energies, however there is a thickness-indepen…
The recently approved India-based Neutrino Observatory will use the world's largest magnet to study atmospheric muon neutrinos. The 50 kiloton Iron Calorimeter consists of iron alternating with single-gap resistive plate chambers. A uniform magnetic field of $\sim$1.5 T is produced in the iron using toroidal-shaped copper coils. Muon neutrinos interact with the iron target to produce charged muons, which are detected by the resistive plate chambers, and tracked using orthogonal pick up strips. Timing information for each layer is used to discriminate between upward and downward traveling muons…
A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detect these scintillation photons, producing electronic signals. The design goal for the cosmic muon veto efficiency of the CMV is $>$99.99\% and fake veto rate less than 10$^{-5}$. A testing system was d…
The iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) will be used to measure neutrino mass hierarchy. The magnet in the ICAL detector will be used to distinguish the {μ^-} and {μ^+} events induced by {ν_μ} and {\bar{ν_μ}}, respectively. Due to the importance of the magnet in ICAL, an electromagnetic simulation has been carried out to study the B-field distribution in iron using various designs. The simulation shows better uniformity in the portion of the iron layer between the coils, which is bounded by regions which have lesser field strength as we move to the pe…
In this paper, we study events without identifiable muon tracks in the Iron Calorimeter detector at the India-based Neutrino Observatory. Such events are dominated by high energy (E$_ν>$1 GeV) $ν_e$ charged current interactions, which have been studied only in a few experiments so far. The charged particles, produced in these neutrino interactions, give rise to a set of hits in the detector. We attempt to reconstruct the energy and the direction of the neutrino in such events. We study the energy distribution for a given pattern of hits of these events and find that the Landau distribution pro…
The proposed India-based Neutrino Observatory will host a 50 kton magnetized iron calorimeter (ICAL) with resistive plate chambers as its active detector element. Its primary focus is to study charged-current interactions of atmospheric muon neutrinos via the reconstruction of muons in the detector. We present the first study of the energy and direction reconstruction of the final state lepton and hadrons produced in charged current interactions of atmospheric electron neutrinos at ICAL and the sensitivity of these events to neutrino oscillation parameters $θ_{23}$ and $Δm_{32}^2$. However, th…
Glass based Resistive Plate Chambers (RPCs) are going to be used as an active element in the Iron Calorimeter (ICAL) experiment at the India based Neutrino Observatory (INO), which is being constructed to study atmospheric neutrinos. Though the RPC detector operational parameters are more or less finalized, the readout electronics is being developed using various technologies. The ICAL experiment will consist of about 29,000 RPC detectors of 2 m $\times$ 2 m in size with each detector having 64 readout channels both in the X and Y directions. The present study focusses on multi-channel electro…
The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we pre…
A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shifting (WLS) fibres. The WLS fibres re-emit photons of longer wavelengths and propagate those to silicon photo-multipliers (SiPMs). The SiPMs detect these photons, producing electronic signals. The CMV det…
The proposed 50 kt Iron Calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) aims to detect atmospheric muon neutrinos and antineutrinos separately in the multi-GeV range of energies and over a wide range of path lengths. While passing through the Earth, the upward-going neutrinos experience a density-dependent matter effect, which can be utilized to extract information about the internal structure of Earth. Since the Earth's matter effect modifies the neutrino oscillation patterns differently for neutrinos and antineutrinos, the capability of ICAL to distinguish $μ^-$ and…
The magnetised 51 kton Iron Calorimeter (ICAL) detector proposed to be built at INO is designed with a focus on detecting 1-20 GeV muons. The magnetic field will enable the measurement of the momentum of the $μ^-$ and $μ^+$ generated from the charge current interactions of $ν_μ$ and $\barν_μ$ separately within iron in the detector, thus permitting the determination of the neutrino mass ordering/hierarchy, among other important goals of ICAL. Hence it is important to determine the magnetic field as accurately as possible. The mini-ICAL detector is an 85-ton prototype of ICAL, which is operation…
The 50~kton Iron Calorimeter (ICAL) detector at the underground India based Neutrino Observatory (INO) will make measurements on atmospheric neutrinos. Muons produced in charged current (CC) interactions of muon neutrinos with the iron are tracked spatially and temporally through the signals that they produce in the Resistive Plate Chambers~(RPCs) that are interleaved with iron layers. Since the RPCs will be operated in the avalanche mode the signal rise-time is $\sim~1~\rm{nsec}$ resulting in a fast time response. While the muon track is derived from the X and Y hit information of the RPCs an…
The Iron Calorimeter (ICAL) detector at the proposed India-based Neutrino Observatory (INO) aims to detect atmospheric neutrinos and antineutrinos separately in the multi-GeV range of energies and over a wide range of baselines. By utilizing its charge identification capability, ICAL can efficiently distinguish $μ^-$ and $μ^+$ events. Atmospheric neutrinos passing long distances through Earth can be detected at ICAL with good resolution in energy and direction, which enables ICAL to see the density-dependent matter oscillations experienced by upward-going neutrinos in the multi-GeV range of en…
The possibility of Lorentz Invariance Violation (LIV) may appear in unified theories, such as string theory, which allow the existence of a new space-time structure at the Planck scale ($M_p \sim 10^{19}$ GeV). This effect can be observed at low energies with a strength of $\sim 1/M_p$ using the perturbative approach. In the minimal Standard Model extension (SME) framework, the neutrino mass-induced flavor oscillation gets modified in the presence of LIV. The Iron Calorimeter (ICAL) detector at the proposed India-based Neutrino Observatory (INO) offers a unique window to probe these LIV parame…
Impact of errors in the magnetic field measurement on the precision determination of neutrino oscillation parameters at the proposed ICAL detector at INO
Studies on Response Uniformity of RPC and Exploring Oscillation Dip and Valley, Non-Standard Interactions, and Earth's Core using Atmospheric Neutrinos at ICAL-INO detector
