laser诱导击穿光谱法分析煤中碳的光谱标准化和主因子偏最小二乘法模型
A model combining spectrum standardization and dominant factor based partial least square method for carbon analysis in coal by laser-induced breakdown spectroscopy
摘要:
利用激光诱导击穿光谱(LIBS)技术成功地定量测定煤中碳含量,但其精度和准确度相对较低。将光谱标准化方法与偏最小二乘法(PLS)相结合,提高LIBS测量煤中碳含量的准确度。该组合模型采用光谱标准化方法将碳谱线强度转换为标准状态,以更准确地计算出主导碳浓度,然后应用具有全光谱信息的PLS校正残差。将该组合模型应用于24个烟煤样品的碳含量测定。结果表明,与我们建立的光谱标准化模型和基于主因子的PLS模型相比,该组合模型可以进一步提高测量精度。例如,组合模型的决定系数(R2)、预测均方根误差(RMSEP)和平均相对误差(ARE)分别为0.99、1.75%和2.39%,而光谱标准化方法的决定系数(R2)、预测均方根误差(RMSEP)和平均相对误差(ARE)分别为0.83、2.71%和3.40%;主因子PLS模型的预测值分别为0.99、2.66%和3.64%。
英文摘要:
Successful quantitative measurement of carbon content in coal using laser-induced breakdown spectroscopy (LIBS) is suffered from relatively low precision and accuracy. In the present work, the spectrum standardization method was combined with the dominant factor based partial least square (PLS) method to improve the measurement accuracy of carbon content in coal by LIBS. The combination model employed the spectrum standardization method to convert the carbon line intensity into standard state for more accurately calculating the dominant carbon concentration, and then applied PLS with full spectrum information to correct the residual errors. The combination model was applied to the measurement of carbon content for 24 bituminous coal samples. The results demonstrated that the combination model could further improve the measurement accuracy compared with both our previously established spectrum standardization model and dominant factor based PLS model using spectral area normalized intensity for the dominant factor model. For example, the coefficient of determination (R2), the root-mean-square error of prediction (RMSEP), and the average relative error (ARE) for the combination model were 0.99, 1.75%, and 2.39%, respectively; while those values for the spectrum standardization method were 0.83, 2.71%, and 3.40%, respectively; and those values for the dominant factor based PLS model were 0.99, 2.66%, and 3.64%, respectively.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。