RAM仲裁器的结构设计
Architectural Design of a RAM Arbiter
摘要:
存储(和访问)数据的标准存储器模块是为单个系统访问数据而设计的。更复杂的存储器模块将通过存储器控制器访问,该存储器控制器也是为一个系统设计的。对于多个系统访问单个存储器模块,必须有某种便利,允许它们访问存储器而不覆盖或破坏来自其他系统的访问。这是通过使用存储器仲裁器来完成的,该仲裁器控制进入存储器控制器的流量。仲裁器有一组规则要遵守,以便选择哪个系统与存储器控制器接通。在这个项目中,一个常规的RAM模块被设计用于一个系统。此外,还设计了一个存储器仲裁器的Verilog,允许一个以上的系统使用一个单一的RAM模块在一个受控和同步的方式。仲裁器使用固定的优先级方案来避免系统的饥饿。此外,与这种系统相关的主要问题之一,即地址冲突问题已经得到了很好的处理和解决。该设计在仿真中得到验证,并在配备Virtex 6 FPGA的Xilinx ML605评估板上得到验证。
英文摘要:
Standard memory modules to store (and access) data are designed for use with a single system accessing it. More complicated memory modules would be accessed through a memory controller, which are also designed for one system. For multiple systems to access a single memory module there must be some facilitation that allows them to access the memory without overriding or corrupting the access from the others. This was done with the use of a memory arbiter, which controls the flow of traffic into the memory controller. The arbiter has a set of rules to abide to in order to choose which system gets through to the memory controller. In this project, a regular RAM module is designed for use with one system. Furthermore, a memory arbiter is also designed in Verilog that allows for more than one system to use a single RAM module in a controlled and synchronized manner. The arbiter uses a fixed priority scheme to avoid starvation of the system. In addition one of the major problems associated with such systems i.e. The Address Clash Problem has been nicely tackled and solved. The design is verified in simulation and validated on a Xilinx ML605 evaluation board with a Virtex 6 FPGA.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。