基于多网格误差估计的材料加工仿真中由测得的力和扭矩确定模具界面温度和牵引条件的方法
A Methodology to Determine Tooling Interface Temperature and Traction Conditions from Measured Force and Torque in Materials Processing Simulations Based on Multimesh Error Estimation
摘要:
提出了一种方法,用于估计平均值的温度和摩擦牵引力的工具-工件界面使用测量值的力和扭矩施加到工具。该方法是专门为摩擦搅拌焊接和摩擦搅拌加工应用而开发的,但是足够通用以用于涉及工具-工件界面处的滑动接触和加热的各种其他工艺。该方法与有限元框架,旨在预测工件材料的微观结构状态的演变,因为它经历了一个复杂的热机械历史强加的工艺工具。我们采用三维,欧拉,有限元公式,它包括速度,温度和材料状态演化的解决方案之间的耦合。该方法的一个关键要素是从典型的力和扭矩的测量值来估计工具界面牵引力和温度的程序。该过程自然会导致一个直观的基础,用于估计与多个网格结合使用,以确保收敛的误差。该方法是证明了一套的三个实验,以前发表的一部分,对摩擦搅拌焊接焊接速度的影响的研究。探头界面温度和扭矩估计为所有三个焊接速度和多网格误差估计方法是用来量化的收敛速度。最后,计算和测量的功率使用的比较被用作进一步的验证。使用收敛的结果,在材料流动,温度,应力,变形速率和材料状态的变化焊接条件的趋势进行检查。
英文摘要:
A methodology is presented for estimating average values for the temperature and the frictional traction over a tool-workpiece interface using measured values of force and torque applied to the tool. The approach was developed specifically for friction stir welding and friction stir processing applications, but is sufficiently general to be of use in a variety of other processes that involve sliding contact and heating at a tool-workpiece interface. The methodology works with a finite element framework that is intended to predict the evolution of the microstructural state of the workpiece material as it undergoes a complex thermomechanical history imposed by the process tooling. We employ a three-dimensional, Eulerian, finite element formulation; it includes coupling among the solutions for velocity, temperature and material state evolution. A critical element of the methodology is a procedure to estimate the tool interface traction and temperature from typical, measured values of force and torque. The procedure leads naturally to an intuitive basis for estimating error that is used in conjunction with multiple meshes to assure convergence. The methodology is demonstrate for a suite of three experiments that had been previously published as part of a study on the effect of weld speed on friction stir welding. The probe interface temperatures and torques are estimated for all three weld speeds and the multi-mesh error estimation methodology is employed to quantify the rate of convergence. Finally, comparison of computed and measured power usage is used as a further validation. Using the converged results, trends in the material flow, temperature, stress, deformation rate and material state with changing weld conditions are examined.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。