The introduction of device-to-device (D2D) into cellular networks poses many new challenges in the resource allocation design due to the co-channel interference caused by spectrum reuse and limited battery life of user equipments (UEs). In this paper, we propose a distributed interference-aware energy-efficient resource allocation algorithm to maximize each UE's energy efficiency (EE) subject to its specific quality of service (QoS) and maximum transmission power constraints. We model the resource allocation problem as a noncooperative game, in which each player is self-interested and wants to maximize its own EE. The formulated EE maximization problem is a non-convex problem and is transformed into a convex optimization problem by exploiting the properties of the nonlinear fractional programming. An iterative optimization algorithm is proposed and verified through computer simulations.
Device-to-device(D2D) underlaying communication brings great benefits to the cellular networks from the improvement of coverage and spectral efficiency at the expense of complicated transceiver design. With frequency spectrum sharing mode, the D2D user generates interference to the existing cellular networks either in downlink or uplink. Thus the resource allocation for D2D pairs should be designed properly in order to reduce possible interference, in particular for uplink. In this paper, we introduce a novel bandwidth allocation scheme to maximize the utilities of both D2D users and cellular …
The small cells in millimeter wave (mmWave) have been utilized extensively for the fifth generation (5G) mobile networks. And full-duplex (FD) communications become possible with the development of self-interference (SI) cancellation technology. In this paper, we focus on the optimal allocation of the sub-channels in the small cells deployed densely underlying the mmWave networks. In order to improve the resource utilization and network capacity, device-to-device (D2D) communications are adopted in networks. For maximizing the system throughput, we propose a cooperative sub-channel allocation …
This paper proposes Leader in Charge (LiC), a reliable multicast architecture for device-to-device (D2D) radio underlaying cellular networks. The multicast-requesting user equipments (UEs) in close proximity form a D2D cluster to receive the multicast packets through cooperation. In addition to receiving the multicast packets from the eNB, UEs share what they received from the multicast on short-range links among UEs, namely the D2D links, to exploit the wireless resources a more efficient way. Consequently, we show that utilizing the D2D links in cellular networks increases the throughput of …
The basic idea of device-to-device (D2D) communication is that pairs of suitably selected wireless devices reuse the cellular spectrum to establish direct communication links, provided that the adverse effects of D2D communication on cellular users is minimized and cellular users are given a higher priority in using limited wireless resources. Despite its great potential in terms of coverage and capacity performance, implementing this new concept poses some challenges, in particular with respect to radio resource management. The main challenges arise from a strong need for distributed D2D solu…
Device-to-device (D2D) communication in cellular networks allows direct transmission between two cellular devices with local communication needs. Due to the increasing number of autonomous heterogeneous devices in future mobile networks, an efficient resource allocation scheme is required to maximize network throughput and achieve higher spectral efficiency. In this paper, performance of network-integrated D2D communication under channel uncertainties is investigated where D2D traffic is carried through relay nodes. Considering a multi-user and multi-relay network, we propose a robust distribu…
Heterogeneous cellular networks (HCNs) with millimeter wave (mmWave) communications included are emerging as a promising candidate for the fifth generation mobile network. With highly directional antenna arrays, mmWave links are able to provide several-Gbps transmission rate. However, mmWave links are easily blocked without line of sight. On the other hand, D2D communications have been proposed to support many content based applications, and need to share resources with users in HCNs to improve spectral reuse and enhance system capacity. Consequently, an efficient resource allocation scheme fo…
In this paper, we present a framework for resource allocations for multicast device-to-device (D2D) communications underlaying a cellular network. The objective is to maximize the sum throughput of active cellular users (CUs) and feasible D2D groups in a cell, while meeting a certain signal-to-interferenceplus- noise ratio (SINR) constraint for both the CUs and D2D groups. We formulate the problem of power and channel allocation as a mixed integer nonlinear programming (MINLP) problem where one D2D group can reuse the channels of multiple CUs and the channel of each CU can be reused by multipl…
Device-to-device (D2D) communication has seen as a major technology to overcome the imminent wireless capacity crunch and to enable new application services. In this paper, we propose a social-aware approach for optimizing D2D communication by exploiting two layers: the social network and the physical wireless layers. First we formulate the physical layer D2D network according to users' encounter histories. Subsequently, we propose an approach, based on the so-called Indian Buffet Process, so as to model the distribution of contents in users' online social networks. Given the social relations …
In this paper, we aim to secure the D2D communication of the D2D-underlaid cellular network by leveraging covert communication to hide its presence from the vigilant adversary. In particular, there are adversaries aiming to detect D2D communications based on their received signal powers. To avoid being detected, the legitimate entity, i.e., D2D-underlaid cellular network, performs power control so as to hide the presence of the D2D communication. We model the combat between the adversaries and the legitimate entity as a two-stage Stackelberg game. Therein, the adversaries are the followers and…
Exploiting cognition to the cache-enabled device-to-device (D2D) communication underlaying the multi-channel cellular network is the main focus of this paper. D2D pairs perform direct communications via sensing the available cellular channels, bypassing the base station (BS). Dynamic service is considered and the network performance is evaluated with the stochastic geometry. Node locations are first modeled as mutually independent Poisson Point Processes, and the service queueing process is formulated. Then the corresponding tier association and cognitive access protocol are developed. The del…
The utility of smartphones has been limited to a great extent by their short battery life. In this work, we propose a new approach to prolonging smartphone battery life. We introduce the notions of "valueless" and "valued battery", as being the available battery when the user does or does not have access to a power source, respectively. We propose a cooperative system where users with high battery level help carry the traffic of users with low battery level. Our scheme helps increase the amount of valued battery in the network, thus it reduces the chance of users running out of battery early. …
It is important to assess the effect of transmit power allocation schemes on the energy consumption on random cellular networks. The energy efficiency of 5G green cellular networks with average and water-filling power allocation schemes is studied in this paper. Based on the proposed interference and achievable rate model, an energy efficiency model is proposed for MIMO random cellular networks. Furthermore, the energy efficiency with average and water-filling power allocation schemes are presented, respectively. Numerical results indicate that the maximum limits of energy efficiency are alway…
Machine-to-machine (M2M) communications are expected to provide ubiquitous connectivity between machines without the need of human intervention. To support such a large number of autonomous devices, the M2M system architecture needs to be extremely power and spectrally efficient. This article thus briefly reviews the features of M2M services in the third generation (3G) long-term evolution and its advancement (LTE-Advanced) networks. Architectural enhancements are then presented for supporting M2M services in LTE-Advanced cellular networks. To increase spectral efficiency, the same spectrum is…
In this paper, we consider distributive subband, power and rate allocation for a two-hop transmission in an orthogonal frequency-division multiple-access (OFDMA) cellular system with fixed relays which operate in decode-and-forward strategy. We take into account of system fairness by considering weighted sum goodput as our optimization objective. Based on the cluster-based architecture, we obtain a fast-converging distributive solution with only local imperfect CSIT by using decomposition of the optimization problem. To further reduce the signaling overhead and computational complexity, we pro…
Immersive social interactions of mobile users are soon to be enabled within a virtual space, by means of virtual reality (VR) technologies and wireless cellular systems. In a VR mobile social network, the states of all interacting users should be updated synchronously and with low latency via two-way communications with edge computing servers. The resulting end-to-end latency depends on the relationship between the virtual and physical locations of the wireless VR users and of the edge servers. In this work, the problem of analyzing and optimizing the end-to-end latency is investigated for a s…
The research efforts on cellular vehicle-to-everything (V2X) communications are gaining momentum with each passing year. It is considered as a paradigm-altering approach to connect a large number of vehicles with minimal cost of deployment and maintenance. This article aims to further push the state-of-the-art of cellular V2X communications by providing an optimization framework for wireless charging, power allocation, and resource block assignment. Specifically, we design a network model where roadside objects use wireless power from RF signals of electric vehicles for charging and informatio…
The 5G cellular wireless systems will have a multi-tier architecture consisting of macrocells, different types of licensed small cells and D2D networks to serve users with different quality-of-service (QoS) requirements in a spectrum efficient manner. Distributed resource allocation and interference management is one of the fundamental research challenges for such multi-tier heterogeneous networks. In this chapter, we consider the radio resource allocation problem in a multi-tier orthogonal frequency division multiple access (OFDMA)-based cellular (e.g., 5G LTE-A) network. In particular, we pr…
Wireless cellular networks feature two emerging technological trends. The first is the direct Device-to-Device (D2D) communications, which enables direct links between the wireless devices that reutilize the cellular spectrum and radio interface. The second is that of Machine-Type Communications (MTC), where the objective is to attach a large number of low-rate low-power devices, termed Machine-Type Devices (MTDs) to the cellular network. MTDs pose new challenges to the cellular network, one if which is that the low transmission power can lead to outage problems for the cell-edge devices. Anot…
Device-to-device (D2D) communication underlaying cellular networks is expected to bring significant benefits for utilizing resources, improving user throughput and extending battery life of user equipments. However, the allocation of radio and power resources to D2D communication needs elaborate coordination, as D2D communication can cause interference to cellular communication. In this paper, we study joint channel and power allocation to improve the energy efficiency of user equipments. To solve the problem efficiently, we introduce an iterative combinatorial auction algorithm, where the D2D…
Device-to-device (D2D) communication enables the user equipments (UEs) located in close proximity to bypass the cellular base stations (BSs) and directly connect to each other, and thereby, offload traffic from the cellular infrastructure. D2D communication can improve spatial frequency reuse and energy efficiency in cellular networks. This paper presents a comprehensive and tractable analytical framework for D2D-enabled uplink cellular networks with a flexible mode selection scheme along with truncated channel inversion power control. Different from the existing mode selection schemes where t…
Underlaying the cellular networks, Device to Device (D2D) communication brings the possibility to significantly improve the spectral efficiency in cellular networks and offload the traffic relayed by the base station. However, it creates new challenge for interference management as well. In this paper, we consider the multi-cell D2D underlaid cellular network in which many D2D links reuse the uplink resource simultaneously. The infeasibility of interference cancellation/alignment motivates us to force the D2D users near the base stations to work in cellular mode. Based on that, we present a di…
Device-to-Device (D2D) communication has been recognized as a promising technique to offload the traffic for the evolved Node B (eNB). However, the D2D transmission as an underlay causes severe interference to both the cellular and other D2D links, which imposes a great technical challenge to radio resource allocation. Conventional graph based resource allocation methods typically consider the interference between two user equipments (UEs), but they cannot model the interference from multiple UEs to completely characterize the interference. In this paper, we study channel allocation using hype…
Device-to-device (D2D) communications in cellular networks are promising technologies for improving network throughput, spectrum efficiency, and transmission delay. In this paper, we first introduce the concept of guard distance to explore a proper system model for enabling multiple concurrent D2D pairs in the same cell. Considering the Signal to Interference Ratio (SIR) requirements for both macro-cell and D2D communications, a geometrical method is proposed to obtain the guard distances from a D2D user equipment (DUE) to the base station (BS), to the transmitting cellular user equipment (CUE…
Recently, the so-called cell-free (CF) Massive MIMO architecture has been introduced, wherein a very large number of distributed access points (APs) simultaneously and jointly serve a much smaller number of mobile stations (MSs). The paper extends the CF approach to the case in which both the APs and the MSs are equipped with multiple antennas, proposing a beamfoming scheme that, relying on the channel hardening effect, does not require channel estimation at the MSs. We contrast the CF massive MIMO approach with a user-centric (UC) approach wherein each MS is served only by a limited number of…
For device-to-device (D2D) communications underlaying a cellular network with uplink resource sharing, both cellular and D2D links cause significant co-channel interference. In this paper, we address the critical issue of interference management in the network considering a practical path loss model incorporating both line-of-sight (LoS) and non-line-of-sight (NLoS) transmissions. To reduce the severe interference caused by active D2D links, we consider a mode selection scheme based on the maximum received signal strength (MRSS) for each user equipment (UE) to control the D2D-to-cellular inter…
We consider the resource allocation problem in cellular networks which support Device-to-Device Communications (D2D). For systems that enable D2D via only orthogonal resource sharing, we propose and analyze two resource allocation policies that guarantee access fairness among all users, while taking advantage of multi-user diversity and local D2D communications, to provide marked improvements over existing cellular-only policies. The first policy, the Cellular Fairness Scheduling (CFS) Policy, provides the simplest D2D extension to existing cellular systems, while the second policy, the D2D Fa…
Device-to-device (D2D) communication underlaying cellular networks allows mobile devices such as smartphones and tablets to use the licensed spectrum allocated to cellular services for direct peer-to-peer transmission. D2D communication can use either one-hop transmission (i.e., in D2D direct communication) or multi-hop cluster-based transmission (i.e., in D2D local area networks). The D2D devices can compete or cooperate with each other to reuse the radio resources in D2D networks. Therefore, resource allocation and access for D2D communication can be treated as games. The theories behind the…
Underlay device-to-device (D2D) multicast communication has potential to improve performance of cellular networks. However, co-channel interference among cellular users (CUs) and D2D multicast groups (MGs) limits the gains of such communication. Allowing the CUs to have exclusion zones around them where no receiver of any MG can exist, is a realistic and pragmatic approach to reduce the co-channel interference of cellular transmission on D2D multicast reception. We use a stochastic geometry based approach to model this scenario. Specifically, we model the locations of CUs and D2D MG receivers …
This paper presents a radio resource block allocation optimization problem for cellular communications systems with users running delay-tolerant and real-time applications, generating elastic and inelastic traffic on the network and being modelled as logarithmic and sigmoidal utilities respectively. The optimization is cast under a utility proportional fairness framework aiming at maximizing the cellular systems utility whilst allocating users the resource blocks with an eye on application quality of service requirements and on the procedural temporal and computational efficiency. Ultimately, …
Multicasting for disseminating popular data is an interesting solution for improving the energy and spectral efficiencies of cellular networks. To improve the achievable performance of such networks, underlay device-to-device (D2D) multicast communication offers a practical solution. However, despite significant potential for providing higher throughput and lower delay, implementing underlay D2D multicast communication poses several challenges, such as mutual interference among cellular users (CUs) and D2D multicast groups (MGs), and overhead signaling to provide channel state information, tha…
Spectrum sharing is an elegant solution to addressing the scarcity of the bandwidth for wireless communications systems. This research studies the feasibility of sharing the spectrum between sectorized cellular systems and stationary radars interfering with certain sectors of the communications infrastructure. It also explores allocating optimal resources to mobile devices in order to provide with the quality of service for all running applications whilst growing the communications network spectrally coexistent with the radar systems. The rate allocation problem is formulated as two convex opt…
We define and propose a resource allocation architecture for cellular networks. The architecture combines content-aware, time-aware and location-aware resource allocation for next generation broadband wireless systems. The architecture ensures content-aware resource allocation by prioritizing real-time applications users over delay-tolerant applications users when allocating resources. It enables time-aware resource allocation via traffic-dependent pricing that varies during different hours of day (e.g. peak and off-peak traffic hours). Additionally, location-aware resource allocation is integ…
Future wireless cellular networks must support both enhanced mobile broadband (eMBB) and ultra reliable low latency communication (URLLC) to manage heterogeneous data traffic for emerging wireless services. To achieve this goal, a promising technique is to enable flexible frame structure by dynamically changing the data frame's numerology according to the channel information as well as traffic quality of service requirements. However, due to nonorthogonal subcarriers, this technique can result in an interference, known as inter numerology interference (INI), thus, degrading the network perform…
We study joint spectrum allocation and user association in heterogeneous cellular networks with multiple tiers of base stations. A stochastic geometric approach is applied as the basis to derive the average downlink user data rate in a closed-form expression. Then, the expression is employed as the objective function in jointly optimizing spectrum allocation and user association, which is of non-convex programming in nature. A computationally efficient Structured Spectrum Allocation and User Association (SSAUA) approach is proposed, solving the optimization problem optimally when the density o…
Millimeter-wave (mmWave) bands have been attracting growing attention as a possible candidate for next-generation cellular networks, since the available spectrum is orders of magnitude larger than in current cellular allocations. To precisely design mmWave systems, it is important to examine mmWave interference and SIR coverage under large-scale deployments. For this purpose, we apply an accurate mmWave channel model, derived from experiments, into an analytical framework based on stochastic geometry. In this way we obtain a closed-form SIR coverage probability in large-scale mmWave cellular n…
This report presents a more detailed description of the algorithm and simulations published in papers [1, 2]. It includes a step by step description of the algorithm and included the corresponding flow chart. In addition, detailed instructions of the MATLAB code used to simulate the proposed allocation algorithm in [1, 2] is presented. The report starts with a brief motivation of resource allocation problem in wireless networks. Then, some of the prior related work on the subject are mentioned. Finally, we provide the details instructions on MATLAB functions used in our algorithm. More rigorou…
In order to cope with the ever increasing traffic load that networks will need to support, a new approach for planning cellular networks deployments should be followed. Traditionally, cell association and resource allocation has been based on the received signal power but this approach seems to be inadequate regarding the brewing of heterogeneous networks. In this work, we first implement a network simulator in order to test new cell associacion and resource allocation techniques. Then, we pose the network utility maximisation problem, reformulating the Downlink and Uplink Decoupling (DUDe) sc…
Massive MIMO communication systems have been identified as one of the most prominent technologies of the next generation wireless standards, such as 5G, due to the large gains in energy and spectral efficiency that can be achieved. In the asymptotic condition of infinite number of antennas at the base station (BS), the performance bottleneck of these systems is due to the pilot contamination effect, i.e., the directional interference arising from users in adjacent cells that reuse the same set of orthogonal training sequences, and thus the interference seen by each user is determined by the pi…
In this paper, we conduct a study to optimize resource allocation for adaptive real-time and delay-tolerant applications in cellular systems. To represent the user applications via several devices and equipment, sigmoidal-like and logarithm utility functions are used. A fairness proportional utility functions policy approach is used to allocate the resources among the user equipment (UE)s in a utility percentage form and to ensure a minimum level of customer satisfaction for all the subscribers. Meanwhile, the priority of resources allocation is given to the real-time applications. We measure …
In a multi-cell scenario, the inter-cell interference (ICI) is detrimental in achieving the intended system performance, in particular for the edge users. There is paucity of work available in literature on ICI coordination (ICIC) for relay-assisted cellular networks (RACN). In this paper, we do a survey on the ICIC schemes in cellular networks and RACN. We then propose a self-organized resource allocation plan for RACN to improve the edge user's performance by ICIC. We compare the performance of reuse-1, reuse-3, soft frequency reuse (SFR) scheme, proposed plan with and without relays. The pe…
In this paper, we consider a resource allocation with carrier aggregation optimization problem in long term evolution (LTE) cellular networks. In our proposed model, users are running elastic or inelastic traffic. Each user equipment (UE) is assigned an application utility function based on the type of its application. Our objective is to allocate multiple carriers resources optimally among users in their coverage area while giving the user the ability to select one of the carriers to be its primary carrier and the others to be its secondary carriers. The UE's decision is based on the carrier …
In this paper, we introduce a novel approach for power allocation in cellular networks. In our model, we use sigmoidal-like utility functions to represent different users' modulation schemes. Each utility function is a representation of the probability of successfully transmitted packets per unit of power consumed by a user, when using a certain modulation scheme. We consider power allocation with utility proportional fairness policy, where the fairness among users is in utility percentage i.e. percentage of successfully transmitted packets of the corresponding modulation scheme. We formulate …
Device-to-device (D2D) communications as an underlay of a LTE-A (4G) network can reduce the traffic load as well as power consumption in cellular networks by way of utilizing peer-to-peer links for users in proximity of each other. This would enable other cellular users to increment their traffic, and the aggregate traffic for all users can be significantly increased without requiring additional spectrum. However, D2D communications may increase interference to cellular users (CUs) and force CUs to increase their transmit power levels in order to maintain their required quality-of-service (QoS…
Base station switching (BSS) can results in significant reduction in energy consumption of cellular networks during low traffic conditions. We show that the coverage loss due to BSS can be compensated via coordinated multi-point (CoMP) based transmission in a cluster of base stations. For a BSS with CoMP based system, we propose various BSS patterns to achieve suitable trade-offs between energy savings and throughput. We formulate the CoMP resource allocation and user scheduling as a joint optimization problem. We derive the optimal time fraction and user scheduling for this problem and use it…
With the increasing number of user equipment (UE) and data demands, denser access points (APs) are being employed. Resource allocation problems have been extensively researched with interference treated as noise. It is well understood that the overall spectral efficiency can be significantly improved if multiple terminals coordinate their transmissions either coherently or non-coherently.The focus of this paper is to study how to select pairs of APs for coordination and allocate resources accordingly. An optimization problem is formulated to maximize the network utility function by optimizing …
The growing demand for high-speed data, quality of service (QoS) assurance and energy efficiency has triggered the evolution of 4G LTE-A networks to 5G and beyond. Interference is still a major performance bottleneck. This paper studies the application of physical-layer network coding (PNC), a technique that exploits interference, in heterogeneous cellular networks. In particular, we propose a rate-maximising relay selection algorithm for a single cell with multiple relays based on the decode-and-forward strategy. With nodes transmitting at different powers, the proposed algorithm adapts the r…
The explosive wireless data service requirement accompanied with carbon dioxide emission and consumption of traditional energy has put pressure on both industry and academia. Wireless networks powered with the uneven and intermittent generated renewable energy have been widely researched and lead to a new research paradigm called green communication. In this paper, we comprehensively consider the total generated renewable energy, QoS requirement and channel quality, then propose a utility based renewable energy allocation policy. The utility here means the satisfaction degree of users with a c…
In this paper, we introduce a novel approach for optimal resource allocation with frequency reuse for users with elastic and inelastic traffic in cellular networks. In our model, we represent users' applications running on different user equipments (UE)s by logarithmic and sigmoid utility functions. We applied utility proportional fairness allocation policy, i.e. the resources are allocated among users with fairness in utility percentage of the application running on each mobile station. Our objective is to allocate the cellular system resources to mobile users optimally from a multi-cell netw…
In this paper, we consider resource allocation optimization problem in cellular networks for different types of users running multiple applications simultaneously. In our proposed model, each user application is assigned a utility function that represents the application type running on the user equipment (UE). The network operators assign a subscription weight to each UE based on its subscription. Each UE assigns an application weight to each of its applications based on the instantaneous usage percentage of the application. Additionally, UEs with higher priority assign applications target ra…
The mounting content sharing among users has resulted in a considerable rise in wireless data traffic, pressurizing the cellular networks to undergo a suitable upheaval. A competent technology of the fifth-generation networks (5G) for efficiently supporting proximity-based applications is Device-to-Device (D2D) communication, underlaying cellular networks. Significant advances have been made till date, for allocating resources to D2D users in cellular networks, such that sharing of spectral resources between cellular and D2D users is carried out in a coordinated manner. In this paper, a sector…
In this paper, we propose a novel optimal power allocation method that features a power limit function and is able to ensure more users reach the desired Quality-of-Service (QoS). In our model we use sigmoidal-like utility functions to represent the probability of successful reception of packets at user equipment (UE)s. Given that each UE has a different channel quality and different location from base station (BS), it has different CQI and modulation. For each CQI zone, we evaluate the power threshold which is required to achieve the minimum QoS for each UE and show that the higher CQI the lo…
Tremendous growth in the demand for wireless applications such as streaming audio/videos, Skype and video games require high data rate irrespective of user's location in the cellular network. However, the Quality of Service (QoS) of users degrades at the cell boundary. Relay enhanced multi-hop cellular network is one of the cost effective solution to improve the performance of cell edge users. Optimal deployment of Fixed Relay Nodes (FRNs) is essential to satisfy the QoS requirement of edge users. We propose new schemes for channel partitioning and FRN placement in cellular networks. Path-loss…
In this paper, we present a novel approach for robust optimal resource allocation with joint carrier aggregation to allocate multiple carriers resources optimally among users with elastic and inelastic traffic in cellular networks. We use utility proportional fairness allocation policy, where the fairness among users is in utility percentage of the application running on the user equipment (UE). Each UE is assigned an application utility function based on the type of its application. Our objective is to allocate multiple carriers resources optimally among users subscribing for mobile services.…
Cellular vehicle-to-everything (V2X) communication is crucial to support future diverse vehicular applications. However, for safety-critical applications, unstable vehicle-to-vehicle (V2V) links and high signalling overhead of centralized resource allocation approaches become bottlenecks. In this paper, we investigate a joint optimization problem of transmission mode selection and resource allocation for cellular V2X communications. In particular, the problem is formulated as a Markov decision process, and a deep reinforcement learning (DRL) based decentralized algorithm is proposed to maximiz…
In part I of this paper, a distributed and a centralized architecture for an optimal radio resource allocation aware of the traffic delay-tolerance nature, user subscription type, and application usage variations were developed. In the current article, a transmission overhead analysis of the aforementioned distributed and a centralized architectures is investigated and it is proved that the centralized scheme endures a significantly lower transmission overhead than does the distributed approach. Furthermore, the lower bounds of the transmission overhead for both the centralized and the distrib…
Unmanned aerial vehicles (UAVs) can provide an effective solution for improving the coverage, capacity, and the overall performance of terrestrial wireless cellular networks. In particular, UAV-assisted cellular networks can meet the stringent performance requirements of the fifth generation new radio (5G NR) applications. In this paper, the problem of energy-efficient resource allocation in UAV-assisted cellular networks is studied under the reliability and latency constraints of 5G NR applications. The framework of ruin theory is employed to allow solar-powered UAVs to capture the dynamics o…
Techniques for channel allocation in cellular networks have been an area of intense research interest for many years. An efficient channel allocation scheme can significantly reduce call-blocking and calldropping probabilities. Another important issue is to effectively manage the power requirements for communication. An efficient power control strategy leads to reduced power consumption and improved signal quality. In this paper, we present a novel integer linear program (ILP) formulation that jointly optimizes channel allocation and power control for incoming calls, based on the carrier-to-in…
