arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1412.7818cs.ET
收藏

基于碳纳米管的电流模式高速节能片上数据传输延迟模型

Carbon Nanotube Based Delay Model For High Speed Energy Efficient on Chip Data Transmission Using: Current Mode Technique

Sunil Jadav, Munish Vashistah, Rajeevan Chandel

摘要:

速度是高密度超大规模集成电路网络的主要关注点。本文提出了具有电阻负载终端的VLSI互连线电流模式信号传输的闭合延迟模型。利用传输线的特性阻抗和电感效应对RLC互连线进行建模。电感效应在较低的技术节点处占主导地位,被建模为等效电阻。在该模型中,一阶传递函数的设计使用有限差分方程,并通过施加在源和负载终止的边界条件。据观察,主导极点决定系统的响应和延迟在所提出的模型。使用CNIA工具(碳纳米管互连分析仪)的互连线参数估计在45纳米技术节点。新提出的电流模式模型的优越性已被验证的CNT类型的材料。与电压模式信令相比,其优越性因子仍为66.66%。并且电流模式消耗0.015pJ能量,其中VM消耗0.045pJ用于跨CNT材料上的互连的单个比特传输。其次,集中RLC电路的阻尼因子被证明是一个有用的品质因数。

英文摘要:

Speed is a major concern for high density VLSI networks. In this paper the closed form delay model for current mode signalling in VLSI interconnects has been proposed with resistive load termination. RLC interconnect line is modelled using characteristic impedance of transmission line and inductive effect. The inductive effect is dominant at lower technology node is modelled into an equivalent resistance. In this model first order transfer function is designed using finite difference equation, and by applying the boundary conditions at the source and load termination. It has been observed that the dominant pole determines system response and delay in the proposed model. Using CNIA tool (carbon nanotube interconnect analyzer) the interconnect line parameters has been estimated at 45nm technology node. The novel proposed current mode model superiority has been validated for CNT type of material. It superiority factor remains to 66.66% as compared to voltage mode signalling. And current mode dissipates 0.015pJ energy where as VM consume 0.045pJ for a single bit transmission across the interconnect over CNT material. Secondly the damping factor of a lumped RLC circuit is shown to be a useful figure of merit.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑