TRIGA Mark II反应堆全功率稳态特性
Characterization of the TRIGA Mark II reactor full-power steady state
摘要:
在这项工作中,全功率稳态的帕维亚大学的TRIGA马克II核反应堆的表征进行耦合蒙特卡罗(MC)模拟中子学与“多物理”模型的热工水力学。中子分析已开始从MC模型的整个反应堆系统,MCNP 5代码的基础上,已经验证了在新鲜燃料和零功率配置(其中热效应可以忽略不计)使用现有的实验数据作为基准。为了描述全功率堆的结构,堆芯温度分布是必要的。为了评估它,已经开发了一个热工水力模型,使用MC模拟的功率分布结果作为输入。热工水力模型的重点是核心活动区,并考虑到过冷沸腾的影响,目前在全反应堆功率。然后将获得的温度分布引入MC模型中,并进行基准分析以验证新燃料和全功率配置下的模型。全功率反应堆临界的实验数据和模拟结果之间的良好协议,证明了所采用的分析方法的可靠性,无论是从中子学和热工水力学的角度来看。
英文摘要:
In this work, the characterization of the full-power steady state of the TRIGA Mark II nuclear reactor of the University of Pavia is performed by coupling Monte Carlo (MC) simulation for neutronics with "Multiphysics" model for thermal-hydraulics. Neutronic analyses have been performed starting from a MC model of the entire reactor system, based on the MCNP5 code, that was already validated in fresh fuel and zero-power configuration (in which thermal effects are negligible) using the available experimental data as benchmark. In order to describe the full-power reactor configuration, the temperature distribution in the core is necessary. To evaluate it, a thermal-hydraulic model has been developed, using the power distribution results from MC simulation as input. The thermal-hydraulic model is focused on the core active region and takes into account sub-cooled boiling effects present at full reactor power. The obtained temperature distribution is then introduced in the MC model and a benchmark analysis is carried out to validate the model in fresh fuel and full-power configuration. The good agreement between experimental data and simulation results concerning full-power reactor criticality, proves the reliability of the adopted methodology of analysis, both from neutronics and thermal-hydraulics perspective.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。