边界层不稳定性的集中与分散主动控制
Centralised versus Decentralised Active Control of Boundary Layer Instabilities
摘要:
本文利用线性控制理论构造了一个输出反馈控制器,用于衰减平板边界层中的小振幅Tollmien-Schlichting(TS)波包,在展向上均匀分布了72个定域目标(18个干扰源,18个致动器,18个估计传感器和18个目标传感器)。在一个完全三维的配置,输入和输出之间的互连变得迅速不可行时,执行器和传感器的数量增加spanswise方向。这项工作的目的是了解如何可以设计一个有效的控制器,只连接一个子集的致动器的传感器,从而降低控制器的复杂性,而不包括的效率。我们发现,使用一个半分散的方法-其中小的控制单元组成的3个估计传感器连接到3个致动器沿展向方向重复6次-结果只有在11%的控制性能降低。我们的研究结果表明,最好的性能是获得的控制单元,(i)是足够宽,以占全展向尺度的波包,当它到达致动器和(ii)被设计为占的扰动,这是来自横向侧(串扰)的估计传感器。我们还发现,串扰的影响并不像扩散效应那样重要。
英文摘要:
We use linear control theory to construct an output feedback controller for the attenuation of small-amplitude Tollmien-Schlichting (TS) wavepackets in a flat-plate boundary layer.We distribute evenly in the spanwise direction up to 72 localized objects near the wall (18 disturbances sources, 18 actuators, 18 estimation sensors and 18 objective sensors). In a fully three-dimensional configuration,the interconnection between inputs and outputs becomes quickly unfeasible when the number of actuators and sensors increases in the spanswise direction. The objective of this work is to understand how an efficient controller may be designed by connecting only a subset of the actuators to sensors, thereby reducing the complexity of the controller, without comprising the efficiency. We find that using a semi-decentralized approach - where small control units consisting of 3 estimation sensors connected to 3 actuators are replicated 6 times along the spanwise direction - results only in a 11% reduction of control performance. Our results reveal that the best performance is obtained for a control unit which (i) is sufficiently wide to account for the full spanwise scale of the wavepacket when it reaches the actuators and (ii) is designed to account for the perturbations which are coming from the lateral sides (crosstalk) of the estimation sensors. We have also found that the influence of crosstalk is not as essential as the spreading effect.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。