弹簧重力仪惯性加速度标定实验
Spring gravimeter calibration experiment with an inertial acceleration platform
摘要:
本实验测试了一种自动标定绝对惯性力的相对重力仪。整个标定系统由单片机控制,步进电机产生低频振荡。它能产生不同周期的低频正弦惯性力。采用线性可变差动Transformer(LVDT)传感器来确定平台的频率传递函数和垂直运动的稳定性。平台上安装了两台LCR重力仪(G336、G906),平台机械部分引起的垂直位移误差小于0.01mm。G336位于站台中央,G906位于站台左侧。在微处理器中集成了校准程序,可每周发送一次校准信号。在7个月以上的实验中,G336的标度因子为8128.647 nm/s2/v,不确定度为1.1%,G906的标度因子为9421.017 nm/s2/v,波动率为2.7%。
英文摘要:
This experiment tested an automatically calibrate the relatively gravimeter with an absolute inertial force. The whole calibration system was controlled by microprocessor and low frequency oscillations were generated by a step motor. It could produce different period low frequency sinusoid inertial force. A LVDT (Linear Variable Differential Transformer) sensor was introduced to determine the frequency transfer function and the stability of platform vertical motion. The error of vertical displacement induced by the mechanical part of platform is less than 0.01 mm. Two LCR gravimeters (G336, G906) were settled on the platform. G336 was in the centre of platform and G906 was in the left side. A calibration program has been integrated in the micro processor which could send calibrate signal once a week. During the more than 7 moths experiment, the scale factor of G336 is 8128.647 nm/s2/v with 1.1% uncertainties and G906 is 9421.017 nm/s2/v with 2.7% fluctuations.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。