水力-机械耦合双尺度本构模型的概念方法
A Conceptual Approach to Two-Scale Constitutive Modelling For Hydro-Mechanical Coupling
摘要:
在地热储层或从储层岩石中提取碳氢化合物的流体流动与固体破坏耦合的大尺度建模通常涉及两个尺度的行为:非弹性局部化区的较低尺度,以及可以合理假设弹性行为的大尺度连续体。在这两个尺度下,对应于力学性质的导水率是不同的。在体弹性围岩中,导水率随变形的变化不大,而在局部化带的较低尺度上,导水率因非弹性变形而发生显著变化。由于破裂和/或扩张而导致的渗透性增加,或由于材料压实而导致的渗透性降低可能发生在该区域内。面临的挑战是预测水力传导率的演变,再加上在变形过程的所有阶段的材料的机械行为。在扩散变形的早期阶段,可以合理地假设材料的渗透率在整个代表体积元(RVE)上是均匀的。然而,局部破坏导致RVE的不同部分中的明显不同的电导率。本文建立了岩石变形扩散阶段和局部化阶段的流体-力学耦合的一般框架和相应的场方程。特别是,嵌入低尺度的流体力学行为的本地化区域内的弹性体,连同其相应的有效尺寸,有助于有效地处理在大规模建模的缩放问题。初步结果表明,这种新的方法的有前途的功能。
英文摘要:
Large scale modelling of fluid flow coupled with solid failure in geothermal reservoirs or hydrocarbon extraction from reservoir rocks usually involves behaviours at two scales: lower scale of the inelastic localization zone, and larger scale of the bulk continuum where elastic behaviour can be reasonably assumed. The hydraulic conductivities corresponding to the mechanical properties at these two scales are different. In the bulk elastic host rock, the hydraulic conductivity does not vary much with the deformation, while it significantly changes in the lower scale of the localization zone due to inelastic deformation. Increase of permeability due to fracture and/or dilation, or reduction of permeability due to material compaction can take place inside this zone. The challenge is to predict the evolution of hydraulic conductivities coupled with the mechanical behaviour of the material in all stages of the deformation process. In the early stage of diffuse deformation, the permeability of the material can be reasonably assumed to be homogenous over the whole Representative Volume Element (RVE) However, localized failure results in distinctly different conductivities in different parts of the RVE. This paper establishes a general framework and corresponding field equations to describe the hydro-mechanical coupling in both diffuse and localized stages of deformation in rocks. In particular, embedding the lower scale hydro-mechanical behaviour of the localization zone inside an elastic bulk, together with their corresponding effective sizes, helps effectively deal with scaling issues in large-scale modelling. Preliminary results are presented which demonstrate the promising features of this new approach.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。