In this note we develop a prelimit analysis of performance measures for importance sampling schemes related to small noise diffusion processes. In importance sampling the performance of any change of measure is characterized by its second moment. For a given change of measure, we characterize the second moment of the corresponding estimator as the solution to a PDE, which we analyze via a full asymptotic expansion with respect to the size of the noise and obtain a precise statement on its accuracy. The main correction term to the decay rate of the second moment solves a transport equation that can be solved explicitly. The asymptotic expansion that we obtain identifies the source of possible poor performance of nevertheless asymptotically optimal importance sampling schemes and allows for more accurate comparison among competing importance sampling schemes.
This paper introduces a new Importance Sampling scheme, called Adaptive Twisted Importance Sampling, which is adequate for the improved estimation of rare event probabilities in he range of moderate deviations pertaining to the empirical mean of real i.i.d. summands. It is based on a sharp approximation of the density of long runs extracted from a random walk conditioned on its end value.
We develop a theoretical framework for studying numerical estimation of lower previsions, generally applicable to two-level Monte Carlo methods, importance sampling methods, and a wide range of other sampling methods one might devise. We link consistency of these estimators to Glivenko-Cantelli classes, and for the sub-Gaussian case we show how the correlation structure of this process can be used to bound the bias and prove consistency. We also propose a new upper estimator, which can be used along with the standard lower estimator, in order to provide a simple confidence interval. As a case …
Importance sampling is a popular variance reduction method for Monte Carlo estimation, where a notorious question is how to design good proposal distributions. While in most cases optimal (zero-variance) estimators are theoretically possible, in practice only suboptimal proposal distributions are available and it can often be observed numerically that those can reduce statistical performance significantly, leading to large relative errors and therefore counteracting the original intention. In this article, we provide nonasymptotic lower and upper bounds on the relative error in importance samp…
We consider systems of slow--fast diffusions with small noise in the slow component. We construct provably logarithmic asymptotically optimal importance schemes for the estimation of rare events based on the moderate deviations principle. Using the subsolution approach we construct schemes and identify conditions under which the schemes will be asymptotically optimal. Moderate deviations--based importance sampling offers a viable alternative to large deviations importance sampling when the events are not too rare. In particular, in many cases of interest one can indeed construct the required c…
Improving Importance Sampling estimators for rare event probabilities requires sharp approx- imations of the optimal density leading to a nearly zero-variance estimator. This paper presents a new way to handle the estimation of the probability of a rare event defined as a finite intersection of subset. We provide a sharp approximation of the density of long runs of a random walk condi- tioned by multiples constraints, each of them defined by an average of a function of its summands as their number tends to infinity.
This note introduces a method for sampling Ising models with mixed boundary conditions. As an application of annealed importance sampling and the Swendsen-Wang algorithm, the method adopts a sequence of intermediate distributions that keeps the temperature fixed but turns on the boundary condition gradually. The numerical results show that the variance of the sample weights is relatively small.
In this paper we propose a dimension-reduction strategy in order to improve the performance of importance sampling in high dimension. The idea is to estimate variance terms in a small number of suitably chosen directions. We first prove that the optimal directions, i.e., the ones that minimize the Kullback--Leibler divergence with the optimal auxiliary density, are the eigenvectors associated to extreme (small or large) eigenvalues of the optimal covariance matrix. We then perform extensive numerical experiments that show that as dimension increases, these directions give estimations which are…
Multiple importance sampling (MIS) is an increasingly used methodology where several proposal densities are used to approximate integrals, generally involving target probability density functions. The use of several proposals allows for a large variety of sampling and weighting schemes. Then, the practitioner must choose a given scheme, i.e., sampling mechanism and weighting function. A variance analysis has been proposed in Elvira et al (2019, Statistical Science 34, 129-155), showing the superiority of the balanced heuristic estimator with respect to other competing schemes in some scenarios…
Sequential importance sampling algorithms have been defined to estimate likelihoods in models of ancestral population processes. However, these algorithms are based on features of the models with constant population size, and become inefficient when the population size varies in time, making likelihood-based inferences difficult in many demographic situations. In this work, we modify a previous sequential importance sampling algorithm to improve the efficiency of the likelihood estimation. Our procedure is still based on features of the model with constant size, but uses a resampling technique…
The goal of this paper is to develop provably efficient importance sampling Monte Carlo methods for the estimation of rare events within the class of linear stochastic partial differential equations (SPDEs). We find that if a spectral gap of appropriate size exists, then one can identify a lower dimensional manifold where the rare event takes place. This allows one to build importance sampling changes of measures that perform provably well even pre-asymptotically (i.e. for small but non-zero size of the noise) without degrading in performance due to infinite dimensionality or due to long simul…
Adaptive importance sampling is a widely spread Monte Carlo technique that uses a re-weighting strategy to iteratively estimate the so-called target distribution. A major drawback of adaptive importance sampling is the large variance of the weights which is known to badly impact the accuracy of the estimates. This paper investigates a regularization strategy whose basic principle is to raise the importance weights at a certain power. This regularization parameter, that might evolve between zero and one during the algorithm, is shown (i) to balance between the bias and the variance and (ii) to …
We describe a simple Importance Sampling strategy for Monte Carlo simulations based on a least squares optimization procedure. With several numerical examples, we show that such Least Squares Importance Sampling (LSIS) provides efficiency gains comparable to the state of the art techniques, when the latter are known to perform well. However, in contrast to traditional approaches, LSIS is not limited to the determination of the optimal mean of a Gaussian sampling distribution. As a result, it outperforms other methods when the ability to adjust higher moments of the sampling distribution, or to…
Reliability-oriented sensitivity analysis aims at combining both reliability and sensitivity analyses by quantifying the influence of each input variable of a numerical model on a quantity of interest related to its failure. In particular, target sensitivity analysis focuses on the occurrence of the failure, and more precisely aims to determine which inputs are more likely to lead to the failure of the system. The Shapley effects are quantitative global sensitivity indices which are able to deal with correlated input variables. They have been recently adapted to the target sensitivity analysis…
We show that the variance of the Monte Carlo estimator that is importance sampled from an exponential family is a convex function of the natural parameter of the distribution. With this insight, we propose an adaptive importance sampling algorithm that simultaneously improves the choice of sampling distribution while accumulating a Monte Carlo estimate. Exploiting convexity, we prove that the method's unbiased estimator has variance that is asymptotically optimal over the exponential family.
Importance sampling is often used in machine learning when training and testing data come from different distributions. In this paper we propose a new variant of importance sampling that can reduce the variance of importance sampling-based estimates by orders of magnitude when the supports of the training and testing distributions differ. After motivating and presenting our new importance sampling estimator, we provide a detailed theoretical analysis that characterizes both its bias and variance relative to the ordinary importance sampling estimator (in various settings, which include cases wh…
In this article, we address the issues that come up in the design of importance sampling schemes for rare events associated to stochastic dynamical systems. We focus on the issue of metastability and on the effect of multiple scales. We discuss why seemingly reasonable schemes that follow large deviations optimal paths may perform poorly in practice, even though they are asymptotically optimal. Pre-asymptotic optimality is important when one deals with metastable dynamics and we discuss possible ways as to how to address this issue. Moreover, we discuss how the effect of the multiple scales (e…
Among Monte Carlo techniques, the importance sampling requires fine tuning of a proposal distribution, which is now fluently resolved through iterative schemes. The Adaptive Multiple Importance Sampling (AMIS) of Cornuet et al. (2012) provides a significant improvement in stability and effective sample size due to the introduction of a recycling procedure. However, the consistency of the AMIS estimator remains largely open. In this work we prove the convergence of the AMIS, at a cost of a slight modification in the learning process. Contrary to Douc et al. (2007a), results are obtained here in…
Importance sampling is widely used in machine learning and statistics, but its power is limited by the restriction of using simple proposals for which the importance weights can be tractably calculated. We address this problem by studying black-box importance sampling methods that calculate importance weights for samples generated from any unknown proposal or black-box mechanism. Our method allows us to use better and richer proposals to solve difficult problems, and (somewhat counter-intuitively) also has the additional benefit of improving the estimation accuracy beyond typical importance sa…
The variance reduction established by importance sampling strongly depends on the choice of the importance sampling distribution. A good choice is often hard to achieve especially for high-dimensional integration problems. Nonparametric estimation of the optimal importance sampling distribution (known as nonparametric importance sampling) is a reasonable alternative to parametric approaches.In this article nonparametric variants of both the self-normalized and the unnormalized importance sampling estimator are proposed and investigated. A common critique on nonparametric importance sampling is…
The naive importance sampling estimator, based on samples from a single importance density, can be numerically unstable. Instead, we consider generalized importance sampling estimators where samples from more than one probability distribution are combined. We study this problem in the Markov chain Monte Carlo context, where independent samples are replaced with Markov chain samples. If the chains converge to their respective target distributions at a polynomial rate, then under two finite moment conditions, we show a central limit theorem holds for the generalized estimators. Further, we devel…
Bayesian inference under a set of priors, called robust Bayesian analysis, allows for estimation of parameters within a model and quantification of epistemic uncertainty in quantities of interest by bounded (or imprecise) probability. Iterative importance sampling can be used to estimate bounds on the quantity of interest by optimizing over the set of priors. A method for iterative importance sampling when the robust Bayesian inference rely on Markov chain Monte Carlo (MCMC) sampling is proposed. To accommodate the MCMC sampling in iterative importance sampling, a new expression for the effect…
School of Mathematics（数学学院）；University of Edinburgh（爱丁堡大学）
Minibatching is a very well studied and highly popular technique in supervised learning, used by practitioners due to its ability to accelerate training through better utilization of parallel processing power and reduction of stochastic variance. Another popular technique is importance sampling -- a strategy for preferential sampling of more important examples also capable of accelerating the training process. However, despite considerable effort by the community in these areas, and due to the inherent technical difficulty of the problem, there is no existing work combining the power of import…
In this note, we try to trace the birth of importance sampling (IS) back to 1949. We found the classical formulation of IS in a paper from Kahn in June 1949. As for the appearance of the expression importance sampling itself, it may have appeared a few months later, maybe in 1949 during conferences, but there is no published article with the name before 1950.
Uniform sampling of training data has been commonly used in traditional stochastic optimization algorithms such as Proximal Stochastic Gradient Descent (prox-SGD) and Proximal Stochastic Dual Coordinate Ascent (prox-SDCA). Although uniform sampling can guarantee that the sampled stochastic quantity is an unbiased estimate of the corresponding true quantity, the resulting estimator may have a rather high variance, which negatively affects the convergence of the underlying optimization procedure. In this paper we study stochastic optimization with importance sampling, which improves the converge…
Importance sampling is used to approximate Bayes' rule in many computational approaches to Bayesian inverse problems, data assimilation and machine learning. This paper reviews and further investigates the required sample size for importance sampling in terms of the $χ^2$-divergence between target and proposal. We develop general abstract theory and illustrate through numerous examples the roles that dimension, noise-level and other model parameters play in approximating the Bayesian update with importance sampling. Our examples also facilitate a new direct comparison of standard and optimal p…
Ratios of normalizing constants for two distributions are needed in both Bayesian statistics, where they are used to compare models, and in statistical physics, where they correspond to differences in free energy. Two approaches have long been used to estimate ratios of normalizing constants. The `simple importance sampling' (SIS) or `free energy perturbation' method uses a sample drawn from just one of the two distributions. The `bridge sampling' or `acceptance ratio' estimate can be viewed as the ratio of two SIS estimates involving a bridge distribution. For both methods, difficult problems…
Adaptive importance sampling is a class of techniques for finding good proposal distributions for importance sampling. Often the proposal distributions are standard probability distributions whose parameters are adapted based on the mismatch between the current proposal and a target distribution. In this work, we present an implicit adaptive importance sampling method that applies to complicated distributions which are not available in closed form. The method iteratively matches the moments of a set of Monte Carlo draws to weighted moments based on importance weights. We apply the method to Ba…
Adaptive importance sampling (AIS) uses past samples to update the \textit{sampling policy} $q_t$ at each stage $t$. Each stage $t$ is formed with two steps : (i) to explore the space with $n_t$ points according to $q_t$ and (ii) to exploit the current amount of information to update the sampling policy. The very fundamental question raised in this paper concerns the behavior of empirical sums based on AIS. Without making any assumption on the allocation policy $n_t$, the theory developed involves no restriction on the split of computational resources between the explore (i) and the exploit (i…
The Adaptive Multiple Importance Sampling (AMIS) algorithm is aimed at an optimal recycling of past simulations in an iterated importance sampling scheme. The difference with earlier adaptive importance sampling implementations like Population Monte Carlo is that the importance weights of all simulated values, past as well as present, are recomputed at each iteration, following the technique of the deterministic multiple mixture estimator of Owen and Zhou (2000). Although the convergence properties of the algorithm cannot be fully investigated, we demonstrate through a challenging banana shape…
We present a new method for conducting Monte Carlo inference in graphical models which combines explicit search with generalized importance sampling. The idea is to reduce the variance of importance sampling by searching for significant points in the target distribution. We prove that it is possible to introduce search and still maintain unbiasedness. We then demonstrate our procedure on a few simple inference tasks and show that it can improve the inference quality of standard MCMC methods, including Gibbs sampling, Metropolis sampling, and Hybrid Monte Carlo. This paper extends previous work…
The evaluation of the free energy of a stochastic model is considered a significant issue in various fields of physics and machine learning. However, the exact free energy evaluation is computationally infeasible because the free energy expression includes an intractable partition function. Annealed importance sampling (AIS) is a type of importance sampling based on the Markov chain Monte Carlo method that is similar to a simulated annealing and can effectively approximate the free energy. This study proposes an AIS-based approach, which is referred to as marginalized AIS (mAIS). The statistic…
Reducing the variance of the gradient estimator is known to improve the convergence rate of stochastic gradient-based optimization and sampling algorithms. One way of achieving variance reduction is to design importance sampling strategies. Recently, the problem of designing such schemes was formulated as an online learning problem with bandit feedback, and algorithms with sub-linear static regret were designed. In this work, we build on this framework and propose Avare, a simple and efficient algorithm for adaptive importance sampling for finite-sum optimization and sampling with decreasing s…
Adaptive Monte Carlo schemes developed over the last years usually seek to ensure ergodicity of the sampling process in line with MCMC tradition. This poses constraints on what is possible in terms of adaptation. In the general case ergodicity can only be guaranteed if adaptation is diminished at a certain rate. Importance Sampling approaches offer a way to circumvent this limitation and design sampling algorithms that keep adapting. Here I present a gradient informed variant of SMC (and its special case Population Monte Carlo) for static problems.
Sichuan University（四川大学）；Huazhong University of Technology（华中理工大学）；New York University（纽约大学）
Generative Adversarial Networks (GAN) training process, in most cases, apply Uniform or Gaussian sampling methods in the latent space, which probably spends most of the computation on examples that can be properly handled and easy to generate. Theoretically, importance sampling speeds up stochastic optimization in supervised learning by prioritizing training examples. In this paper, we explore the possibility of adapting importance sampling into adversarial learning. We use importance sampling to replace Uniform and Gaussian sampling methods in the latent space and employ normalizing flow to a…
In this paper, we propose an adaptive algorithm that iteratively updates both the weights and component parameters of a mixture importance sampling density so as to optimise the importance sampling performances, as measured by an entropy criterion. The method is shown to be applicable to a wide class of importance sampling densities, which includes in particular mixtures of multivariate Student t distributions. The performances of the proposed scheme are studied on both artificial and real examples, highlighting in particular the benefit of a novel Rao-Blackwellisation device which can be easi…
Stanford University（斯坦福大学）；Mila - University of Montreal（米拉研究所 - 蒙特利尔大学）
Off-policy policy estimators that use importance sampling (IS) can suffer from high variance in long-horizon domains, and there has been particular excitement over new IS methods that leverage the structure of Markov decision processes. We analyze the variance of the most popular approaches through the viewpoint of conditional Monte Carlo. Surprisingly, we find that in finite horizon MDPs there is no strict variance reduction of per-decision importance sampling or stationary importance sampling, comparing with vanilla importance sampling. We then provide sufficient conditions under which the p…
We propose a novel adaptive importance sampling algorithm which incorporates Stein variational gradient decent algorithm (SVGD) with importance sampling (IS). Our algorithm leverages the nonparametric transforms in SVGD to iteratively decrease the KL divergence between our importance proposal and the target distribution. The advantages of this algorithm are twofold: first, our algorithm turns SVGD into a standard IS algorithm, allowing us to use standard diagnostic and analytic tools of IS to evaluate and interpret the results; second, we do not restrict the choice of our importance proposal t…
In many stochastic problems, the output of interest depends on an input random vector mainly through a single random variable (or index) via an appropriate univariate transformation of the input. We exploit this feature by proposing an importance sampling method that makes rare events more likely by changing the distribution of the chosen index. Further variance reduction is guaranteed by combining this single-index importance sampling approach with stratified sampling. The dimension-reduction effect of single-index importance sampling also enhances the effectiveness of quasi-Monte Carlo metho…
An importance sampling approach for sampling copula models is introduced. We propose two algorithms that improve Monte Carlo estimators when the functional of interest depends mainly on the behaviour of the underlying random vector when at least one of the components is large. Such problems often arise from dependence models in finance and insurance. The importance sampling framework we propose is general and can be easily implemented for all classes of copula models from which sampling is feasible. We show how the proposal distribution of the two algorithms can be optimized to reduce the samp…
Adaptive importance sampling is a powerful tool to sample from complicated target densities, but its success depends sensitively on the initial proposal density. An algorithm is presented to automatically perform the initialization using Markov chains and hierarchical clustering. The performance is checked on challenging multimodal examples in up to 20 dimensions and compared to results from nested sampling. Our approach yields a proposal that leads to rapid convergence and accurate estimation of overall normalization and marginal distributions.
We propose a method to efficiently integrate truncated probability densities. The method uses Markov chain Monte Carlo method to sample from a probability density matching the function being integrated. The required normalisation or equivalently the result is obtained by constructing a function with known integral, through non-parametric kernel density estimation and variational procedure. The method is demonstrated with numerical case studies. Possible enhancements to the method and limitations are discussed.
Importance sampling is a Monte Carlo method that introduces a proposal distribution to sample the space according to the target distribution. Yet calibration of the proposal distribution is essential to achieving efficiency, thus the resort to adaptive algorithms to tune this distribution. In the paper, we propose a new adpative importance sampling scheme, named Tempered Anti-truncated Adaptive Multiple Importance Sampling (TAMIS) algorithm. We combine a tempering scheme and a new nonlinear transformation of the weights we named anti-truncation. For efficiency, we were also concerned not to in…
We consider the problem of off-policy evaluation in Markov decision processes. Off-policy evaluation is the task of evaluating the expected return of one policy with data generated by a different, behavior policy. Importance sampling is a technique for off-policy evaluation that re-weights off-policy returns to account for differences in the likelihood of the returns between the two policies. In this paper, we study importance sampling with an estimated behavior policy where the behavior policy estimate comes from the same set of data used to compute the importance sampling estimate. We find t…
