粘性粉末在简化几何形状下的剂量试验和离散元模拟
Experiments and Discrete Element Simulation of the Dosing of Cohesive Powders in a Simplified Geometry
摘要:
我们进行实验和离散元模拟的粘性颗粒材料的剂量在一个简化的几何形状。该装置是一个简化的罐盒,其中粉末通过连接到电机的恒定螺距螺旋进料器的作用从盒中定量排出。一次给药包括一个旋转步骤,然后是下一次给药前的一段休息时间。从实验中,我们报告的操作性能的剂量过程中,通过剂量时间,线圈间距和初始粉末质量的变化。我们发现,剂量的质量表现出增加的线性依赖于剂量的时间和转速。相反,从罐输出的质量不与线圈数量的增加/减少成正比。通过校准颗粒间的摩擦力和凝聚力,我们表明,DEM模拟可以定量再现实验结果较小的群众,但也高估了堵塞和堵塞。使用适当的均匀化工具,可以进一步了解微观结构和宏观场。这项工作表明,颗粒缩放和颗粒特性的适应是一种可行的方法,以克服不可处理的颗粒数量与细,粘性粉末的实验中固有的,并打开了网关,以模拟其在更复杂的几何形状的流动。
英文摘要:
We perform experiments and discrete element simulations on the dosing of cohesive granular materials in a simplified geometry. The setup is a simplified canister box where the powder is dosed out of the box through the action of a constant-pitch screw feeder connected to a motor. A dose consists of a rotation step followed by a period of rest before the next dosage. From the experiments, we report on the operational performance of the dosing process through a variation of dosage time, coil pitch and initial powder mass. We find that the dosed mass shows an increasing linear dependence on the dosage time and rotation speed. In contrast, the mass output from the canister is not directly proportional to an increase/decrease in the number coils. By calibrating the interparticle friction and cohesion, we show that DEM simulation can quantitatively reproduce the experimental findings for smaller masses but also overestimate arching and blockage. With appropriate homogenization tools, further insights into microstructure and macroscopic fields can be obtained. This work shows that particle scaling and the adaptation of particle properties is a viable approach to overcome the untreatable number of particles inherent in experiments with fine, cohesive powders and opens the gateway to simulating their flow in more complex geometries.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。